iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 1307:2014+A1:2016/prA3

(Amendment)

Textile floor coverings - Classification

Textile floor coverings - Classification

This European Standard specifies the requirements for classification of all textile floor coverings and carpet tiles, excluding rugs and runners (see ISO 2424) into use classes with regard to one or more of the following properties: wear, appearance retention, additional performance properties and classes for luxury rating.
This European Standard refers to the classification as defined in EN ISO 10874.

Textile Bodenbeläge - Einstufung

Diese Europäische Norm legt die Anforderungen an die Einstufung aller textilen Bodenbeläge und Teppichfliesen, ausgenommen abgepasste Teppiche und Läufer, (siehe ISO 2424) in Gebrauchsklassen bezüglich mindestens einer der folgenden Eigenschaften fest: Verschleiß, Aussehenserhalt, zusätzliche Gebrauchseigenschaften und Komfort Klassen.
Diese Europäische Norm bezieht sich auf die in EN ISO 10874 definierte Einstufung.

Revêtements de sol textile - Classement d'usage

La présente Norme européenne spécifie les exigences relatives au classement de l'ensemble des revêtements de sol textiles et des dalles de moquette, à l'exclusion des tapis et des passages (voir ISO 2424), en fonction d'un classement d'usage selon une ou plusieurs des propriétés suivantes : usure, conservation d'aspect, autres caractéristiques de performance et classes de confort.
La présente Norme européenne se réfère à la classification définie dans l'EN ISO 10874.

Tekstilne talne obloge - Razvrščanje

General Information

Status
Not Published
ICS
97.150 - Floor coverings
Technical Committee
CEN/TC 134 - Resilient and textile floor coverings
Drafting Committee
CEN/TC 134/WG 8 - Textile floor coverings
Current Stage
4060 - Closure of enquiry - Enquiry
Start Date
14-Jun-2018
Due Date
09-Oct-2018
Completion Date
14-Jun-2018
Directive
305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
Ref Project
SIST EN 1307:2014+A1:2016/oprA3:2018 - Textile floor coverings - Classification

Relations

Merged Into
EN 1307:2014+A3:2018 - Textile floor coverings - Classification
Effective Date
19-Jan-2023
Amends
EN 1307:2014+A2:2018 - Textile floor coverings - Classification
Effective Date
11-Apr-2018
Amends
EN 1307:2014+A1:2016 - Textile floor coverings - Classification
Effective Date
13-Sep-2017

Buy Standard

EN 1307:2014+A1:2016/oprA3:2018EN 1307:2014+A1:2016/oprA3:2018
PreviousNext
Draft
EN 1307:2014+A1:2016/oprA3:2018
English language
4 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 1307:2014+A1:2016/oprA3:2018
01-april-2018
7HNVWLOQHWDOQHREORJH5D]YUãþDQMH
Textile floor coverings - Classification
Textile Bodenbeläge - Einstufung
Revêtements de sol textile - Classement d'usage
Ta slovenski standard je istoveten z: EN 1307:2014+A1:2016/prA3
ICS:
97.150 Talne obloge Floor coverings
SIST EN 1307:2014+A1:2016/oprA3:2018 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 1307:2014+A1:2016/oprA3:2018

---------------------- Page: 2 ----------------------

SIST EN 1307:2014+A1:2016/oprA3:2018


DRAFT
EUROPEAN STANDARD
EN 1307:2014+A1:2016
NORME EUROPÉENNE

EUROPÄISCHE NORM
prA3
March 2018
ICS 97.150
English Version

Textile floor coverings - Classification
Revêtements de sol textile - Classement d'usage Textile Bodenbeläge - Einstufung
This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 134.

This draft amendment A3, if approved, will modify the European Standard EN 1307:2014+A1:2016. If this draft becomes an
amendment, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for
inclusion of this amendment into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 13329:2023(Main)
Laminate floor coverings - Specifications, requirements and test methods
SIST EN 13329:2024

This document specifies characteristics, requirements and test methods for laminate floor coverings with a surface layer as defined in 3.2 to 3.5. It also specifies requirements for marking and packaging.
It includes a classification system, based on EN ISO 10874, giving practical requirements for areas of use and levels of use, to indicate where laminate floor coverings will give satisfactory service and to encourage the consumer to make an informed choice.
Laminate floor coverings are generally designed for floating installations and are considered for domestic and commercial levels of use, including domestic kitchens. This document does not specify requirements relating to the use in areas which are subjected to frequent wetting, such as bathrooms, laundry rooms or saunas. In general, laminate floor coverings can only be used in those areas when authorized by the manufacturer and under conditions described in the manufacturer's installation guidelines.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17861:2023(Main)
Resilient, textile, laminate and modular mechanical locked floor coverings - Circular Economy - Terms and definitions
SIST EN 17861:2023

This document defines terms regarding circular economy that are used by the flooring sector.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16511:2023(Main)
Modular mechanical locked floor coverings (MMF) - Specification, requirements and test method for multilayer modular panels for floating installation
SIST EN 16511:2023

