iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

CEN/TR 17499:2020

(Main)

Bitumen and bituminous binders - Examples for CE Marking and Declaration of Performances (DoP)

Bitumen and bituminous binders - Examples for CE Marking and Declaration of Performances (DoP)

This document provides examples of Declaration of Performance (DoP) and CE Marking for bitumen and bituminous binders for use in the construction and maintenance of roads, airfields and other paved areas.
NOTE 1   Only harmonized technical specifications (product standards or ETAs) cited in the OJEU are the basis for drawing up the Declaration of Performance.
NOTE 2   The product standards this document is related to, are listed in the bibliography.
NOTE 3   The EC database of all harmonized standards is available at
https://ec.europa.eu/growth/tools-databases/nando/index.cfm?fuseaction=cp.hs&cpr=Y .

Bitumen und bitumenhaltige Bindemittel - Beispiele zur CE-Kennzeichnung und Leistungserklärung (DoP)

Bitumes et liants bitumineux - Exemples pour le Marquage CE et la Déclaration de Performance (DoP)

Ce document propose des exemples de Déclaration de Performance (DoP) et de Marquage CE pour les bitumes et liants bitumineux utilisables pour la construction et l’entretien des chaussées routières, aéroportuaires et d’autres chaussées.
NOTE 1   Seules les Normes européennes harmonisées (hEN) (normes produits) ou les Évaluations Techniques Européennes (ETE), citées au Journal Officiel de l'Union Européenne (JOUE), peuvent servir de base à l'établissement de Déclarations de Performance (DoP).
NOTE 2   Les normes produits couvertes par ce document sont listées dans la bibliographie.
NOTE 3   La base de données listant l’ensemble des Normes européennes harmonisées en vigueur est accessible sur le site internet public de la Commission Européenne à l'adresse
https://ec.europa.eu/growth/tools-databases/nando/index.cfm?fuseaction=cp.hs&cpr=Y

Bitumen in bitumenska veziva - Primeri oznake CE in izjave o lastnostih (DoP)

General Information

Status
Published
Publication Date
11-Aug-2020
ICS
91.100.50 - Binders. Sealing materials
Technical Committee
CEN/TC 336 - Bituminous binders
Drafting Committee
CEN/TC 336 - Bituminous binders
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
12-Aug-2020
Due Date
28-Sep-2020
Completion Date
12-Aug-2020
Ref Project
SIST-TP CEN/TR 17499:2020 - Bitumen and bituminous binders - Examples for CE Marking and Declaration of Performances (DoP)

Buy Standard

TP CEN/TR 17499:2020TP CEN/TR 17499:2020
PreviousNext
Technical report
TP CEN/TR 17499:2020
English language
12 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-oktober-2020
Bitumen in bitumenska veziva - Primeri oznake CE in izjave o lastnostih (DoP)
Bitumen and bituminous binders - Examples for CE Marking and Declaration of
Performances (DoP)
Bitumen und bitumenhaltige Bindemittel - Beispiele zur CE-Kennzeichnung und
Leistungserklärung (DoP)
Bitumes et liants bitumineux - Exemples pour le Marquage CE et la Déclaration de
Performance (DoP)
Ta slovenski standard je istoveten z: CEN/TR 17499:2020
ICS:
75.140 Voski, bitumni in drugi naftni Waxes, bituminous materials
proizvodi and other petroleum products
91.100.50 Veziva. Tesnilni materiali Binders. Sealing materials
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

CEN/TR 17499
TECHNICAL REPORT
RAPPORT TECHNIQUE
August 2020
TECHNISCHER BERICHT
ICS 91.100.50
English Version
Bitumen and bituminous binders - Examples for CE
Marking and Declaration of Performances (DoP)
Bitumes et liants bitumineux - Exemples pour le Bitumen und bitumenhaltige Bindemittel - Beispiele
Marquage CE et la Déclaration de Performance (DoP) zur CE-Kennzeichnung und Leistungserklärung (DoP)

This Technical Report was approved by CEN on 26 July 2020. It has been drawn up by the Technical Committee CEN/TC 336.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN/TR 17499:2020 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Declaration of Performance (DoP) . 6
4.1 General . 6
4.2 AVCP System 2+ . 6
4.3 Content . 6
4.4 Example of DoP . 7
5 CE Marking and labelling . 9
Bibliography . 12

European foreword
This document (CEN/TR 17499:2020) has been prepared by Technical Committee CEN/TC 336
“Bituminous binders”, the secretariat of which is held by AFNOR.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This is a new document.
Introduction
European harmonised standards in support of the Construction Products Regulation (Regulation (EU) No
305/2011) (CPR) do not contain examples of CE marking.
This document is not aiming to replace or supplement the Construction Products Regulation (Regulation
(EU) No 305/2011) and all terms of responsibility remain as outlined therein. However, this Technical
Report is aiming to assist communication by providing examples. More detailed information can be found
at https://ec.europa.eu/growth/sectors/construction/product-regulation_en .

