prEN 3155-016
(Main)Aerospace series - Electrical contacts used in elements of connection - Part 016: Contacts, electrical, male, type A, crimp, class S - Product standard
Aerospace series - Electrical contacts used in elements of connection - Part 016: Contacts, electrical, male, type A, crimp, class S - Product standard
This document specifies the required characteristics, tests and tooling applicable to male electrical contacts, type A, crimp, class S, used in elements of connection according to EN 3155 002.
It is used together with EN 3155 001.
The tests as applied in this standard do not permit the full qualification and shall be completed with associated components.
Luft- und Raumfahrt - Elektrische Kontakte zur Verwendung in Verbindungselementen - Teil 016: Elektrische Stiftkontakte, Typ A, crimpbar, Klasse S - Produktnorm
Série aérospatiale - Contacts électriques utilisés dans les organes de connexion - Partie 016 : Contacts électriques, mâles, type A, à sertir, classe S - Norme de produit
Le présent document spécifie les caractéristiques requises, les essais et l’outillage applicables aux contacts électriques mâles, de type A, à sertir, de classe S, utilisés dans les organes de connexion suivant l’EN 3155-002.
Il est utilisé conjointement avec l’EN 3155-001.
Les essais tels qu’ils sont appliqués dans la présente norme ne permettent pas la qualification complète et doivent être complétés avec des composants associés.
Aeronavtika - Električni kontakti za uporabo v veznih elementih - 016. del: Kontakti, električni, moški, tip A, stisljivi, razred S - Standard za proizvod
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-maj-2024
Aeronavtika - Električni kontakti za uporabo v veznih elementih - 016. del:
Kontakti, električni, moški, tip A, stisljivi, razred S - Standard za proizvod
Aerospace series - Electrical contacts used in elements of connection - Part 016:
Contacts, electrical, male, type A, crimp, class S - Product standard
Luft- und Raumfahrt - Elektrische Kontakte zur Verwendung in Verbindungselementen -
Teil 016: Elektrische Stiftkontakte, Typ A, crimpbar, Klasse S - Produktnorm
Série aérospatiale - Contacts électriques utilisés dans les organes de connexion - Partie
016 : Contacts électriques, mâles, type A, à sertir, classe S - Norme de produit
Ta slovenski standard je istoveten z: prEN 3155-016
ICS:
49.060 Letalska in vesoljska Aerospace electric
električna oprema in sistemi equipment and systems
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
DRAFT
EUROPEAN STANDARD
NORME EUROPÉENNE
EUROPÄISCHE NORM
February 2024
ICS 49.060 Will supersede EN 3155-016:2019
English Version
Aerospace series - Electrical contacts used in elements of
connection - Part 016: Contacts, electrical, male, type A,
crimp, class S - Product standard
Série aérospatiale - Contacts électriques utilisés dans Luft- und Raumfahrt - Elektrische Kontakte zur
les organes de connexion - Partie 016 : Contacts Verwendung in Verbindungselementen - Teil 016:
électriques, mâles, type A, à sertir, classe S - Norme de Elektrische Stiftkontakte, Typ A, crimpbar, Klasse S -
produit Produktnorm
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee ASD-
STAN.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 3155-016:2024 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Required characteristics . 5
4.1 Specific characteristics . 5
4.2 Dimensions, mass . 5
4.3 Marking . 7
4.4 Material, surface treatment. 7
4.5 Permissible cables . 8
4.6 Tooling . 9
4.6.1 Crimping tools . 9
4.6.2 Insertion/Extraction tools . 9
4.7 Cable stripping . 10
4.8 Tests . 10
4.9 Gauges . 13
5 Designation . 13
6 Marking . 13
7 Technical specification . 13
Bibliography . 14
European foreword
This document (prEN 3155-016:2024) has been prepared by the Aerospace and Defence Industries
Association of Europe - Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this Standard has
received the approval of the National Associations and the Official Services of the member countries of
ASD, prior to its presentation to CEN.
This document is currently submitted to the CEN Enquiry.
This document will supersede EN 3155-016:2019.
EN 3155-016:2019:
— Figure 1 and Figure 2: footnote for diameters E and G added;
— Table 1: values for dimension H updated;
— Table 6 “Tests”: remarks added for test EN 2591-406 and EN 2591-509.
Any feedback and questions on this document should be directed to the users’ national standards body.
A complete listing of these bodies can be found on the CEN website.
1 Scope
This document specifies the required characteristics, tests and tooling applicable to male electrical
contacts, type A, crimp, class S, used in elements of connection according to EN 3155-002.
It is used together with EN 3155-001.
The tests as applied in this standard do not permit the full qualification and shall be completed with
associated components.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
EN 2083, Aerospace series — Copper and copper alloys conductors for electrical cables — Product standard
EN 2591 (all parts), Aerospace series — Elements of electrical and optical connection — Test methods
EN 3155-001, Aerospace series — Electrical contacts used in elements of connection — Part 001: Technical
Specification
EN 3708-001, Aerospace series — Modular interconnection systems — Terminal junction systems — Part
001: Technical specification
EN 4008-007, Aerospace series — Elements of electrical and optical connection — Crimping tools and
associated accessories — Part 007: Positioner for crimping tool M22520/2-01 — Product standard
EN 400
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.