prEN 4075
(Main)Aerospace series - Screws, pan head, offset cruciform recess, threaded to head, in corrosion resisting steel, passivated, metric - Classification: 490 MPa (at ambient temperature) / 425 °C
Aerospace series - Screws, pan head, offset cruciform recess, threaded to head, in corrosion resisting steel, passivated, metric - Classification: 490 MPa (at ambient temperature) / 425 °C
This document specifies the characteristics of screws, pan head, offset cruciform recess, threaded to head, in corrosion resisting steel, passivated, metric.
Classification: 490 MPa /425 °C
Luft- und Raumfahrt - Flachkopfschraube, mit Flügelkreuzschlitz, Gewinde annähernd bis Kopf, aus korrosionsbeständigem Stahl, passiviert, metrisch - Klasse: 490 MPa (bei Umgebungstemperatur)/425 °C
Série aérospatiale - Vis à tête cylindrique, à empreinte cruciforme déportée, filetée jusqu‘à proximité de la tête, en acier résistant à la corrosion, passivée, série métrique - Classification : 490 MPa (à température ambiante)/425 °C
Le présent document spécifie les caractéristiques des vis à tête cylindrique, à empreinte cruciforme déportée, filetées jusqu'à proximité de la tête, en acier résistant à la corrosion, passivées, série métrique.
Classification : 490 MPa /425 °C.
Aeronavtika - Vijaki, valjasta glava, križna zareza, z navojem do glave, iz korozijsko odpornega jekla, pasivirani, metrični - Klasifikacija: 490 MPa (pri temperaturi okolice) / 425 °C
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN 4075:2024
01-maj-2024
Aeronavtika - Vijaki, valjasta glava, križna zareza, z navojem do glave, iz korozijsko
odpornega jekla, pasivirani, metrični - Klasifikacija: 490 MPa (pri temperaturi
okolice) / 425 °C
Aerospace series - Screws, pan head, offset cruciform recess, threaded to head, in
corrosion resisting steel, passivated, metric - Classification: 490 MPa (at ambient
temperature) / 425 °C
Luft- und Raumfahrt - Flachkopfschraube, mit Flügelkreuzschlitz, Gewinde annähernd
bis Kopf, aus korrosionsbeständigem Stahl, passiviert, metrisch - Klasse: 490 MPa (bei
Umgebungstemperatur)/425 °C
Série aérospatiale - Vis à tête cylindrique, à empreinte cruciforme déportée, filetée
jusqu‘à proximité de la tête, en acier résistant à la corrosion, passivée, série métrique -
Classification : 490 MPa (à température ambiante)/425 °C
Ta slovenski standard je istoveten z: prEN 4075
ICS:
49.025.10 Jekla Steels
49.030.20 Sorniki, vijaki, stebelni vijaki Bolts, screws, studs
oSIST prEN 4075:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 4075:2024
---------------------- Page: 2 ----------------------
oSIST prEN 4075:2024
DRAFT
EUROPEAN STANDARD
prEN 4075
NORME EUROPÉENNE
EUROPÄISCHE NORM
January 2024
ICS 49.030.20 Will supersede EN 4075:2008
English Version
Aerospace series - Screws, pan head, offset cruciform
recess, threaded to head, in corrosion resisting steel,
passivated, metric - Classification: 490 MPa (at ambient
temperature) / 425 °C
Série aérospatiale - Vis à tête cylindrique, à empreinte Luft- und Raumfahrt - Flachkopfschraube, mit
cruciforme déportée, filetée jusqu'à proximité de la Flügelkreuzschlitz, Gewinde annähernd bis Kopf, aus
tête, en acier résistant à la corrosion, passivée, série korrosionsbeständigem Stahl, passiviert, metrisch -
métrique - Classification : 490 MPa (à température Klasse: 490 MPa (bei Umgebungstemperatur)/425 °C
ambiante)/425 °C
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee ASD-
STAN.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 4075:2024 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 4075:2024
prEN 4075:2024 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Required characteristics . 5
4.1 Configuration – Dimensions – Masses . 5
4.2 Tolerances of f
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.