EN 2399:2008

Aerospace series - Heat resisting steel FE-PA2601 (X4NiCrTiMoV26-15) - Rm ≥ 900 MPa - Bars for forged bolts - D ≤ 25 mm

This standard specifies the requirements relating to:
   Heat resisting steel FE-PA2601 (X4NiCrTiMoV26-15),
   Rm ≥ 900 MPa,
   Bars for forged bolts,
   D ≤ 25 mm,
for aerospace applications.

Luft- und Raumfahrt - Hochwarmfester Stahl FE-PA2601 (X4NiCrTiMoV26-15) - Rm ≥ 900 MPa - Stangen zum Warmstauchen für Schrauben - D ≤ 25 mm

Série aérospatiale - Acier résistant à chaud FE-PA2601 (X4NiCrTiMoV26-15) - Rm ≥ 900 MPa - Barres pour boulonnerie matricée - D ≤ 25 mm

Aeronavtika - Toplotno odporno jeklo FE-PA2601 (X4NiCrTiMoV26-15) - Rm >= 900 MPa - Palice za kovane vijake - D =< 25 mm

General Information

• Status: Published
• Publication Date: 22-Apr-2008
• Withdrawal Date: 30-Oct-2008
• ICS: 49.025.10 - Steels
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 4 - Metallic
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 23-Apr-2008
• Completion Date: 23-Apr-2008
• Ref Project: SIST EN 2399:2008 - Aerospace series - Heat resisting steel FE-PA2601 (X4NiCrTiMoV26-15) - Rm ≥ 900 MPa - Bars for forged bolts - D ≤ 25 mm

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 2399:2008
01-julij-2008
Aeronavtika - Toplotno odporno jeklo FE-PA2601 (X4NiCrTiMoV26-15) - Rm >= 900
MPa - Palice za kovane vijake - D =< 25 mm
$HURVSDFHVHULHV+HDWUHVLVWLQJVWHHO)(3$;1L&U7L0R95P•
03D%DUVIRUIRUJHGEROWV'”PP
/XIWXQG5DXPIDKUW+RFKZDUPIHVWHU6WDKO)(3$;1L&U7L0R95P•
03D6WDQJHQ]XP:DUPVWDXFKHQIU6FKUDXEHQ'”PP
6pULHDpURVSDWLDOH$FLHUUpVLVWDQWjFKDXG)(3$;1L&U7L0R95P•
03D%DUUHVSRXUERXORQQHULHPDWULFpH'”PP
Ta slovenski standard je istoveten z: EN 2399:2008
ICS:
49.025.10 Jekla Steels
SIST EN 2399:2008 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN 2399

NORME EUROPÉENNE

EUROPÄISCHE NORM
April 2008
ICS 49.025.10
English Version
Aerospace series - Heat resisting steel FE-PA2601
(X4NiCrTiMoV26-15) - Rm ≥ 900 MPa - Bars for forged bolts -
D ≤ 25 mm
Série aérospatiale - Acier résistant à chaud FE-PA2601 Luft- und Raumfahrt - Hochwarmfester Stahl FE-PA2601
(X4NiCrTiMoV26-15) - Rm ≥ 900 MPa - Barres pour (X4NiCrTiMoV26-15) - Rm ≥ 900 MPa - Stangen zum
boulonnerie matricée - D ≤ 25 mm Warmstauchen für Schrauben - D ≤ 25 mm
This European Standard was approved by CEN on 29 February 2008.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.






EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2008 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 2399:2008: E
worldwide for CEN national Members.

---------------------- Page: 2 ----------------------

EN 2399:2008 (E)
Foreword
This document (EN 2399:2008) has been prepared by the Aerospace and Defence Industries Association of
Europe - Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this Standard has
received the approval of the National Associations and the Official Services of the member countries of ASD,
prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by October 2008, and conflicting national standards shall be withdrawn at
the latest by October 2008.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
2

---------------------- Page: 3 ----------------------

EN 2399:2008 (E)
Introduction
This standard is part of the series of EN metallic material standards for aerospace applications. The general
organization of this series is described in EN 4258.
This standard has been prepared in accordance with EN 4500-3.
1 Scope
This standard specifies the requirements relating to:
Heat resisting steel FE-PA2601 (X4NiCrTiMoV26-15)
R ≥ 900 MPa
m
Bars for forged bolts
D ≤ 25 mm
for aerospace applications.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
EN 2002-16, Aerospace series — Metallic m
...