EN 13892-6:2002

Methods of test for screed materials - Part 6: Determination of surface hardness

This European standard specifies a method for determining the surface hardness of moulded mortar specimens made from magnesite screed material or from cementitious screed-, calcium sulfate screed-, and synthetic resin screed material with fine aggregates (

Prüfverfahren für Estrichmörtel und Estrichmassen - Teil 6: Bestimmung der Oberflächenhärte

Diese Europäische Norm legt ein Verfahren zur Bestimmung der Oberflächenhärte von geformten Mörtel-Prüf-körpern aus Magnesiaestrichmörtel oder aus Zementestrich-, Calciumsulfatestrich- und Kunstharzestrichmörteln fest. Dieses Verfahren ist nur für Estrichmörtel und -massen mit Zuschlägen geeignet, deren Korngröße weniger als 4 mm beträgt.

Méthodes d'essai des matériaux pour chapes - Partie 6: Détermination de la dureté superficielle

La présente Norme européenne spécifie une méthode permettant de déterminer la dureté de surface sur des éprouvettes de mortier moulées, confectionnées avec des matériaux pour chapes à base de magnésie ou avec des matériaux pour chapes à base de ciment, de sulfate de calcium, de magnésie ou de résine synthétique. Cette méthode ne convient que pour les matériaux pour chapes qui contiennent des agrégats de moins de 4 mm.

Metode preskušanja za mešanice za estrih – 6. del: Določevanje trdote površine

General Information

• Status: Published
• Publication Date: 19-Nov-2002
• Withdrawal Date: 30-May-2003
• ICS: 91.100.10 - Cement. Gypsum. Lime. Mortar
• Technical Committee: CEN/TC 303 - Floor screeds and in-situ floorings in buildings
• Drafting Committee: CEN/TC 303/WG 2 - Test methods
• Current Stage: 9060 - Closure of 2 Year Review Enquiry - Review Enquiry
• Start Date: 03-Jun-2024
• Completion Date: 03-Jun-2024
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Mandate: M/132 - Addenda to the mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on circulation fixtures, structural bearings and floorings
• Ref Project: SIST EN 13892-6:2003 - Methods of test for screed materials - Part 6: Determination of surface hardness

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Prüfverfahren für Estrichmörtel und Estrichmassen - Teil 6: Bestimmung der OberflächenhärteMéthodes d'essai des matériaux pour chapes - Partie 6: Détermination de la dureté superficielleMethods of test for screed materials - Part 6: Determination of surface hardness91.100.10Cement. Mavec. Apno. MaltaCement. Gypsum. Lime. MortarICS:Ta slovenski standard je istoveten z:EN 13892-6:2002SIST EN 13892-6:2003en01-september-2003SIST EN 13892-6:2003SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13892-6November 2002ICS 91.100.10English versionMethods of test for screed materials - Part 6: Determination ofsurface hardnessMéthodes d'essai des matériaux pour chapes - Partie 6:Détermination de la dureté superficiellePrüfverfahren für Estrichmörtel und Estrichmassen - Teil 6:Bestimmung der OberflächenhärteThis European Standard was approved by CEN on 9 October 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2002 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13892-6:2002 ESIST EN 13892-6:2003
...