prEN 1096-4

Glass in building - Coated glass - Part 4: Evaluation of conformity / Product standard

This document covers the evaluation of conformity and the factory production control of coated glass for use in buildings.
NOTE   For glass products with electrical wiring or connections for, e.g. alarm or heating purposes, other directives, e.g. Low Voltage Directive, may apply.

Glas im Bauwesen - Beschichtetes Glas - Teil 4: Konformitätsbewertung / Produktnorm

Dieses Dokument umfasst die Konformitätsbewertung und die werkseigene Produktionskontrolle von beschichtetem Glas zur Anwendung im Bauwesen.
ANMERKUNG   Für Glaserzeugnisse mit elektrischer Verkabelung oder Anschlüssen, wie z. B. Alarm- oder Heizungsanwendungen, können andere Richtlinien, z. B. die Niedrigspannungsrichtlinie, gelten.

Verre dans la construction - Verre à couche - Partie 4: Évaluation de la conformité / Norme de produit

Le présent document traite de l’évaluation de la conformité et du contrôle de la production en usine du verre à couche employé dans la construction.
NOTE   Pour les produits verriers équipés d’un câblage ou de branchements électriques, pour les besoins d’alarme ou de chauffage par exemple, d’autres directives comme la Directive sur les courants faibles peuvent s’appliquer.

Steklo v gradbeništvu - Steklo z nanosi - 4. del: Vrednotenje skladnosti/standard za izdelek

General Information

• Status: Not Published
• Publication Date: 10-Nov-2013
• ICS: 81.040.20 - Glass in building
• Technical Committee: CEN/TC 129 - Glass in building
• Drafting Committee: CEN/TC 129 - Glass in building
• Current Stage: 4098 - Decision to abandon - Enquiry
• Completion Date: 16-Dec-2014
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Mandate: M/135 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on flat glass, profiled glass and glass block products
• Ref Project: oSIST prEN 1096-4:2012 - Glass in building - Coated glass - Part 4: Evaluation of conformity / Product standard

Relations

• Revises: EN 1096-4:2004 - Glass in building - Coated glass - Part 4: Evaluation of conformity/Product standard
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
01-marec-2012
Steklo v gradbeništvu – Steklo z nanosi – 4. del: Ovrednotenje skladnosti/standard
za izdelek
Glass in building - Coated glass - Part 4: Evaluation of conformity / Product standard
Glas im Bauwesen - Beschichtetes Glas - Teil 4: Konformitätsbewertung / Produktnorm
Verre dans la construction - Verre à couche - Partie 4: Évaluation de la conformité /
Norme de produit
Ta slovenski standard je istoveten z: prEN 1096-4
ICS:
81.040.20 Steklo v gradbeništvu Glass in building
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
DRAFT
NORME EUROPÉENNE
EUROPÄISCHE NORM
January 2012
ICS 81.040.20 Will supersede EN 1096-4:2004
English Version
Glass in building - Coated glass - Part 4: Evaluation of
conformity / Product standard
Verre dans la construction - Verre à couche - Partie 4: Glas im Bauwesen - Beschichtetes Glas - Teil 4:
Évaluation de la conformité / Norme de produit Konformitätsbewertung / Produktnorm
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 129.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2012 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 1096-4:2012: E
worldwide for CEN national Members.

Contents Page
Foreword . 4
1 Scope. 5
2 Normative references . 5
3 Terms, definitions and symbols . 6
3.1 Terms and definitions . 6
3.2 Symbols . 7
4 Requirements . 7
4.1 Product description . 7
4.2 Conformity with the definition of coated glass . 8
4.3 Determination of the characteristic’s performances . 8
4.3.1 Characteristic of coated glass . 8
4.3.2 Determination of characteristics of coated glass . 11
4.4 Durability . 13
4.5 Dangerous substances. 13
5 Evaluation of conformity . 13
5.1 General . 13
5.2 Initial type testing of the product (see 5.1, 2) . 14
5.2.1 General . 14
5.2.2 Initial type testing of coated glass . 15
5.2.3 Initial type testing of characteristic’s performances . 16
5.3 Factory production control and inspection of samples in accordance with a
prescribed test plan (see 5.1, 1a and b) . 16
5.4 Initial inspection of factory and of factory production control (see 5.1, 1c) . 17
5.5 Continuous surveillance and assessment of the factory production control (see
5.1, 1c) . 18
6 Marking and/or labelling . 18
6.1 General . 18
6.2 Product marking . 18
6.3 Product characteristics . 19
6.4 “Characteristics/performance identification paper” . 19
7 Initial type testing; sampling and measurement of photometric and energy
characteristics . 19
7.1 Sampling . 19
7.1.1 General . 19
7.1.2 Sample specification . 19
7.2 Measurement of photometric and energy characteristics . 20
Annex A (normative) Factory production control . 21
A.1 Factory Production Control Requirements . 21
A.1.1 General . 21
A.1.2 Organisation . 21
A.1.3 Control system . 21
A.2 Marking . 22
A.3 Inspection and testing tables of coated glass product production . 22
A.3.1 Information on Tables A.1 and A.2 . 22
A.3.2 Comments specific to Table A.1 . 23
A.3.3 Comments specific to Table A.2 . 24
A.3.4 Use of proxy testing . 24
Annex B (informative) Tests for factory production control . 29
B.1 General . 29
B.2 Radiometric properties . 29
B.2.1 Sampling . 29
B.2.2 Measurements . 30
B.3 Information on ensuring durability conformity . 30
Annex C (informative) Provisions for voluntary involvement of third party(ies) . 31
C.1 General . 31
C.2 Voluntary tasks for third parties . 31
C.3 Marking and labelling . 31
Annex ZA (informative) Clauses of this European Standard addressing the provisions of
EU Construction Products Directive . 32
ZA.1 Scope and relevant characteristics . 32
ZA.2 Procedure(s) for the attestation of conformity of coated glass products . 34
ZA.2.1 System(s) of attestation of conformity . 34
ZA.2.2 EC Certificate and Declaration of conformity . 36
ZA.3 CE marking and labelling . 38
Bibliography . 41

Foreword
This document (prEN 1096-4:2011) has been prepared by Technical Committee CEN/TC TC 129
“Glass in building”, the secretariat of which is held by NBN.
This document is currently submitted to the CEN Enquiry.
This document has been prepared under a mandate given to CEN by the European Commission and
the European Free Trade Association, and supports essential requirements of EU Directive(s).
For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this
document.
This document supersedes EN 1096-4:2004.
The main changes compared to the previous edition are:
a) The tolerance on emissivity is reduced to +0,01 for coatings with a declared normal emissivity
lower than 0,10;
b) The solar factor, g, is listed within the spectrophotometric characteristics to be declared.
This part of the document does not stand alone; it is a part of one document:
 EN 1096-1, Glass in building – Coated glass - Part 1: Definitions and classification
 EN 1096-2, Glass in building - Coated glass - Part 2: Requirements and test methods for class A,
B and S coatings
 EN 1096-3, Glass in building - Coated glass - Part 3: Requirements and test methods for class C
and D coatings
 EN 1096-4, Glass in building - Coated glass - Part 4: Evaluation of conformity/Product standard
 EN 1096-5, Glass in building – coated glass – Part 5: Test method and classification for the self-
cleaning performances of coated glass surfaces
This document contains other aspects of importance of trade.
1 Scope
This document covers the evaluation of conformity and the factory production control of coated glass
for use in buildings.
NOTE For glass products with electrical wiring or connections for, e.g. alarm or heating purposes, other
directives, e.g. Low Voltage Directive, may apply.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applie
...