EN 13892-7:2003

Methods of test for screed materials - Part 7: Determination of wear resistance to rolling wheel of screed material with floor coverings

This European Standard specifies a method for determining the resistance to a loaded rolling wheel on moulded mortar specimens made from cementitious screed- calcium sulfate screed-, asphalt screed-, magnesite screed-, and synthetic resin screed material with a floor covering.

Prüfverfahren für Estrichmörtel und Estrichmassen - Teil 7: Bestimmung des Widerstandes gegen Rollbeanspruchung von Estrichen mit Bodenbelägen

Méthodes d'essai des matériaux de chapes - Partie 7: Détermination de la résistance à l'usure par roulette pivotante des matériaux de chape avec revêtements de sol

La présente Norme européenne spécifie une méthode permettant de déterminer la résistance à l'usure par roulette pivotante chargée, sur des éprouvettes de mortier moulées, confectionnées avec des matériaux pour chapes à base ciment, de sulfate de calcium, d'asphalte, de magnésie ou de résine synthétique et recouverts d'un revêtement de sol.

Metode preskušanja za mešanice za estrih – 7. del: Določevanje odpornosti mešanice za estrih s talnimi oblogami proti obrabi zaradi koles

General Information

• Status: Published
• Publication Date: 03-Jun-2003
• Withdrawal Date: 30-Dec-2003
• ICS: 91.100.10 - Cement. Gypsum. Lime. Mortar
• Technical Committee: CEN/TC 303 - Floor screeds and in-situ floorings in buildings
• Drafting Committee: CEN/TC 303/WG 2 - Test methods
• Current Stage: 9060 - Closure of 2 Year Review Enquiry - Review Enquiry
• Start Date: 03-Jun-2024
• Completion Date: 03-Jun-2024
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Ref Project: SIST EN 13892-7:2003 - Methods of test for screed materials - Part 7: Determination of wear resistance to rolling wheel of screed material with floor coverings

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Methods of test for screed materials - Part 7: Determination of wear resistance to rolling wheel of screed material with floor coveringsSRUQRVWLMéthodes d'essai des matériaux de chapes - Partie 7: Détermination de la résistance a l'usure par roulette pivotante des matériaux de chape avec revetements de solPrüfverfahren für Estrichmörtel und Estrichmassen - Teil 7: Bestimmung des Widerstandes gegen Rollbeanspruchung von Estrichen mit Bodenbelägen91.100.10Cement. Mavec. Apno. MaltaCement. Gypsum. Lime. MortarICS:SIST EN 13892-7:2003enTa slovenski standard je istoveten z:EN 13892-7:200301-september-2003SIST EN 13892-7:2003SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13892-7June 2003ICS 91.100.10English versionMethods of test for screed materials - Part 7: Determination ofwear resistance to rolling wheel of screed material with floorcoveringsMéthodes d'essai des matériaux de chape - Partie 7:Détermination de la résistance à l'usure par roulettepivotante des matériaux de chape avec revêtements de solPrüfverfahren für Estrichmörtel und Estrichmassen - Teil 7:Bestimmung des Widerstandes gegen Rollbeanspruchungvon Estrichen mit BodenbelägenThis European Standard was approved by CEN on 3 April 2003.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13892-7:2003 E
...