ASD-STAN/D 2/S 3 - Elements of Connection (Connectors, Contacts, rear accessories, crimping tools

This document specifies the performance and contact arrangements of circular electrical connectors, coupled by threaded ring. It also lists the product standards and models available for selection in this series.

This document specifies the general characteristics, the conditions for qualification, acceptance and quality assurance, as well as the test programs and groups for threaded ring coupling circular connectors, fire resistant, intended for use in a temperature range from -65 °C to 175 °C continuous or 200 °C continuous according to the classes.

This document specifies the required characteristics, tests and tooling applicable to male electrical contacts 008, type A, crimp, class S, used in elements of connection according to EN 3155-002.
It is used together with EN 3155-001.
The associated female contacts are defined in EN 3155-003 and EN 3155-009.

This document specifies the characteristics of hermetic jam-nut mounted receptacles in the family of circular electrical connectors coupled by threaded ring.
It applies to the class defined in Table 4.
For plugs and protective covers, see EN 2997-008 and EN 2997-009 respectively. For spare jam-nuts and O-rings, see EN 2997-012 and EN 2997-013 respectively.

This document specifies methods of measuring thickness of electro-deposited gold or gold alloys coatings on contacts of elements of connection.

This document specifies the characteristics of jam-nut mounted receptacles in the family of circular electrical connectors coupled by threaded ring.
It applies to the class defined in Table 4.
For contacts, filler plugs, and rear accessories associated with this receptacle, see EN 2997-002. For plugs and protective covers, see EN 2997-008 and EN 2997-009 respectively. For spare jam-nuts and o-rings, see EN 2997-012 and EN 2997-013 respectively.

This document specifies methods of verifying adhesion of electrodeposited gold and gold alloy coatings on contacts.

This document defines the single module receptacle used in the family of rectangular electrical connectors. The plug corresponding to this receptacle is defined in EN 4165-024. Accessories and protective cover corresponding to those plugs are defined in EN 4165-026. The cavity of this connector is uncoded, so it can accept polarized modules N, A, B, C and D as defined in EN 4165-002.

This document provides a list of removable sealing sleeves as defined in the product standards for use in connectors or other electrical elements of connection.

This document specifies the required characteristics of sealing plugs, class T, for use in elements of electrical and optical connection containing cable (wire) sealing grommets, according to EN 4529-002. It is intended to be used together with EN 4529-001.

This product standard defines a range of cable outlets, style K, straight, shielded, sealed, self-locking (anti-rotational), heat shrinkable boot, and / or metallic bands for use under the following conditions:
The mating connectors are listed in EN 3660-002.
Temperature range,   
Class N   :   - 65 °C to 200 °C;
Class K   :   - 65 °C to 260 °C;
Class W   :   - 65 °C to 175 °C;
Class T   :   - 65 °C to 175 °C (Nickel PTFE plating);
Class Z   :    - 65 °C to 175 °C (Black zinc nickel plating).
Associated electrical accessories: EN 3660-033 Metallic band (for shield termination).
These cable outlets are designed for termination of overall shielding braid and / or individual cable shields. They accommodate/permit the termination of heat shrinkable boots.

This document defines a range of cable outlets, style K, 90°, shielded, sealed, self-locking (anti rotational) for heat shrinkable boot, and or with metallic bands under the following conditions.
The mating connectors are listed in EN 3660-002.
Temperature range,
Class N : -65 °C to 200 °C;
Class K : -65 °C to 260 °C;
Class W : -65 °C to 175 °C;
Class T : -65 °C to 175 °C (Nickel PTFE plating);
Class Z : -65 °C to 175 °C (Black zinc nickel plating).
Associated electrical accessories : EN 3660-033 Metallic band (for shield termination).
These cable outlets are designed for termination of overall shielding braid and/or individual cable shields. They accommodate/permit the termination of heat shrinkable boots.

This document specifies the required characteristics, tests and tooling applicable to female electrical
quadrax contacts, shielded, size 8, type E characteristic impedance 100 Ω, crimp, class R, used in
elements of connection according to EN 3155-002.
It is used together with EN 3155-001.
The associated male contacts are defined in EN 3155-074

This product standard defines a range of cable outlets, style K, straight, shielded, sealed, self-locking (anti-rotational), heat shrinkable boot, and / or metallic bands for use under the following conditions:
Associated electrical connector(s) EN 3660-002.
Temperature range,   Class N   :   - 65 °C to 200 °C;
Class K   :   - 65 °C to 260 °C;
Class W   :   - 65 °C to 175 °C;
Class T   :   - 65 °C to 175 °C (Nickel PTFE plating);
Class Z   :    - 65 °C to 175 °C (Black zinc nickel plating).
Associated electrical accessories: EN 3660-033 Metallic band (for shield termination).
These cable outlets are designed for termination of overall shielding braid and/or individual cable shields. They accommodate/permit the termination of heat shrinkable boots.

This product standard defines a range of cable outlets, style K, 90°, shielded, sealed, self-locking (antirotational), for heat shrinkable boot, and/ or metallic bands for use under the following conditions:
The mating connectors are listed in EN 3660-002.
Temperature range, Class N : − 65 °C to 200 °C;
Class K : − 65 °C to 260 °C;
Class W : − 65 °C to 175 °C;
Class T : − 65 °C to 175 °C (Nickel PTFE plating);
Class Z : − 65 °C to 175 °C (Black zinc nickel plating).
Associated electrical accessories: EN 3660-033 Metallic band (for shield termination).
These cable outlets are designed for termination of overall shielding braid and/or individual cable
shields. They accommodate/permit the termination of heat shrinkable boots.

