CEN/TC 261/SC 5/WG 21 - Glass packaging

This document gives dimensions and specifications of the glass finishes for bottles intended for sparkling wine produced by the "traditional method", with a diameter of 26 mm, 29 mm or 36 mm.
NOTE 1   The finish is to receive a crown cap and a cork stopper.
NOTE 2   The dimensions of the 26 mm and 29 mm finish come from the French standard NF H 35-029.

This document specifies the dimensions of the various 28 mm screw finishes for glass containers designated MCA.

This document specifies dimensions of neck finishes for aerosol and spray glass containers, in order to guarantee tight sealing of valves or pumps with ferrules defined by EN 14849.
It applies to glass containers with a nominal diameter of the neck finish around 11 mm, 13 mm, 15 mm, 17 mm, 18 mm and 20 mm for both moulded and tubular glass neck finishes.
NOTE   These neck finishes are commonly called FEA 11, 13, 15, 17, 18 and 20.

This document specifies dimensions of a series of deep screw finishes for the closure of wines with a CO2 content below 1,2 g per litre.
NOTE   Carbonation ≥ 1,2 g/l CO2 requires a suitable container and closure agreed between the glass maker, closure maker and packer/filler.

This document specifies the dimensions of the 26 mm-shallow crown finish for glass bottles containing beverages. The shallow crown finish is designed to use a metal crown cap (see Reference [2]).

This document specifies the dimensions of the 26 mm tall crown finish for glass bottles containing beverages. The tall crown finish is designed to use a metal crown cap (see e.g. EN 17177).

This document specifies the dimensional requirements for the 26 mm diameter, 6 mm height crown cap, lined with a plastic gasket and designed to seal bottles with neck finishes foreseen for pry-off or twist-crown applications.
It specifies the dimensional requirements that are of direct importance to the customer/bottler and recommendations for cap application.
The gasket material and profile are not specified as a number of different profiles are available depending on the end use and supplier specific technology. The requirement placed on the gasket profile design is that it needs to be fit for purpose used in conjunction with glass finishes in reference.

This European Standard specifies the dimensions of a cork mouth finish for corks and capsules for glass bottles, for wine that has a carbonation pressure not exceeding 1,2 g CO2/l, for use with natural corks.

ISO 12818:2013 specifies the tolerances for the bottles intended to be used for pharmaceutical products, cosmetic and perfumery products and chemical products. The tolerances concerned are brimful capacity, height, diameter and width, and verticality.

This European Standard specifies the profiles of thread for all the screw deck finishes for metallic, plastic and metallo-plastic closures.
The depressed threads could be used on continuous thread finishes to reduce the thread depth at and adjacent to the mould parting line.
Depressed threads are only used on > 28 mm Roll-On Pilferproof (ROPP) type finishes where the closure is formed on the neck finish.

TC - Modification to Table 4 in E reference version and in F and D translations.

This European Standard specifies the dimensions of a range of screw thread finishes for the closure of bottles for beverages and other non-carbonated products, including the major sizes in use of standard and long skirt pilfer proof finishes.

This European Standard gives general requirements for the design of all types of cork removal devices.

ISO 9100-3:2005 specifies the dimensions of a vacuum lug finish with a nominal size of 38 mm regular for wide-mouth glass containers.

ISO 9100-2:2005 specifies the dimensions of a vacuum lug finish with a nominal size of 33 mm medium for wide-mouth glass containers.

ISO 9100-4:2005 specifies the dimensions of a vacuum lug finish with a nominal size of 38 mm medium for wide-mouth glass containers.

This European Standard specifies requirements for crown bottle openers designed for 26 mm crown closures, to suit the glass bottle finishes specified in EN 14634 and EN 14635. It applies to hand-held openers of the aperture type.

ISO 9100-6:2005 specifies the dimensions of vacuum lug finishes with nominal sizes of 53 mm and 58 mm regular for wide-mouth glass containers.

ISO 9100-9:2005 specifies the dimensions of vacuum lug finishes with nominal sizes of 63, 66 and 70 mm deep for wide-mouth glass containers.

