ASTM F467-98

Standard Specification for Nonferrous Nuts for General Use

SCOPE
1.1 This specification covers the requirements for commercial wrought nonferrous nuts 0.250 to 1.500 in. inclusive in diameter in a number of alloys in common use and intended for general service applications.
1.2 Applicable bolts, cap screws, and studs for use with nuts covered by this specification are covered by Specification F 468.
Note 1—A complete metric companion to Specification F 467 has been developed—F 467M; therefore no metric equivalents are presented in this specification.

General Information

• Status: Historical
• Publication Date: 09-Oct-2001
• ICS: 21.060.20 - Nuts
• Technical Committee: F16 - Fasteners
• Drafting Committee: F16.04 - Nonferrous Fasteners

Relations

• Replaced By: ASTM F467-01 - Standard Specification for Nonferrous Nuts for General Use
• Effective Date: 10-Oct-2001
• Referred By: ASTM F1718-01(2019) - Standard Specification for Rotary Positive Displacement Distillate Fuel Pumps
• Effective Date: 10-Oct-2001
• Referred By: ASTM C1802-23 - Standard Specification for Design, Testing, Manufacture, Selection, and Installation of Horizontal Fabricated Metal Access Hatches for Utility, Water, and Wastewater Structures
• Effective Date: 10-Oct-2001
• Referred By: ASTM F468-23 - Standard Specification for Nonferrous Bolts, Hex Cap Screws, Socket Head Cap Screws, and Studs for General Use
• Effective Date: 10-Oct-2001
• Referred By: ASTM B745/B745M-15(2021) - Standard Specification for Corrugated Aluminum Pipe for Sewers and Drains
• Effective Date: 10-Oct-2001
• Referred By: ASTM F1155-10(2019) - Standard Practice for Selection and Application of Piping System Materials
• Effective Date: 10-Oct-2001
• Referred By: ASTM B746/B746M-22 - Standard Specification for Corrugated Aluminum Alloy Structural Plate for Field-Bolted Pipe, Pipe-Arches, and Arches
• Effective Date: 10-Oct-2001
• Referred By: ASTM F1370-92(2019)e1 - Standard Specification for Pressure-Reducing Valves for Water Systems, Shipboard
• Effective Date: 10-Oct-2001
• Referred By: ASTM F1508-96(2021) - Standard Specification for Angle Style, Pressure Relief Valves for Steam, Gas, and Liquid Services
• Effective Date: 10-Oct-2001

Standards Content (Sample)