This document defines a range of cable outlets, style A, straight, unsealed with clamp strain relief for use under the following conditions:
Associated electrical connector(s): EN 3660-002
Temperature range,   Class N:   -65 °C to 200 °C
Class W:   -65 °C to 175 °C
Class K:   -65 °C to 260 °C
Class A:   -65 °C to 200 °C
Class T:   -65 °C to 175 °C (nickel PTFE plating)
Class Z:   -65 °C to 175 °C (black zinc nickel plating)

This document defines a range of grommet nuts, style A, for use under the following conditions:
Associated electrical connector(s):   EN 3660-002
Temperature range,   Class N:   -65 °C to 200 °C
Class W:   -65 °C to 175 °C
Class K:   -65 °C to 260 °C
Class A:   -65 °C to 200 °C
Class T:   -65 °C to 175 °C
Class Z:   -65 °C to 175 °C

This document defines a range of cable outlets, style A, 90°, unsealed with clamp strain relief for use under the following conditions:
Associated electrical connector(s): EN 3660-002
Temperature range,   Class N:   -65 °C to 200 °C
Class W:   -65 °C to 175 °C
Class K:   -65 °C to 260 °C
Class A:   -65 °C to 260 °C
Class T:   -65 °C to 175 °C (nickel PTFE plating)
Class Z:   -65 °C to 175 °C (black zinc nickel plating)

This document specifies the characteristics of dummy receptacles in the family of circular electrical connectors coupled by threaded ring.
It applies to the class defined in Table 3.
For plugs associated with these dummy receptacles, see EN 2997-008.

This document defines the insertion/extraction tool for removal of modules used in the family of rectangular electrical connectors.

This document specifies the required characteristics and tests applicable to female electrical contacts 079, type A, crimp, class S, used in elements of connection according to EN 3155-002.
It shall be used together with EN 3155-001.
The associated male contacts are defined in EN 3155-078.

This document specifies the required characteristics and tests applicable to female electrical contacts 081, type A, crimp, class T, used in elements of connection according to EN 3155 002.
It shall be used together with EN 3155 001.
The associated male contacts are defined in EN 3155 080

This document specifies the required characteristics and tests applicable to male electrical contacts 080, type A, crimp, class T, used in elements of connection according to EN 3155-002.
It shall be used together with EN 3155-001.
The associated female contacts are defined in EN 3155-081.

This European Standard specifies the required characteristics and tests applicable to male electrical contacts 078, type A, crimp, class S, used in elements of connection according to EN 3155 002.
It shall be used together with EN 3155-001.
The associated female contacts are defined in EN 3155-079.

This European Standard specifies the required characteristics, tests and tooling applicable to male electrical contacts 014, type A, crimp, class S, used in elements of connection according to EN 3155-002.
It shall be used together with EN 3155-001.
The associated female contacts are defined in EN 3155-015.

This European Standard defines cable outlet accessories for use with circular and rectangular, electrical and optical connectors on aerospace equipment. These may be sealed or unsealed and include accessories suitable for the suppression of radio frequency and electromagnetic interference.
This European Standard is used in conjunction with circular and rectangular electrical and optical connectors for varying temperature ranges, environmental conditions, fire resistant and non-fire resistant applications as designated in the product standards.

This European Standard specifies the required characteristics, tests and tooling applicable to female electrical contacts 015, type A, crimp, class S, used in elements of connection according to EN 3155-002.
It shall be used together with EN 3155-001.
The associated male contacts are defined in EN 3155-014

This European Standard specifies the required characteristics, tests and tooling applicable to female electrical contacts 082, type A, crimp, class S used in elements of connection according to EN 3155-002.
It shall be used together with EN 3155-001.
The associated male contacts are defined in EN 3155-008 and EN 3155-070.

This European Standard defines a range of cable outlets, style A, 90°, unsealed with clamp strain relief for use under the following conditions:
Associated electrical connector(s)   :   EN 3660-002
Temperature range,   Class N   :   - 65 °C to 200 °C
   Class W   :   - 65 °C to 175 °C
   Class K   :   -65 °C to 260 °C
   Class A   :   - 65 °C to 260 °C
   Class T   :   - 65 °C to 175 °C
   Class Z   :   - 65 °C to 175 °C

This document defines a range of cable outlets, style A, straight, unsealed with clamp strain relief for use under the following conditions:
Associated electrical connector(s)   :   EN 3660-002
Temperature range,   Class N   :   - 65 °C to 200 °C
Class W   :   - 65 °C to 175 °C
Class K   :   - 65 °C to 260 °C
Class A   :   - 65 °C to 200 °C
Class T   :   - 65 °C to 175 °C (Nickel PTFE plating)
Class Z   :   - 65 °C to 175 °C (Black zinc nickel plating)

This document defines accessories of single modules connectors according to EN 4165 024 and EN 4165 025 used in the family of rectangular electrical connectors.

This European Standard defines a range of grommet nuts, style A, for use under the following conditions:
Associated electrical connector(s) : EN 3660-002
Temperature range, Class N : − 65 °C to 200 °C
Class W : − 65 °C to 175 °C
Class K : − 65 °C to 260 °C
Class A : − 65 °C to 200 °C

This document defines a range of cable outlets, style A, 90°, unsealed with clamp strain relief for use under the following conditions:
Associated electrical connector(s)   :   EN 3660-002
Temperature range,   Class N   :   - 65 °C to 200 °C
   Class W   :   - 65 °C to 175 °C
   Class K   :   - 65 °C to 260 °C
   Class A   :   - 65 °C to 260 °C
   Class T   :   - 65 °C to 175 °C (Nickel PTFE plating)
   Class Z   :   - 65 °C to 175 °C (Black zinc nickel plating)