EN 16293:2013

Packaging - Glass Packaging - Deep BVS finishes for still wines

This European Standard specifies dimensions of a series of deep screw finishes for the closure of wines with a CO2 content below 1,2 grams per litre.
NOTE   Carbonation >1,2 g/l CO2 requires a suitable container and closure agreed between the glass maker, closure maker and packer/filler.

Verpackung - Verpackungen aus Glas - Tiefe BVS-Mundstücke für stille Weine

Diese Europäische Norm legt die Maße für eine Reihe von tiefen Schraubmundstücken für das Verschließen von Weinen mit einem CO2-Gehalt unterhalb 1,2 g/l fest.
ANMERKUNG   Karbonisierung ≥ 1,2 g/l CO2 erfordert einen geeigneten Behälter und Verschluss, welche zwischen Glashersteller, Verschlusshersteller und Verpacker/Abfüller vereinbart werden sollten.

Emballage - Emballages en verre - Bagues BVS hautes pour vins tranquilles

La présente Norme européenne spécifie les dimensions d'une série de bagues à vis hautes pour le bouchage des vins dont la teneur en CO2 est inférieure à 1,2 gramme par litre.
NOTE   La carbonatation >+/- 1,2g/l en CO2 nécessite une bouteille appropriée et un moyen de bouchage convenus entre le verrier, le fabricant de système de bouchage et le fabricant d’emballage/remplissage du produit.

Embalaža - Steklena embalaža - Globoka grla BVS za nepeneča vina

Ta evropski standard določa mere več globokih grl z navojem za zapiranje vin z vsebnostjo CO2 pod 1,2 grama na liter.

General Information

• Status: Withdrawn
• Publication Date: 05-Mar-2013
• Withdrawal Date: 23-Jun-2020
• ICS: 55.100 - Bottles. Pots. Jars
• Technical Committee: CEN/TC 261 - Packaging
• Drafting Committee: CEN/TC 261/SC 5/WG 21 - Glass packaging
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 24-Jun-2020
• Ref Project: SIST EN 16293:2013 - Packaging - Glass Packaging - Deep BVS finishes for still wines

Relations

• Replaced By: EN 16293:2020 - Packaging - Glass Packaging - Deep BVS finishes for still wines
• Effective Date: 19-Jul-2017

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Verpackung - Verpackungen aus Glas - Tiefe BVS-Mundstücke für stille WeineEmballage - Emballages en verre - Bagues BVS hautes pour vins tranquillesPackaging - Glass Packaging - Deep BVS finishes for still wines67.160.10Alcoholic beverages55.100Steklenice. Lonci. KozarciBottles. Pots. JarsICS:Ta slovenski standard je istoveten z:EN 16293:2013SIST EN 16293:2013en,fr,de01-julij-2011SIST EN 16293:2013SLOVENSKI
STANDARD



SIST EN 16293:2013



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 16293
March 2013 ICS 55.100 English Version
Packaging - Glass Packaging - Deep BVS finishes for still wines Emballage - Emballages en verre - Bagues BVS hautes pour vins tranquilles
Verpackung - Verpackungen aus Glas - Tiefe BVS-Mundstücke für stille Weine This European Standard was approved by CEN on 12 January 2013.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 16293:2013: ESIST EN 16293:2013



EN 16293:2013 (E) 2 Contents Page Foreword . 3 Introduction . 4 1 Scope . 5 2 Terms and definitions . 5 3 Requirements . 5 4 Constructions and dimensions of deep BVS finishes . 5 5 Thread profile construction . 10 6 Construction for the bore entrance profile . 11 7 Construction of transfer bead . 12 8 Construction of the neck . 12 9 BVS finishes — Dimensions Y and X . 13 10 Control of bottle and neck verticality . 16 Bibliography. 17
SIST EN 16293:2013



EN 16293:2013 (E) 3 Foreword This document (EN 16293:2013) has been prepared by Technical Committee CEN/TC 261 “Packaging”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2013, and conflicting national standards shall be withdrawn at the latest by September 2013. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organisations of the following countries are bo
...