prEN 3155-071

Aerospace series - Electrical contacts used in elements of connection - Part 071: Contacts, electrical, female, type A, crimp, class S - Product standard

This document specifies the required characteristics, tests and tooling applicable to female electrical contacts 071, type A, crimp, class S used in elements of connection according to EN 3155-002.
It shall be used together with EN 3155-001.
The associated male contacts are specified in EN 3155-008 and EN 3155-070.

Luft- und Raumfahrt - Elektrische Kontakte zur Verwendung in Verbindungselementen - Teil 071: Elektrische Buchsenkontakte, Typ A, crimpbar, Klasse S - Produktnorm

Série aérospatiale - Contacts électriques utilisés dans les organes de connexion - Partie 071 : Contacts électriques, femelles, type A, à sertir, classe S - Norme de produit

Le présent document spécifie les caractéristiques requises, les essais et l’outillage applicables aux contacts électriques femelles 071, de type A, à sertir, de classe S, utilisés dans les organes de connexion suivant l’EN 3155-002.
Il doit être utilisé conjointement avec l’EN 3155-001.
Les contacts mâles associés sont spécifiés dans l’EN 3155-008 et l’EN 3155-070.

Aeronavtika - Električni kontakti za uporabo v veznih elementih - 071. del: Kontakti, električni, ženski, tip A, nagubani, razred S - Standard za proizvod

General Information

• Status: Not Published
• Publication Date: 01-Sep-2024
• ICS: 49.060 - Aerospace electric equipment and systems
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 2/S 3 - Elements of Connection (Connectors, Contacts, rear accessories, crimping tools
• Current Stage: 4060 - Closure of enquiry - Enquiry
• Start Date: 25-May-2023
• Completion Date: 25-May-2023
• Ref Project: oSIST prEN 3155-071:2023 - Aerospace series - Electrical contacts used in elements of connection - Part 071: Contacts, electrical, female, type A, crimp, class S - Product standard

Relations

• Revises: EN 3155-071:2019 - Aerospace series - Electrical contacts used in elements of connection - Part 071: Contacts, electrical, female, type A, crimp, class S - Product standard
• Effective Date: 18-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 3155-071:2023
01-maj-2023
Nadomešča:
SIST EN 3155-071:2019
Aeronavtika - Električni kontakti za uporabo v veznih elementih - 071. del:
Kontakti, električni, ženski, tip A, nagubani, razred S - Standard za proizvod
Aerospace series - Electrical contacts used in elements of connection - Part 071:
Contacts, electrical, female, type A, crimp, class S - Product standard
Luft- und Raumfahrt - Elektrische Kontakte zur Verwendung in Verbindungselementen -
Teil 071: Elektrische Buchsenkontakte, Typ A, crimpbar, Klasse S - Produktnorm
Série aérospatiale - Contacts électriques utilisés dans les organes de connexion - Partie
071 : Contacts électriques, femelles, type A, à sertir, classe S - Norme de produit
Ta slovenski standard je istoveten z: prEN 3155-071
ICS:
49.060 Letalska in vesoljska Aerospace electric
električna oprema in sistemi equipment and systems
oSIST prEN 3155-071:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 3155-071:2023

---------------------- Page: 2 ----------------------
oSIST prEN 3155-071:2023


DRAFT
EUROPEAN STANDARD
prEN 3155-071
NORME EUROPÉENNE

EUROPÄISCHE NORM

March 2023
ICS 49.060 Will supersede EN 3155-071:2019
English Version

Aerospace series - Electrical contacts used in elements of
connection - Part 071: Contacts, electrical, female, type A,
crimp, class S - Product standard
Série aérospatiale - Contacts électriques utilisés dans Luft- und Raumfahrt - Elektrische Kontakte zur
les organes de connexion - Partie 071 : Contacts Verwendung in Verbindungselementen - Teil 071:
électriques, femelles, type A, à sertir, classe S - Norme Elektrische Buchsenkontakte, Typ A, crimpbar, Klasse
de produit S - Produktnorm
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee ASD-
STAN.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 3155-071:2023 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 3155-071:2023
prEN 3155-071:2023 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Required characteristics . 5
4.1 Specific characteristics . 5
4.2 Dimensions and mass . 5
4.3 Marking by colour code .
...