EN ISO 22052:2020
(Main)Dentistry - Central compressed air source equipment (ISO 22052:2020)
Dentistry - Central compressed air source equipment (ISO 22052:2020)
This document specifies requirements and test methods for central compressed air source equipment supplying dental air for dental units and various dental air consuming devices in the dental office.
It also specifies quality requirements and test methods for the dental air produced by the central compressed air source equipment, such as requirements for the purity level of dental air.
It also specifies requirements for information to be supplied by the manufacturer on the performance, installation, operation and maintenance of the central compressed air source equipment.
This document applies only to central compressed air source equipment located outside of the dental treatment room.
This document does not apply to central compressed air source equipment located in the dental treatment room and facility piping. This document does not include requirements for dental laboratory applications (e.g. CAD/CAM systems).
Zahnheilkunde - Zentrale Druckluftversorgungsanlage (ISO 22052:2020)
Dieses Dokument legt Anforderungen und Prüfverfahren für zentrale Druckluftversorgungsanlagen fest, die dentale Behandlungseinheiten und verschiedene, dentale Luft verbrauchende Geräte in der Zahnarztpraxis mit dentaler Luft versorgen.
Außerdem legt es Qualitätsanforderungen und Prüfverfahren für die dentale Luft, die von der zentralen Druckluftversorgungsanlage erzeugt wird, wie Anforderungen an den Reinheitsgrad der dentalen Luft, fest.
Außerdem werden Anforderungen an die Herstellerangaben über Leistung, Installation, Betrieb und Wartung der zentralen Druckluftversorgungsanlage festgelegt.
Dieses Dokument gilt nur für zentrale Druckluftversorgungsanlagen, die sich außerhalb des dentalen Behandlungsraums befinden.
Dieses Dokument gilt nicht für zentrale Druckluftversorgungsanlagen, die sich im dentalen Behandlungsraum befinden, sowie für die Rohrleitungssysteme der Anlagen. Dieses Dokument enthält keine Anforderungen an Anwendungen im zahntechnischen Labor (z. B. CAD /CAM Systeme).
Médecine bucco-dentaire - Centrale d'air comprimé (ISO 22052:2020)
Le présent document spécifie les exigences et les méthodes d'essai relatives à une centrale d'air comprimé fournissant de l'air dentaire aux units dentaires et à divers dispositifs consommant de l'air dentaire dans le cabinet dentaire.
Il spécifie également les exigences de qualité et les méthodes d'essai relatives à l'air dentaire produit par la centrale d'air comprimé, telles que les exigences relatives au niveau de pureté de l'air dentaire.
Il spécifie également les exigences relatives aux informations devant être fournies par le fabricant sur les performances, l'installation, le fonctionnement et la maintenance de la centrale d'air comprimé.
Le présent document s'applique uniquement à une centrale d'air comprimé installée à l'extérieur de la salle de traitement dentaire.
Le présent document ne s'applique pas aux centrales d'air comprimé installées dans la salle de traitement dentaire, ni aux canalisations de l'installation. Le présent document ne contient pas d'exigences relatives aux applications en laboratoire dentaire (par exemple systèmes CFAO).
Zobozdravstvo - Oprema za centralno pripravo stisnjenega zraka (ISO 22052:2020)
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 22052:2020
01-september-2020
Zobozdravstvo - Oprema za centralno pripravo stisnjenega zraka (ISO 22052:2020)
Dentistry - Central compressed air source equipment (ISO 22052:2020)
Zahnheilkunde - Zentrale Druckluftversorgungsanlage (ISO 22052:2020)
Médecine bucco-dentaire - Centrale d'air comprimé (ISO 22052:2020)
Ta slovenski standard je istoveten z: EN ISO 22052:2020
ICS:
11.060.20 Zobotehnična oprema Dental equipment
SIST EN ISO 22052:2020 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 22052:2020
---------------------- Page: 2 ----------------------
SIST EN ISO 22052:2020
EN ISO 22052
EUROPEAN STANDARD
NORME EUROPÉENNE
July 2020
EUROPÄISCHE NORM
ICS 11.060.20
English Version
Dentistry - Central compressed air source equipment (ISO
22052:2020)
Médecine bucco-dentaire - Centrale d'air comprimé Zahnheilkunde - Zentrale Druckluftversorgungsanlage
(ISO 22052:2020) (ISO 22052:2020)
This European Standard was approved by CEN on 23 May 2020.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 22052:2020 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 22052:2020
EN ISO 22052:2020 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 22052:2020
EN ISO 22052:2020 (E)
European foreword
This document (EN ISO 22052:2020) has been prepared by Technical Committee ISO/TC 106
"Dentistry" in collaboration with Technical Committee CEN/TC 55 “Dentistry” the secretariat of which
is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by January 2021, and conflicting national standards shall
be withdrawn at the latest by January 2021.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 22052:2020 has been approved by CEN as EN ISO 22052:2020 without any modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 22052:2020
---------------------- Page: 6 ----------------------
SIST EN ISO 22052:2020
INTERNATIONAL ISO
STANDARD 22052
First edition
2020-06
Dentistry — Central compressed air
source equipment
Médecine bucco-dentaire — Centrale d’air comprimé
Reference number
ISO 22052:2020(E)
©
ISO 2020
---------------------- Page: 7 ----------------------
SIST EN ISO 22052:2020
ISO 22052:2020(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2020
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic o
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.