EN 13141-11:2015

Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 11: Supply ventilation units

This European standard specifies aerodynamic, acoustic and electrical power performance test measurements for un-ducted / ducted continuous supply ventilation / supply air ventilation units in a single room or a single dwelling used in residential ventilation.
In general such units contain:
- fan;
- air filter;
- control system.
Units may also include:
- grille or air distribution device;
- heating device;
- solar or thermal collectors (water or air);
- electrical;
- hydronic;
- sound attenuators;
- bypass dampers;
- mixing devices.
Supplementary heating may also be provided by solar air collector air or ground source heat pumps etc., the performance of these supplementary components are not covered by this standard.

Lüftung von Gebäuden - Leistungsprüfung von Bauteilen/Produkten für die Lüftung von Wohnungen - Teil 11: Zuluftsysteme

Diese Europäische Norm legt Prüfmessungen der aerodynamischen, akustischen und elektrischen Leistung für Zulufteinheiten mit kontinuierlicher Versorgung ohne Luftführung/mit Luftleitung fest, die zum Zwecke der Wohnungs¬lüftung in einem einzelnen Raum oder einer einzelnen Wohnung eingesetzt werden.
Im Allgemeinen umfassen derartige Einheiten Folgendes:
-   Ventilator;
-   Luftfilter;
-   Regelsystem.
Die Einheiten können auch Folgendes umfassen:
-   Luftgitter oder Luftverteilungseinrichtung;
-   Heizvorrichtung;
-   Solar- bzw. thermische Kollektoren (Wasser oder Luft);
-   elektrisch;
-   hydronisch;
-   Schalldämpfer;
-   Bypass-Drosselelemente;
-   Mischvorrichtungen.
Eine Zusatzheizfunktion kann auch durch Solar-Luft-Kollektoren oder Luft- bzw. Erdwärmepumpen usw. bereitgestellt werden; die Leistung dieser zusätzlichen Bauteile ist nicht durch diese Norm abgedeckt.

Ventilation des bâtiments - Essais de performance des composants/produits pour la ventilation des logements - Partie 11 : Unités de ventilation par insufflation

La présente Norme européenne spécifie les mesures d’essai de performance aérodynamiques, acoustiques et énergétiques pour la ventilation de soufflage continue/les caissons de ventilation d’air de soufflage non raccordés/centralisé dans une pièce ou un logement individuel utilisés en ventilation résidentielle.
En règle générale, ces caissons comprennent :
-   un ventilateur ;
-   un filtre à air ;
-   un système de commande.
Les caissons peuvent également comprendre :
-   une grille ou un dispositif de distribution d’air ;
-   un dispositif de chauffage ;
-   par capteurs solaires ou thermiques (eau ou air) ;
-   électrique ;
-   hydronique ;
-   des atténuateurs de bruit ;
-   des registres de dérivation ;
-   des dispositifs mélangeurs.
Le chauffage d’appoint peut également être assuré par un capteur solaire d’air ou des pompes à chaleur géothermiques, etc. La performance de ces composants supplémentaires n’est pas couverte par la présente norme.

Prezračevanje stavb - Preskušanje lastnosti stanovanjskih prezračevalnih komponent/izdelkov - 11. del: Prezračevalni sistemi z nadtlakom

Ta evropski standard opredeljuje meritve preskusa aerodinamične, akustične in električne zmogljivosti za necevne/cevne enote za stalno prezračevanje/dovajanje zraka v eni sobi ali eni stanovanjski enoti, ki se uporabljajo za stanovanja.
Taka enota običajno vsebuje:
– ventilator;
– zračni filter;
– krmilni sistem.
Enote lahko vsebujejo tudi:
– rešetke;
– naprave za ogrevanje;
– sončne ali toplotne kolektorje (voda ali zrak);
– električne elemente;
– vodne elemente;
– dušilnike zvoka;
– obvodne dušilnike;
– mešalne naprave.
Dodatno ogrevanje se lahko zagotovi s sončnimi zbiralniki ali toplotnimi črpalkami s talnim virom toplote itd. Lastnosti teh dodatnih komponent niso zajete v tem standardu.

General Information

• Status: Published
• Publication Date: 26-May-2015
• Withdrawal Date: 29-Nov-2015
• ICS: 91.140.30 - Ventilation and air-conditioning systems
• Technical Committee: CEN/TC 156 - Ventilation for buildings
• Drafting Committee: CEN/TC 156/WG 2 - Natural and mechanical powered residential ventilation
• Current Stage: 9060 - Closure of 2 Year Review Enquiry - Review Enquiry
• Start Date: 02-Dec-2020
• Completion Date: 02-Dec-2020
• Ref Project: SIST EN 13141-11:2015 - Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 11: Positive pressure ventilation systems

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.HYDOQLKLüftung von Gebäuden - Leistungsprüfung von Bauteilen/Produkten für die Lüftung von Wohnungen - Teil 11: Überdruck-ZuluftsystemeVentilation des bâtiments - Essais de performance des composants/produits pour la ventilation des logements - Partie 11: Systèmes de ventilation à pression positiveVentilation for buildings - Performance testing of components/products for residential ventilation - Part 11: Positive pressure ventilation systems91.140.30VLVWHPLVentilation and air-conditioningICS:Ta slovenski standard je istoveten z:EN 13141-11:2015SIST EN 13141-11:2015en,fr,de01-september-2015SIST EN 13141-11:2015SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 13141-11
May 2015 ICS 91.140.30 English Version
Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 11: Supply ventilation units
Ventilation des bâtiments - Essais de performance des composants/produits pour la ventilation des logements - Partie 11 : Unités de ventilation par insufflation
Lüftung von Gebäuden - Leistungsprüfung von Bauteilen/Produkten für die Lüftung von Wohnungen - Teil 11: Zuluftsysteme This European Standard was approved by CEN on 16 April 2015.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13141-11:2015 ESIST EN 13141-11:2015

Typical applications . 21 Annex B (informative)
Sound insulating box . 24 Annex C (informative)
Acoustic box . 25 Annex D (normative)
Pressure leakage test method . 26 Bibliography . 27
Figure 1 — Position of EN 13141-11 in the field of the mechanical building services SIST EN 13141-11:2015

— un-ducted continuous supply ventilation units in a single room; — ducted continuous supply ventilation units in a single room; — un-ducted supply air ventilation units in a single room; — ducted supply air ventilation units in a single room;
— centralised unit for whole dwelling; used in residential ventilation. In general such units contain the following elements: — fan; — air filter; — control system. 1.2 This European Standard does not cover the following: — grilles, air delivery or air supply devices when the unit is ducted; — sound attenuation; — any heating devices or pre-heaters. 1.3 Safety requirements are given in EN 60335-2-80:2003 and its A2:2009 [2]. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 306, eeat exchangers - Methods of measuring the parameters necessary for establishing the performance EN 12792:2003, Ventilation for buildings - pymbolsf terminology and graphical symbols EN 13141-4:2011, Ventilation for buildings - merformance testing of componentsiproducts for residential ventilation - mart 4: cans used in residential ventilation systems EN ISO 717-1, Acoustics - oating of sound insulation in buildings and of building elements - mart 1: Airborne sound insulation bfpl 717-1) EN ISO 3741, Acoustics - aetermination of sound power levels and sound energy levels of noise sources using sound pressure - mrecision methods for reverberation test rooms bfpl m741c EN ISO 3743-1, Acoustics - aetermination of sound power levels and sound energy levels of noise sources using sound pressure - bngineering methods for small movable sources in reverberant fields - mart 1: Comparison method for a hard-walled test room bfpl m74m-1) SIST EN 13141-11:2015
...