ISO 9100-13:2005 specifies the dimensions of a vacuum lug finish with a nominal size of 100 mm regular for wide-mouth glass containers.

ISO 9100-10:2005 specifies the dimensions of a vacuum lug finish with a nominal size of 77 mm regular for wide-mouth glass containers.

ISO 9100-5:2005 specifies the dimensions of vacuum lug finishes with a nominal size of 43 mm and 48 mm regular for wide-mouth glass containers.

ISO 9100-12:2005 specifies the dimensions of a vacuum lug finish with a nominal size of 89 mm regular for wide-mouth glass containers.

ISO 9100-11:2005 specifies the dimensions of a vacuum lug finish with a nominal size of 82 mm regular for wide-mouth glass containers.

ISO 9100-8:2005 specifies the dimensions of vacuum lug finishes with nominal sizes of 63, 66 and 70 mm regular for wide-mouth glass containers.

ISO 9100-7:2005 specifies the dimensions of vacuum lug finishes with a nominal size of 58 mm deep for wide-mouth glass containers.

ISO 9100-14:2005 specifies the dimensions of a vacuum lug finish with a nominal size of 110 mm regular for wide-mouth glass containers.

ISO 9100-1:2005 specifies the types of vacuum lug finishes for glass containers for ISO 9100-2 to ISO 9100-14.

ISO 8106:2004 specifies a gravimetric method for determining the capacity of glass containers and their compliance with specification limits.

ISO 8113:2004 specifies a method for determination of the resistance of glass containers to external force in the direction of the vertical axis.

ISO 7459:2004 specifies test methods for determining the thermal shock resistance and thermal shock endurance of glass containers.
It does not apply to the determination of properties of laboratory glassware.

ISO 7458:2004 specifies two test methods for the determination of the internal pressure resistance of glass containers, Method A by application of uniform internal pressure for a predetermined period and Method B by application of internal pressure increasing at a predetermined constant rate.

This document specifies the dimensions of a range of screw thread finishes known as “BVP” for the closure of bottles for beverages and other non-carbonated products, including the major sizes in use of standard and long skirt pilfer proof finishes.
NOTE   This finish is not suitable for liquids that are stored horizontally.

This document specifies the dimensions of the 28 millimetres screw finish for glass containers designated MCA 1.

This document specifies the dimensions of the 28 mm finish for glass containers designated MCA 3 for pressurized or vacuum liquids.

This document specifies the dimensions of the 18 millimetres screw finish for glass containers designated MCA 7.5 R finish.

TC origin - mistake in Figure not corresponding with text

This European Standard specifies the dimensions of the 28 mm screw finish for glass containers designated MCA 3 for pressurized or vacuum liquids for one way glass.

This European Standard specifies the dimensions of the 28 mm screw finish for glass containers designated MCA 7,5 R finish for one way glass.

This European Standard specifies the dimensions of the 28 mm screw finish for glass containers designated MCA 3 for pressurized or vacuum liquids for returnable glass.

This European Standard specifies the dimensions of the 28 mm screw finish for glass containers designated MCA 7,5 R finish for returnable glass.

This European Standard specifies the dimensions of the 28 mm finish for glass containers for pressurised or vacuum liquids designated MCA 7,5 RF.

This European Standard specifies the dimensions of the screw finish for glass containers designated MCA 2 for one way glass.

This European Standard specifies the dimensions of the screw finish for glass containers designated MCA 2 for returnable glass.

This European Standard specifies dimensions of a series of deep screw finishes for the closure of wines with a CO2 content below 1,2 grams per litre.
NOTE   Carbonation >1,2 g/l CO2 requires a suitable container and closure agreed between the glass maker, closure maker and packer/filler.

This document specifies the dimensions of the 26 mm shallow crown finish for glass bottles containing beverages. The shallow crown finish is designed to use a metal crown closure (see CE.T.I.E. data sheet EC1-02 revision 1 [2]).

ISO 12821:2013 specifies the dimensions of the 26-mm-tall crown finish for glass bottles containing beverages. The tall crown finish is designed to use a metal crown closure.