EN ISO 15848-2:2006

Industrial valves - Measurement, test and qualification procedures for fugitive emissions - Part 2: Production acceptance test of valves (ISO 15848-2:2006)

ISO 15848-2:2006 specifies test procedures for the evaluation of external leakage of valve stems or shafts and body joints of isolating valves and control valves intended for application with volatile air pollutants and hazardous fluids. End connection joints, vacuum application, effects of corrosion and radiation are excluded. The production acceptance test is intended for standard production valves where fugitive emissions standards are specified.

Industriearmaturen - Mess-, Prüf- und Qualifikationsverfahren für flüchtige Emissionen - Teil 2: Fertigungsbegleitende Abnahmeprüfung von Armaturen (ISO 15848-2:2006)

Dieser Teil der ISO 15848 legt die Prüfverfahren zur Bewertung der äußeren Undichtheit von Armaturen¬schäften (oder  wellen), Gehäuseverbindungen von Absperrarmaturen und Stellgeräten zur Verwendung mit flüchtigen luftverunreinigenden Stoffen und gefährlichen Flüssigkeiten fest. Anschlussverbindungen, Anwendungen in der Vakuumtechnik, Auswirkungen von Korrosion und Bestrahlung fallen nicht in den Anwendungsbereich dieses Teils der ISO 15848.
Das fertigungsbegleitende Abnahmeprüfverfahren ist für standardge¬fertigte Armaturen bestimmt, für die Normen über flüchtige Emissionen gelten.

Robinetterie industrielle - Mesurage, essais et modes opératoires de qualification pour émissions fugitives - Partie 2: Essais de réception en production des appareils de robinetterie (ISO 15848-2:2006)

L'ISO 15848-2:2006 spécifie des modes opératoires pour l'évaluation des fuites externes des tiges (ou arbres) des appareils de robinetterie et des jonctions de corps des robinets de sectionnement et des robinets de régulation destinés à être utilisés au contact de polluants atmosphériques volatils et de fluides dangereux. Les jonctions des raccords d'extrémité, les applications sous vide ainsi que les effets de la corrosion et des rayonnements sont exclus de l'ISO 15848-2:2006. Les essais de réception en production sont prévus pour les appareils de robinetterie normalisés dont les normes d'émissions fugitives sont spécifiées.

Industrijski ventili – Meritve, preskusi in postopki kvalificiranja pobeglih emisij – 2. del: Proizvodni preskusi ustreznosti ventilov (ISO 15848-2:2006)

General Information

• Status: Withdrawn
• Publication Date: 14-Aug-2006
• Withdrawal Date: 09-Jun-2015
• ICS: 23.060.01 - Valves in general
• Technical Committee: CEN/TC 69 - Industrial valves
• Drafting Committee: CEN/TC 69/WG 1 - Basic standards
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 10-Jun-2015
• Ref Project: SIST EN ISO 15848-2:2007 - Industrial valves - Measurement, test and qualification procedures for fugitive emissions - Part 2: Production acceptance test of valves (ISO 15848-2:2006)

Relations

• Replaced By: EN ISO 15848-2:2015 - Industrial valves - Measurement, test and qualification procedures for fugitive emissions - Part 2: Production acceptance test of valves (ISO 15848-2:2015)
• Effective Date: 24-Jun-2015

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Industrial valves - Measurement, test and qualification procedures for fugitive emissions - Part 2: Production acceptance test of valves (ISO 15848-2:2006)Industrijski ventili – Meritve, preskusi in postopki kvalificiranja pobeglih emisij – 2. del: Proizvodni preskusi ustreznosti ventilov (ISO 15848-2:2006)Robinetterie industrielle - Mesurage, essais et modes opératoires de qualification pour émissions fugitives - Partie 2: Essais de réception en production des appareils de robinetterie (ISO 15848-2:2006)Industriearmaturen - Mess-, Prüf- und Qualifikationsverfahren für flüchtige Emissionen - Teil 2: Fertigungsbegleitende Abnahmeprüfung von Armaturen (ISO 15848-2:2006)Ta slovenski standard je istoveten z:EN ISO 15848-2:2006SIST EN ISO 15848-2:2007en23.060.01Ventili na splošnoValves in generalICS:SLOVENSKI
STANDARDSIST EN ISO 15848-2:200701-januar-2007

EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN ISO 15848-2August 2006ICS 23.060.01 English VersionIndustrial valves - Measurement, test and qualificationprocedures for fugitive emissions - Part 2: Productionacceptance test of valves (ISO 15848-2:2006)Robinetterie industrielle - Mesurage, essais et modesopératoires de qualification pour émissions fugitives - Partie2: Essais de réception en production des appareils derobinetterie (ISO 15848-2:2006)Industriearmaturen - Mess-, Prüf- undQualifikationsverfahren für flüchtige Emissionen - Teil 2:Fertigungsbegleitende Abnahmeprüfung von Armaturen(ISO 15848-2:2006)This European Standard was approved by CEN on 26 June 2006.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2006 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN ISO 15848-2:2006: E

Foreword
This document (EN ISO 15848-2:2006) has been prepared by Technical Committee ISO/TC 153 "Valves" in collaboration with Technical Committee CEN/TC 69 "Industrial valves", the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by February 2007, and conflicting national standards shall be withdrawn at the latest by February 2007.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Endorsement notice
The text of ISO 15848-2:2006 has been approved by CEN as EN ISO 15848-2:2006 without any modifications.

Reference numberISO 15848-2:2006(E)© ISO 2006
INTERNATIONAL STANDARD ISO15848-2First edition2006-08-15Industrial valves — Measurement, test and qualification procedures for fugitive emissions — Part 2: Production acceptance test of valves Robinetterie industrielle — Mesurage, essais et modes opératoires de qualification pour émissions fugitives —
Partie 2: Essais de réception en production des appareils de robinetterie

ISO 15848-2:2006(E) PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
©
ISO 2006 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's member body in the country of the requester. ISO copyright office Case postale 56 • CH-1211 Geneva 20 Tel.
+ 41 22 749 01 11 Fax
+ 41 22 749 09 47 E-mail
[e-mail] Web
www.iso.org Published in Switzerland
ii © ISO 2006 – All rights reserved

ISO 15848-2:2006(E) © ISO 2006 – All rights reserved iiiForeword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International
...