This document specifies the characteristics of multilayer mechanical locked floor covering with a wear-resistant and decorative surface layer supplied in panels (either tile or plank form). The floor panels are considered suitable for domestic and commercial levels of use and designed for floating installation.
This document does not apply to resilient floor panels for loose-laying according to EN ISO 20326, to multilayer wood floorings according to EN 13489, to wood veneer floor coverings according to EN 14354, to laminate floor covering according to EN 13329, EN 14978 and EN 15468 nor to products specified in EN ISO 10581, EN ISO 10582, EN ISO 24011, EN 12104 and ISO 14486.
This document is applicable to areas which are subject to frequent wetting, e.g. bathrooms, laundry rooms or saunas, only if specified by the producer.
This document also includes requirements for marking and packaging.
In Annex A (informative), optional properties are given. In Annex B (informative), a test method for the classification of the flexibility is given.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12104:2023(Main)
Resilient floor coverings - Cork floor tiles - Specification
SIST EN 12104:2023

This document specifies the requirements for cork floor coverings made from agglomerated composition cork, with or without a decorative surface layer, with or without applied colours, supplied in tile form which are designed to be used with a factory finish and/or an in situ finish.
The cork floor decorative surface layer can be made of cork or other bio-based decorative materials, e.g. wood or bamboo veneers, linoleum, leather or natural fibres.
This document includes a classification system based on intensity of use which shows where cork floor tiles with a factory finish can give satisfactory service (see EN ISO 10874). It also specifies requirements for marking, labelling and packing.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 26986:2012/A1:2022(Amendment)
Resilient floor coverings - Expanded (cushioned) poly(vinyl chloride) floor covering - Specification - Amendment 1 (ISO 26986:2010/Amd 1:2022)
SIST EN ISO 26986:2012/A1:2022

ISO 26986:2010 specifies the characteristics of floor coverings based on expanded (cushioned) poly(vinyl chloride), supplied as either tiles or rolls.
ISO 26986:2010 includes a classification system based on the intensity of use, which shows where resilient floor coverings give satisfactory service.

  • Amendment
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 11638:2022(Main)
Resilient floor coverings - Heterogeneous poly(vinyl chloride) flooring on foam - Specification (ISO 11638:2020, including corrected version 2021-09)
SIST EN ISO 11638:2022

This document specifies the characteristics of heterogeneous poly(vinyl chloride) flooring on foam, based on poly(vinyl chloride), and supplied in roll form or tile and plank. Such products can contain a transparent, non PVC factory finish.
To encourage the consumer to make an informed choice, this document includes a classification system, based on intensity of use, which shows where these floor coverings can be expected to give satisfactory service.
It also specifies requirements for marking.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TR 17849:2022(Main)
Resilient, textile, laminate and modular mechanical locked floor coverings - Guidance on how to implement EN 14041:2004/AC:2006 under the Construction Products Regulation EU 305/2011 (CPR)
SIST-TP CEN/TR 17849:2022

This document concerns floor covering products falling under the scope of EN 14041 as well as mandate M/119 and M/119 rev.1. Such products are considered construction products for indoor use.
Excluded are products which are loose laid (barrier)mats, runners and rugs, as well as products which might be covered by other harmonized standards, such as indoor sports flooring, or other legislation such as flooring in public transport.
The purpose of this document is to provide guidance on how to deal with the situation that:
a) the version EN 14041:2004/AC:2006 has to be used for placing CEN TC134 products onto the European market, even though it:
1) was developed under the no longer applicable “Council Directive 89/106/EEC on the approximation of laws, regulations and administrative provisions of the Member States relating to construction products (CPD)”;
and
2) has been withdrawn and replaced by EN 14041:2018 in the current CEN catalogue;
and
b) the more recent version EN 14041:2018 cannot be used for placing CEN TC134 products onto the European market, even though it:
1) was developed under the currently applicable legislation, “Regulation (EU) No 305/2011 laying down harmonised conditions for the marketing of construction products (CPR)”;
2) is the active version of the standard in the current CEN catalogue.
The focus will be on an overview of the resources available from the European commission for CE marking and placing products onto the European market as well as how to implement EN 14041:2004/AC:2006 under the current European legislation pointing out sections which are no longer valid.

  • Technical report
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 23999:2021(Main)
Resilient floor coverings - Determination of dimensional stability and curling after exposure to heat (ISO 23999:2021)
SIST EN ISO 23999:2022

This document specifies a method for determining dimensional stability and curling of resilient floor coverings, in the form of sheets, tiles or planks after exposure to heat.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    20 pages
    German language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17539:2021(Main)
Modular mechanical locked floor coverings (MMF) - Determination of geometrical characteristics
SIST EN 17539:2021

This document specifies test methods for the determination of geometrical characteristics of modular mechanical locked floor covering panels in respect of thickness, length, width, squareness, straightness, width flatness, length flatness, openings between assembled elements and height differences between assembled elements.
The geometrical characteristics of modular mechanical locked panels are important considerations because installed flooring will have an objectionable appearance if these performance criteria are not followed. This can cause the installed panels to line up unevenly, producing unsightly seams, uneven surfaces and corners that do not match.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16094:2021(Main)
Laminate floor coverings - Test method for the determination of micro-scratch resistance
SIST EN 16094:2021

This document specifies a test method for the micro-scratch resistance with two procedures (A and B) and a test method for polishing resistance (procedure C) which can be used for all types of laminate floor coverings. The resistance to polishing is related to mat surfaces.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day