EN 1849-2:2009

Flexible sheets for waterproofing - Determination of thickness and mass per unit area - Part 2: Plastic and rubber sheets

This European Standard specifies methods for the determination of the thickness and mass per unit area of plastic and rubber sheets for roof waterproofing.

Abdichtungsbahnen - Bestimmung der Dicke und der flächenbezogenen Masse - Teil 2: Kunststoff- und Elastomerbahnen für Dachabdichtungen

Diese Europäische Norm legt Verfahren zur Bestimmung der Dicke und des Flächengewichtes von
Kunststoff- und Elastomerbahnen für Dachabdichtungen fest.

Feuilles souples d'étanchéité - Détermination de l'épaisseur et de la masse surfacique — Partie 2: Feuilles d'étanchéité de toiture plastiques et élastomères

La présente Norme européenne spécifie des méthodes permettant de déterminer l'épaisseur et la masse
surfacique de feuilles plastiques et élastomères pour étanchéité de toiture.

Hidroizolacijski trakovi - Določevanje debeline in mase na enoto površine - 2. del: Polimerni in elastomerni trakovi za tesnjenje streh

Ta evropski standard določa metode za določevanje debeline in mase na enoto površine polimernih in elastomernih trakov za tesnjenje streh.

General Information

• Status: Withdrawn
• Publication Date: 08-Dec-2009
• Withdrawal Date: 09-Jul-2019
• ICS: 91.100.50 - Binders. Sealing materials
• Technical Committee: CEN/TC 254 - Flexible sheets for water proofing
• Drafting Committee: CEN/TC 254/SC 2 - Synthetic sheets
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 10-Jul-2019
• Mandate: M/102 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on membranes
• Ref Project: SIST EN 1849-2:2010 - Flexible sheets for waterproofing - Determination of thickness and mass per unit area - Part 2: Plastic and rubber sheets

Relations

• Replaces: EN 1849-2:2001 - Flexible sheets for waterproofing - Determination of thickness and mass per unit area - Part 2: Plastic and rubber sheets for roof waterproofing
• Effective Date: 12-Dec-2009
• Replaced By: EN 1849-2:2019 - Flexible sheets for waterproofing - Determination of thickness and mass per unit area - Part 2: Plastics and rubber sheets for roof waterproofing
• Effective Date: 15-Jun-2016

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Abdichtungsbahnen - Bestimmung der Dicke und der flächenbezogenen Masse - Teil 2: Kunststoff- und Elastomerbahnen für DachabdichtungenFeuilles souples d'étanchéité - Détermination de l'épaisseur et de la masse surfacique — Partie 2: Feuilles d'étanchéité de toiture plastiques et élastomèresFlexible sheets for waterproofing - Determination of thickness and mass per unit area - Part 2: Plastic and rubber sheets91.100.50Veziva. Tesnilni materialiBinders. Sealing materials91.060.20StreheRoofsICS:Ta slovenski standard je istoveten z:EN 1849-2:2009SIST EN 1849-2:2010en,fr,de01-april-2010SIST EN 1849-2:2010SLOVENSKI
STANDARDSIST EN 1849-2:20011DGRPHãþD

EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 1849-2
December 2009 ICS 91.100.50 Supersedes EN 1849-2:2001English Version
Flexible sheets for waterproofing - Determination of thickness and mass per unit area - Part 2: Plastic and rubber sheets
Feuilles souples d'étanchéité -Détermination de l'épaisseur et de la masse surfacique - Partie 2: Feuilles d'étanchéité de toiture plastiques et élastomères
Abdichtungsbahnen - Bestimmung der Dicke und der flächenbezogenen Masse - Teil 2: Kunststoff- und Elastomerbahnen für Dachabdichtungen This European Standard was approved by CEN on 19 October 2009.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2009 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1849-2:2009: ESIST EN 1849-2:2010
...