EN 3716-004:2006

Aerospace series - Connectors, single-way with triaxial interface, for transmission of digital data - Part 004: Solder plug - Product standard

This standard specifies the requirements and assembly instructions for solder plugs, with or without braid connection, equipped with a male or female contact, used according to EN 3716-002 on cables conforming to EN 3375-003, EN 3375-004 or EN 3375-005.

Luft- und Raumfahrt - Steckverbinder, triaxial für digitale Datenübertragung in einer Richtung - Teil 004: Stecker, lötbar - Produktnorm

Diese Norm legt die Anforderungen und Montagehinweise für Stecker in Lötausführung, mit oder ohne Schirmanschluss, mit Stift- oder Buchsenkontakt, zur Verwendung nach EN 3716-002 mit Leitungen nach EN 3375 003, EN 3375-004 oder EN 3375-005 fest.

Série aérospatiale - Connecteur, monovoie, avec interface triaxiale, pour transmission de données numériques - Partie 004 : Fiche à souder - Norme de produit

Aeronavtika - Konektorji, enosmerni, triaksialni, za digitalni prenos podatkov - 004. del: Vtič, za spajkanje - Standard za proizvod

General Information

• Status: Withdrawn
• Publication Date: 16-May-2006
• Withdrawal Date: 16-Dec-2014
• ICS: 49.060 - Aerospace electric equipment and systems
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 2 - Electrical
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 17-Dec-2014
• Ref Project: SIST EN 3716-004:2009 - Aerospace series - Connectors, single-way with triaxial interface, for transmission of digital data - Part 004: Solder plug - Product standard

Relations

• Replaced By: EN 3716-004:2014 - Aerospace series - Connectors, single-way with triaxial interface for transmission of digital data - Part 004: Solder plug and terminator - Product standard
• Effective Date: 07-Mar-2012

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Luft- und Raumfahrt - Steckverbinder, triaxial für digitale Datenübertragung in einer Richtung - Teil 004: Stecker, lötbar - ProduktnormSérie aérospatiale - Connecteur, monovoie, avec interface triaxiale, pour transmission de données numériques - Partie 004 : Fiche à souder - Norme de produitAerospace series - Connectors, single-way with triaxial interface, for transmission of digital data - Part 004: Solder plug - Product standard49.060Aerospace electric equipment and systemsICS:Ta slovenski standard je istoveten z:EN 3716-004:2006SIST EN 3716-004:2009en,de01-september-2009SIST EN 3716-004:2009SLOVENSKI
STANDARD



SIST EN 3716-004:2009



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 3716-004May 2006ICS 49.060 English VersionAerospace series - Connectors, single-way with triaxial interface,for transmission of digital data - Part 004: Solder plug - ProductstandardSérie aérospatiale - Connecteur, monovoie, avec interfacetriaxiale, pour transmission de données numériques - Partie004 : Fiche à souder - Norme de produitLuft- und Raumfahrt - Steckverbinder, triaxial für digitaleDatenübertragung in einer Richtung - Teil 004: Stecker,lötbar - ProduktnormThis European Standard was approved by CEN on 20 February 2006.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2006 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 3716-004:2006: ESIST EN 3716-004:2009



EN 3716-004:2006 (E) 2 Contents Page Foreword.3 1 Scope.4 2 Normative references.4 3 Terms and definitions.4 4 Required characteristics.4 5 Technical specification.6 6 Designation.6 7 Marking.6 8 Assembly instructions.6
SIST EN 3716-004:2009



EN 3716-004:2006 (E) 3 Foreword This European Standard (EN 3716-004:2006) has been prepared by the European Association of Aerospace Manufacturers - Standardization (AECMA-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of AECMA, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by November 2006, and conflicting national standards shall be withdrawn at the latest by November 2006. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the natio
...