EN 3015:2001
(Main)Aerospace series - Shank nuts, self-locking, serrated, in heat resisting steel FE-PA2601 (A286), silver plated - Classification: 1 100 MPa (at ambient temperature) / 650 °C
Aerospace series - Shank nuts, self-locking, serrated, in heat resisting steel FE-PA2601 (A286), silver plated - Classification: 1 100 MPa (at ambient temperature) / 650 °C
This standard specifies the characteristics of self-locking serrated shank nuts in FE-PA2601, silver plated, for aerospace applications.
Classification: 1 100 MPa ) / 650 °C )
NOTE FE-PA2601 is the new designation for FE-PA92HT, see TR 3900
Luft- und Raumfahrt - Einnietmuttern, selbstsichernd, verzahnt, aus hochwarmfestem Stahl FE-PA2601 (A286), versilbert - Klasse: 1 100 MPa (bei Raumtemperatur) / 650 °C
Diese Norm legt die Eigenschaften von verzahnten selbstsichernden Einnietmuttern aus FE-PA2601, versilbert, zur Verwendung in der Luft- und Raumfahrt fest.
Klasse : 1 100 MPa ) / 650 °C )
ANMERKUNG FE-PA2601 ist die neue Bezeichnung für FE-PA92HT, siehe TR 3900
Série aérospatiale - Écrous à sertir, dentelés, à freinage interne, en acier résistant à chaud PA2601 (A286), argentés - Classification : 1 100 MPa (à température ambiante) / 650 °C
La présente norme spécifie les caractéristiques des écrous à sertir, dentelés, à freinage interne, en FE-PA2601, argentés, pour les applications aérospatiales.
Classification : 1 100 MPa ) / 650 °C )
NOTE FE-PA2601 est la nouvelle désignation pour FE-PA92HT, voir TR 3900.
Aerospace series - Shank nuts, self-locking, serrated, in heat resisting steel FE-PA2601 (A286), silver plated - Classification: 1 100 Mpa (at ambient temperature) / 650 oC
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-januar-2002
Aerospace series - Shank nuts, self-locking, serrated, in heat resisting steel FE-
PA2601 (A286), silver plated - Classification: 1 100 Mpa (at ambient temperature) /
650 oC
Aerospace series - Shank nuts, self-locking, serrated, in heat resisting steel FE-PA2601
(A286), silver plated - Classification: 1 100 MPa (at ambient temperature) / 650 °C
Luft- und Raumfahrt - Einnietmuttern, selbstsichernd, verzahnt, aus hochwarmfestem
Stahl FE-PA2601 (A286), versilbert - Klasse: 1 100 MPa (bei Raumtemperatur) / 650 °C
Série aérospatiale - Écrous a sertir, dentelés, a freinage interne, en acier résistant a
chaud PA2601 (A286), argentés - Classification : 1 100 MPa (a température ambiante) /
650 °C
Ta slovenski standard je istoveten z: EN 3015:2001
ICS:
49.030.30 Matice Nuts
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN 3015
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2001
ICS 49.030.30
English version
Aerospace series - Shank nuts, self-locking, serrated, in heat
resisting steel FE-PA2601 (A286), silver plated - Classification:
1100 MPa (at ambient temperature)/650°C
Série aérospatiale - Ecrous à sertir, dentelés, à freinage Luft- und Raumfahrt - Einnietmuttern, selbstsichernd,
interne, en acier résistant à chaud FE-PA2601 (A286), verzahnt, aus hochwarmfestem Stahl FE-PA2601 (A286),
argentés - Classification: 1100 MPa (à température versilbert - Klasse: 1100 MPa (bei Raumtemperatur)/650°C
ambiante)/650°C
This European Standard was approved by CEN on 28 February 2001.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2001 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 3015:2001 E
worldwide for CEN national Members.
Page 2
Foreword
This European Standard has been prepared by the European Association of Aerospace Manufacturers
(AECMA).
After inquiries and votes carried out in accordance with the rules of this Association, this Standard has
received the approval of the National Associations and the Official Services of the member countries of
AECMA, prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by December 2001, and conflicting national standards shall be
withdrawn at the latest by December 2001.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark,
Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal,
Spain, Sweden, Switzerland and the United Kingdom.
Page 3
1 Scope
This standard specifies the characteristics of self-locking serrated shank nuts in FE-PA2601, silver plated, for
aerospace applications.
1) 2)
Classification: 1 100 MPa / 650 °C
NOTE FE-PA2601 is the new designation for FE-PA92HT, see TR 3900.
2 Normative references
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.