EN ISO 787-2:1995
(Main)General methods of test for pigments and extenders - Part 2: Determination of matter volatile at 105 degrees C (ISO 787-2:1981)
General methods of test for pigments and extenders - Part 2: Determination of matter volatile at 105 degrees C (ISO 787-2:1981)
Specifies a method of test for determining the matter volatile at a temperature of 105 °C in a sample. The procedure is only applicable to materials that are stable at 105 °C. For materials that are unstable at this temperature, the test conditions should be agreed between the interested parties. - Replaces ISO/R 787/2:1968.
Allgemeine Prüfverfahren für Pigmente und Füllstoffe - Teil 2: Bestimmung der bei 105 °C flüchtigen Anteile (ISO 787-2:1981)
Dieser Teil von ISO 787 legt ein allgemeines Prüfverfahren zur Bestimmung des Massenanteils in % fest, der aus einer Pigment- oder Füllstoffprobe bei 105° C flüchtig ist. Dieses Verfahren ist anwendbar auf Pigmente und Füllstoffe, die bei 105° C beständig sind (siehe aber auch die Anmerkung zu 5.2).
Méthodes générales d'essai des pigments et matières de charge - Partie 2: Détermination des matières volatiles à 105 degrés C (ISO 787-2:1981)
La présente partie de l'ISO 787 spécifie une méthode générale d'essai pour la détermination du pourcentage en masse des matières volatiles à une température de 105 °C, dans un échantillon de pigment ou de matière de charge. Cette méthode est applicable aux pigments et matières de charge stables à 105 °C (mais voir aussi la note en 5.2).
NOTE -- Chaque fois que cette méthode générale est applicable pour un pigment ou une matière de charge donné(e), il devra simplement y être fait référence dans la Norme internationale relative à ce pigment ou cette matière de charge, et il devra être mentionné, dans une note, toutes les modifications de détail qui peuvent être nécessaires en raison des propriétés spéciales du produit considéré. Ce n'est que dans le cas où une telle méthode générale ne serait pas applicable à un produit particulier, qu'il deviendrait nécessaire de spécifier une méthode spéciale pour la détermination des matières volatiles.
Splošne metode preskušanja pigmentov in polnil - 2. del: Ugotavljanje snovi, hlapnih pri 105 °C (ISO 787-2:1981)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-december-1997
Splošne metode preskušanja pigmentov in polnil - 2. del: Ugotavljanje snovi,
hlapnih pri 105 °C (ISO 787-2:1981)
General methods of test for pigments and extenders - Part 2: Determination of matter
volatile at 105 degrees C (ISO 787-2:1981)
Allgemeine Prüfverfahren für Pigmente und Füllstoffe - Teil 2: Bestimmung der bei 105 °
C flüchtigen Anteile (ISO 787-2:1981)
Méthodes générales d'essai des pigments et matieres de charge - Partie 2:
Détermination des matieres volatiles a 105 degrés C (ISO 787-2:1981)
Ta slovenski standard je istoveten z: EN ISO 787-2:1995
ICS:
87.060.10 Pigmenti in polnila Pigments and extenders
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
International Standard 78712
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION.ME)I(L1YHAPOflHAR OPl-AHM3AL&lR fl0 CTAH~APTM3ALWWl.ORGANISATlON INTERNATIONALE DE 6lORMALISATION
General methods of test for Pigments and extenders -
Part 2 : Determination of matter volatile at 105 OC
M&hodes gkxkales d ’essai des Pigments et matikres de Charge -
Partie 2 : Determination des ma tieres vola tiles 2 105 O C
First edition - 1981-09-15
UDC 667.622 : 543.813
Ref. No. ISO787/2-1981 (E)
Descriptors : paints, Pigments, tests, colour.
Price based on 2 pages
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of
national Standards institutes (ISO member bedies). The work of developing Inter-
national Standards is carried out through ISO technical committees. Every member
body interested in a subject for which a technical committee has been set up has the
right to be represented on that committee. International organizations, governmental
and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the technical committees are circulated to
the member bodies for approval before their acceptance as International Standards by
the ISO Council.
International Standard ISO 787/2 was developed by Technical Committee ISO/TC 35,
Paints and varnishes, and was circulated to the member bodies in December 1979.
lt has been approved by the member bodies of the following countries :
Australia India Poland
Austria Ireland Romania
Brazil Israel
South Africa, Rep. of
Canada Italy Spain
China
Kenya Sweden
Egypt, Arab Rep. of Korea, Rep. of
Switzerland
France Netherlands United Kingdom
Germany, F. R. Norway USSR
No member body expressed disapproval of the document.
This International Standard cancels and replaces ISO Recommendation R 787/2-1968,
of which it constitutes a technical revision.
0 International Organkation for Standardkation, 1981
Printed in Switzerland
ii
The purpose of this International Standard is to establish a series of general test
methods for Pigments and extenders which are suitable for all or many of the individual
Pigments and extenders for which specifications might be required. In such cases, a
Cross-reference to the general method should be included in the International Standard
relating to that Pigment or extender, with a note of any detailed modifications which
might be needed in view of the special properties of the product in question.
Technical Committee ISO/TC 35, Paints and varnishes, decided that all the general
methods should be published as they become available, as Parts of a Single Interna-
tional Standard, in Order to emphasize the relationship of each to the whole series.
The Technical Committee also decided that, where two or more procedures were wide-
ly used for determining the same or a similar characteristic of a Pigment or extender,
there would be no objection to including more than one of them in the ISO series. In
such cases it will, however, be essential to state clearly in a specification which method
is to be used and, in the test report, which method has been used.
Parts of the series already published are as follows :
Part 1 : Comparison of colour of Pigments
Part 2 : Determination of matter volatile at 105 OC
Part 3 : Determination of matter soluble in water - Hot extraction method
Part 4 : Determination of acidity or alkalinity of the aqueous extract
: Determination of oil absorption value
Part 5
Part 6 : Determination of residue on sieve - Oil method
Part 7 : Determination of residue on sieve - Water method - Manual procedure
: Determination of matter soluble in water - Cold extraction method
Part 8
Part 9 : Determination of pH value of an aqueous Suspension
Part 10 : Determination of density - Pyknometer method
Part 11
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.