1 Scope
This document provides examples of Declaration of Performance (DoP) and CE Marking for bitumen and
bituminous binders for use in the construction and maintenance of roads, airfields and other paved areas.
NOTE 1 Only harmonized technical specifications (product standards or ETAs) cited in the OJEU are the basis for
drawing up the Declaration of Performance.
NOTE 2 The product standards this document is related to, are listed in the bibliography.
NOTE 3 The EC database of all harmonized standards is available at
https://ec.europa.eu/growth/tools-databases/nando/index.cfm?fuseaction=cp.hs&cpr=Y .
2 Normative references
There are no normative references in this document.
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
— IEC Electropedia: available at http://www.electropedia.org/
— ISO Online browsing platform: available at http://www.iso.org/obp
3.1
AVCP
Assessment and Verification of Constancy of Performance
3.2
CE Marking
marking by which the manufacturer indicates that the product is in conformity with the Declaration of
Performance for the construction product
Note 1 to entry: CE Marking, in the scope of the CPR, is not a certificate of conformity, it stands for the
commitment of the supplier to compliance of the construction product with its Declaration of Performance.
Note 2 to entry: Declaration of Performance and thereafter CE Marking are mandatory for any construction
product falling within the scope of a European harmonized standard.
3.3
CPR
Construction Products Regulation - Regulation (EU) No 305/2011
Note 1 to entry: This document is available at
https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32011R0305.
3.4
DoP
Declaration of Performance of the manufacturer for a construction product
3.5
Notified Body
Notified product certification body
[SOURCE: article 39 of the Regulation (EU) No 305/2011 (CPR)]
3.6
Unique code of identification
Unique identification of the construction product
4 Declaration of Performance (DoP)
4.1 General
The Declaration of Performance is described in Articles 4 to 7 of the CPR (the Regulation (EU)
No 305/2011).
4.2 AVCP System 2+
The manufacturer draws up the DoP and affixes the CE Marking on the basis of the applicable AVCP
system. The applicable AVCP system for bitumen and bituminous binders for use in the construction and
maintenance of roads, airfields and other paved areas is system 2+. Details on AVCP systems are outlined
in Annex V of the Regulation (EU) No 305/2011 (CPR).
4.3 Content
The content of the DoP is described in Article 6 of the CPR. Annex III of the Regulation (EU) No 305/2011
(CPR) provides a model of the DoP. This Annex III was amended by Commission Delegated Regulation
(EU) No 574/2014 of 21 February 2014.
NOTE This document is available at
https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32014R0574.
This Regulation stipulates that the DoP for construction products covered by a harmonized standard shall
contain the following information:
— the number of the DoP as foreseen in Article 9 (2) of Regulation (EU) No 305/2011 (CPR);
— the unique identification code of the product-type (may be the same as the reference number of the
DoP);
— the intended use(s);
— the manufacturer (the name, the registered trade name or registered trade mark and the contact
address of the manufacturer, as required pursuant to Article 11(5) of Regulation (EU) No 305/2011);
— the authorized representative (if applicable, see Delegated Regulation (EU) No 574/2014);
— the system/s of the AVCP (if there are multiple systems, each of them shall be declared);
NOTE In the case of bituminous binders only the system 2+ applies.
— the reference number of the harmonized standard and its date of issue (dated reference);
— the identification number of the Notified Body/ies;
— the list of essential characteristics, as determined in the harmonized technical specification
(An
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 12594:2024(Main)
Bitumens and bituminous binders - Preparation of test samples
SIST EN 12594:2024

This document specifies methods for preparing test samples of bitumens and bituminous binders in order to test their properties.
WARNING - The use of this document can involve hazardous materials, operations and equipment. This document does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this document to establish appropriate safety and health practices and to determine the applicability of regulatory limitations prior to use.

  • Draft
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12597:2024(Main)
Bitumens and bituminous binders - Terminology
SIST EN 12597:2024

This European Standard defines terms for paving or industrial bitumen of various types and binders derived from bitumen.
This European Standard is intended to cover materials only within the scope of CEN/TC 336, i.e. only bitumens and bituminous binders. It should consequently not extend to non-petroleum "hydrocarbon" binders such as coal tar and its derivatives or to natural asphalts. However, some definitions are given for some excluded materials and related terms. The corresponding terms were introduced only when they appeared in a definition of a product or process and when their definition was found necessary for understanding or for avoiding any ambiguity.

  • Draft
    24 pages
    English, French and German language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16346:2023(Main)
Bitumen and bituminous binders - Determination of breaking behaviour and immediate adhesivity of cationic bituminous emulsions
SIST EN 16346:2024

This document specifies a method for the determination of the breaking and immediate adhesivity behaviour of cationic bituminous emulsions in contact with aggregate. The method applies to emulsions used for surface dressing and similar applications and can be used for formulation as well as for production control purposes.
WARNING — The use of this document can involve hazardous materials, operations and equipment. This document does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this document to establish appropriate safety and health practices and to determine the applicability of regulatory limitations prior to use.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12596:2023(Main)
Bitumen and bituminous binders - Determination of dynamic viscosity by vacuum capillary
SIST EN 12596:2023