NOTICE: This standard has either been superseded and replaced by a new version or discontinued.
Contact ASTM International (www.astm.org) for the latest information.
Designation: F 467 – 98
Standard Specification for
1
Nonferrous Nuts for General Use
This standard is issued under the fixed designation F 467; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (e) indicates an editorial change since the last revision or reapproval.
This standard has been approved for use by agencies of the Department of Defense.
1. Scope E 76 Test Methods for Chemical Analysis of Nickel-Copper
6
Alloys
1.1 This specification covers the requirements for commer-
E 92 Test Method for Vickers Hardness of Metallic Mate-
cial wrought nonferrous nuts 0.250 to 1.500 in. inclusive in
4
rials
diameter in a number of alloys in common use and intended for
E 101 Test Method for Spectrographic Analysis of Alumi-
general service applications.
num and Aluminum Alloys by the Point-to-Plane Tech-
1.2 Applicable bolts, cap screws, and studs for use with nuts
7
nique
covered by this specification are covered by Specification
E 120 Test Methods for Chemical Analysis of Titanium and
F 468.
6
Titanium Alloys
8
NOTE 1—A complete metric companion to Specification F 467 has been
E 165 Practice for Liquid Penetrant Inspection Method
developed—F 467M; therefore no metric equivalents are presented in this
E 227 Test Method for Optical Emission Spectrometric
specification.
Analysis of Aluminum and Aluminum Alloys by the
7
Point-to-Plane Technique
2. Referenced Documents
E 354 Test Methods for Chemical Analysis of High-
2.1 ASTM Standards:
Temperature, Electrical, Magnetic, and Other Similar Iron,
B 154 Test Method for Mercurous Nitrate Test for Copper
6
2 Nickel, and Cobalt Alloys
and Copper Alloys
E 478 Test Methods for Chemical Analysis of Copper
3
D 3951 Practice for Commercial Packaging
6
Alloys
E 18 Test Methods for Rockwell Hardness and Rockwell
E 1409 Test Method for Determination of Oxygen in Tita-
4
Superficial Hardness of Metallic Materials
nium and Titanium Alloys by the Inert Gas Fusion Tech-
E 29 Practice for Using Significant Digits in Test Data to
7
nique
5
Determine Conformance with Specifications
F 468 Specification for Nonferrous Bolts, Hex Cap Screws,
E 34 Test Methods for Chemical Analysis of Aluminum and
9
6 and Studs for General Use
Aluminum Base Alloys
F 606 Test Methods for Determining the Mechanical Prop-
E 38 Methods for Chemical Analysis of Nickel-Chromium
6 erties of Externally and Internally Threaded Fasteners,
and Nickel-Chromium-Iron Alloys
9
6 Washers, and Rivets
E 53 Test Methods for Chemical Analysis of Copper
F 1470 Guide for Fastener Sampling for Specified Mechani-
E 54 Test Methods for Chemical Analysis of Special
9
6 cal Properties and Performance Inspection
Brasses and Bronzes
2.2 American National Standards:
E 55 Practice for Sampling Wrought Nonferrous Metals and
6 B 1.1 Unified Inch Screw Threads (UN and UNR Thread
Alloys for Determination of Chemical Composition
10
Form)
E 62 Test Methods for Chemical Analysis of Copper and
10
B 18.2.2 Square and Hex Nuts
6
Copper Alloys (Photometric Methods)
E 75 Test Methods for Chemical Analysis of Copper-Nickel
3. Ordering Information
6
and Copper-Nickel-Zinc Alloys
3.1 Orders for nuts under this specification shall include the
following information:
1 3.1.1 Quantity (number of pieces of each item and size),
This specification is under the jurisdiction of ASTM Committee F-16 on
Fasteners and is the direct responsibility of Subcommittee F16.04 on Nonferrous 3.1.2 Name of item,
Fasteners.
3.1.3 Size (diameter and threads per inch),
Current edition approved Oct. 10, 1998. Published December 1998. Originally
published as F 467 – 76 T. Last previous edition F 467 – 97.
2 7
Annual Book of ASTM Standards, Vol 02.01. Annual Book of ASTM Standards, Vol 03.06.
3 8
Annual Book of ASTM Standards, Vol 15.09. Annual Book of ASTM Standards, Vol 03.03.
4 9
Annual Book of ASTM Standards, Vol 03.01. Annual Book of ASTM Standards, Vol 01.08.
5 10
Annual Book of ASTM Standards, Vol 14.02. Available from American National Standards Institute, 11 W. 42nd St., 13th
6
Annual Book of ASTM Standards, Vol 03.05. Floor, New York, NY 10036.
Copyright © ASTM, 100 Barr Harbor Drive, West Conshohocken, PA 19428-2959, United States.
1

---------------------- Page: 1 ----------------------
F 467
2
TABLE 1 Chemical Requirements
Composition, %
Copper and Copper-Base Alloys
UNS
Designa-
Man-
Alumi- Copper, Iron, Nickel, Phos- Zinc, Lead, Arsenic,
tion
Alloy General Name ganese, Silicon Tin
A
num min max max phorus max max max
Number
max
C11000 110 ETP copper 99.9
C27000 270 brass 63.0–68.5 0.07 balance 0.10
C46200 462 naval brass 62.0–65.0 0.10 balance 0.20 0.5–1.0
C46400 464 naval brass 59.0–62.0 0.10 balance 0.20 0.5–1.0
A
C51000 510 phosphor br
...