EN 4708-002:2023

Aerospace series - Sleeving, heat-shrinkable, for binding, insulation and identification - Part 002: Index of Product standards

This document lists the product standards, covered by technical specification EN 4708-001, for heat shrinkable sleeves.

Luft- und Raumfahrt - Wärmeschrumpfender Schlauch zur Befestigung, Isolierung und Identifizierung - Teil 002: Übersicht über die Produktnormen

Dieses Dokument führt die Produktnormen für wärmeschrumpfende Schläuche auf, die durch die Technischen Lieferbedingungen EN 4708 001 abgedeckt sind.

Série aérospatiale - Manchons thermorétractables, de jonction, isolement et identification - Partie 002 : Index des normes de produits

Le présent document répertorie les normes de produits couvertes par la spécification technique EN 4708-001 pour les manchons thermorétractables.

Aeronavtika - Toplotno skrčljiva cev za utrjevanje, izolacijo in identifikacijo - 002. del: Seznam standardov za proizvod

Ta dokument navaja standarde za izdelke, ki jih zajema tehnična specifikacija standarda EN 4708-001 za toplotno
skrčljive cevi.

General Information

• Status: Published
• Publication Date: 19-Dec-2023
• ICS: 49.060 - Aerospace electric equipment and systems
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 2/S 8 - Installation Technologies
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 20-Dec-2023
• Completion Date: 20-Dec-2023
• Ref Project: SIST EN 4708-002:2024 - Aerospace series - Sleeving, heat-shrinkable, for binding, insulation and identification - Part 002: Index of Product standards

Standards Content (Sample)

SLOVENSKI STANDARD
01-februar-2024
Aeronavtika - Toplotno skrčljiva cev za utrjevanje, izolacijo in identifikacijo - 002.
del: Seznam standardov za proizvod
Aerospace series - Sleeving, heat-shrinkable, for binding, insulation and identification -
Part 002: Index of Product standards
Luft- und Raumfahrt - Wärmeschrumpfender Schlauch zur Befestigung, Isolierung und
Identifizierung - Teil 002: Übersicht über die Produktnormen
Série aérospatiale - Manchons thermorétractables, de jonction, isolement et identification
- Partie 002 : Index des normes de produits
Ta slovenski standard je istoveten z: EN 4708-002:2023
ICS:
49.025.40 Guma in polimerni materiali Rubber and plastics
49.060 Letalska in vesoljska Aerospace electric
električna oprema in sistemi equipment and systems
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN 4708-002
EUROPEAN STANDARD
NORME EUROPÉENNE
December 2023
EUROPÄISCHE NORM
ICS 49.060
English Version
Aerospace series - Sleeving, heat-shrinkable, for binding,
insulation and identification - Part 002: Index of Product
standards
Série aérospatiale - Manchons thermorétractables, de Luft- und Raumfahrt - Wärmeschrumpfender Schlauch
jonction, isolement et identification - Partie 002 : Index zur Befestigung, Isolierung und Identifizierung - Teil
des normes de produits 002: Übersicht über die Produktnormen
This European Standard was approved by CEN on 30 October 2022.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 4708-002:2023 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Index of product standards . 4
Bibliography . 7

European foreword
This document (EN 4708-002:2023) has been prepared by the Aerospace and Defence Industries
Association of Europe — Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this document has
received the approval of the National Associations and the Official Services of the member countries of
ASD-STAN, prior to its presentation to CEN.
This document shall be given the status of a national standard, either by publication of an identical text
or by endorsement, at the latest by June 2024, and conflicting national standards shall be withdrawn at
the latest by June 2024.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this document: Austria, Belgium, Bulgaria, Croatia, Cyprus,
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of North
Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the United
Kingdom.
1 Scope
This document lists the product standards, covered by technical specification EN 4708-001, for heat
shrinkable sleeves.
2 Normative references
There are no normative references in this document.
3 Terms and definitions
No terms and definitions are listed in this document.
ISO and IEC maintain terminology databases for use in standardization at the following addresses:
— ISO Online browsing platform: available at https://www.iso.org/obp/
— IEC Electropedia: available at https://www.electropedia.org/
4 Index of product standards
Table 1 lists the product standards.
Series 100: heat-shrinkable sleeves.
Series 200: heat-shrinkable identification sleeves.
Series 300: heat-shrinkable adhesive lined sleeves.
Table 1 — List of product standards (1 of 3)
EN 4708-product Description of product standard
standard
Heat-shrinkable sleeves
101 Heat-shrinkable polyolefin sleeves
Temperature range −55 °C to 135 °C
• Type A: very flexible, flame retarded, shrink ratio 2:1
This sleeving has very good flexibility, is flame retarded and will shrink
at low temperatures. It is suitable where sensitive components and
delicate wiring need protection from excessive heat during shrinking.
• Type B: flexible, flame retarded, shrink ratio 2:1, 3:1 and 4:1
This sleeving is flexible and flame retarded. It is suitable for general
purposes and is available with high shrink ratios.
• Type C: flexible, not flame retarded, shrink ratio 2:1and 3:1
This sleeving is flexible and not flame retarded and is available in two
shrink ratios.
• Type D: semi-rigid, flame retarded, shrink ratio 2:1
This sleeving is semi-rigid and flame retarded. It is suitable where strain
relief and mechanical support are required.
Table 1 — List of product standards (2 of 3)
EN 4708-product Description of product standard
standard
Heat-shrinkable sleeves
102 Heat-shrinkable very flexible/flexible polymers sleeves
Temperature range −55 °C to 150 °C
This sleeving has very good flexibility, is flame retarded and has a thick
wall for mechanical protection. It is suitable for use as cable pro
...