This document specifies a method for the determination of the dynamic viscosity of bituminous binders by means of a vacuum capillary viscometer at 60 °C in a range between 0,003 6 Pa⋅s and 580 000 Pa⋅s. Other temperatures are possible if calibration constants are known. Bituminous emulsions and non-newtonian binders (e.g. some polymer modified bitumen) are not within the scope of this method.
WARNING - The use of this document can involve hazardous materials, operations and equipment. This document does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this document to identify the hazards and assess the risks involved in performing this test method and to implement sufficient control measures to protect individual operators (and the environment). This includes appropriate safety and health practices and determination of the applicability of regulatory limitations prior to use.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14770:2023(Main)
Bitumen and bituminous binders - Determination of complex shear modulus and phase angle - Dynamic Shear Rheometer (DSR)
SIST EN 14770:2023

This document specifies a general method of using a dynamic shear rheometer (DSR) for measuring the rheological properties of bituminous binders. The procedure involves determining the complex shear modulus and phase angle of binders over a range of test frequencies and test temperatures when tested in oscillatory shear.
From the test, the complex shear modulus, |G*|, and its phase angle, δ, at a given temperature and frequency are calculated, as well as the components G' and G" of the complex shear modulus.
This method is applicable to un-aged, aged, stabilized and recovered bituminous binders. The test procedure in accordance with this document is not applicable for bituminous binders with particles larger than 250 μm (e.g. filler material, granulated rubber).
WARNING - The use of this document can involve hazardous materials, operations and equipment. This document does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this document to establish appropriate safety and health practices and to determine the applicability of regulatory limitations prior to use.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14771:2023(Main)
Bitumen and bituminous binders - Determination of the flexural creep stiffness - Bending Beam Rheometer (BBR)
SIST EN 14771:2023

This document specifies a method for the determination of the flexural creep stiffness of bitumen and bituminous binders in the range of 30 MPa to 1 GPa by means of the bending beam rheometer.
The method can be applied to a variety of bitumens, including unmodified as well as modified binders, as fresh (unused) binders, as well as binders after laboratory ageing conditioning (e.g. EN 12607-1, EN 14769), and also binders that have been recovered from asphalt mixtures.
WARNING - The use of this document can involve hazardous materials, operations and equipment. This document does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this document to establish appropriate safety and health practices and to determine the applicability of regulatory limitations prior to use.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12595:2023(Main)
Bitumen and bituminous binders - Determination of kinematic viscosity
SIST EN 12595:2023

This document specifies a method for the determination of the kinematic viscosity of bituminous binders at 60 °C and 135 °C, in a range from 6 mm2/s to 300 000 mm2/s. Other temperatures are possible if calibration constants are known. Bituminous emulsions are not covered within the scope of this method.
Results for this method can be used to calculate dynamic viscosity when the density of the test material is known or can be determined.
NOTE   This document assumes Newtonian behaviour of the sample at test conditions.
WARNING - The use of this document can involve hazardous materials, operations and equipment. This document does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this document to identify the hazards and assess the risks involved in performing this test method and to implement sufficient control measures to protect individual operators (and the environment). This includes appropriate safety and health practices and determination of the applicability of regulatory limitations prior to use.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14769:2023(Main)
Bitumen and bituminous binders - Accelerated long-term ageing conditioning by a Pressure Ageing Vessel (PAV)
SIST EN 14769:2023

This document specifies an accelerated long-term ageing/conditioning procedure for bituminous binders. The procedure involves ageing trays of binder at elevated temperatures under pressurized conditions in a pressure ageing vessel (PAV).
NOTE   For binders to be used in hot and warm asphalt applications, the pre-conditioning of the sample can be performed using one of the methods in the EN 12607 series. For binders to be used in bituminous emulsion and cut back or fluxed applications, the stabilization of the sample is such that there are no volatiles remaining.
WARNING - The use of this document can involve hazardous materials, operations and equipment, in particular, the use of a high pressure ageing vessel. This document does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this document to establish appropriate health and safety practices and determine the applicability of regulatory limitations prior to use. If there is the likelihood of volatile components being present in a binder, this procedure is not used.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12846-2:2022(Main)
Bitumen and bituminous binders - Determination of efflux time by the efflux viscometer - Part 2: Cut-back and fluxed bituminous binders
SIST EN 12846-2:2023

This document specifies a method for the determination of the efflux time at 25 °C of petroleum cut-back and fluxed bituminous binders in seconds using an efflux viscometer. Alternative test temperatures are 40 °C, 50 °C and 60 °C.
WARNING - The use of this document involves hazardous materials, operations and equipment. This document does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this document to establish appropriate safety and health practices and to determine the applicability of regulatory limitations prior to use.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12846-1:2022(Main)
Bitumen and bituminous binders - Determination of efflux time by the efflux viscometer - Part 1: Bituminous emulsions
SIST EN 12846-1:2023

This document specifies a method for the determination of the efflux time at 40 °C of bituminous emulsions in seconds using an efflux viscometer. Alternative test temperature is 50 °C.
NOTE   The procedure described in this document can also be followed to determine efflux time at other temperatures such as 25 °C.
WARNING - The use of this document can involve hazardous materials, operations and equipment. This document does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this document to establish appropriate safety and health practices and to determine the applicability of regulatory limitations prior to use.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day