Industrial, commercial and garage doors and gates - Mechanical aspects - Requirements and test methods

This European Standard specifies mechanical requirements and test methods for manually operated doors, gates and barriers, intended for installation in areas in the reach of persons, and for which the main intended use is giving safe access for goods and vehicles accompanied or driven by persons in industrial, commercial or residential premises.
This European Standard also covers manually operated vertically moving commercial doors such as rolling shutters and rolling grilles, used in retail premises which are mainly provided for goods protection.
This document applies only to doors which are not part of the load carrying structure of the building.
It does not apply to
-   lock gates and dock gates;
-   doors on vehicles;
-   doors mainly for the retention of animals unless they are at the site perimeter;
-   doors intended for pedestrian use;
-   railway barriers.
Whenever the term "door" is used in this document, it is deemed to cover the full scope of types and variances of doors, gates and barriers defined by the scope of this Standard.

Tore - Mechanische Aspekte - Anforderungen und Prüfverfahren

Portes et portails industriels, commerciaux et résidentiels - Aspects mécaniques - Exigences et méthodes d'essai

Vrata v industrijske in javne prostore ter garažna vrata - Mehanske lastnosti - Zahteve in preskusne metode

General Information

Status
Not Published
Publication Date
11-Apr-2021
Withdrawal Date
11-Jul-2021
Current Stage
5060 - Closure of Vote - Formal Approval
Start Date
08-Oct-2020
Due Date
18-Nov-2020
Completion Date
08-Oct-2020

Relations

Buy Standard

Draft
EN 12604:2017/oprA1:2019
English language
6 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-september-2019
Vrata v industrijske in javne prostore ter garažna vrata - Mehanske lastnosti -
Zahteve in preskusne metode
Industrial, commercial and garage doors and gates - Mechanical aspects - Requirements
and test methods
Tore - Mechanische Aspekte - Anforderungen und Prüfverfahren
Portes et portails industriels, commerciaux et résidentiels - Aspects mécaniques -
Exigences et méthodes d'essai
Ta slovenski standard je istoveten z: EN 12604:2017/prA1
ICS:
91.060.50 Vrata in okna Doors and windows
91.090 Konstrukcije zunaj stavb External structures
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

DRAFT
EUROPEAN STANDARD
EN 12604:2017
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA1
June 2019
ICS 91.060.50
English Version
Industrial, commercial and garage doors and gates -
Mechanical aspects - Requirements and test methods
Portes et portails industriels, commerciaux et Tore - Mechanische Aspekte - Anforderungen und
résidentiels - Aspects mécaniques - Exigences et Prüfverfahren
méthodes d'essai
This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 33.

This draft amendment A1, if approved, will modify the European Standard EN 12604:2017. If this draft becomes an amendment,
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 12604:2017/prA1:2019 E
worldwide for CEN national Members.

EN 12604:2017/prA1:2019 (E)
Contents Page
European foreword . 3
1 Modification to 4.2.1, "Operability" . 4
2 Modification to 4.7.4.1, "General" . 4
3 Addition of new Clause 6, "Information for use" . 4
4 Addition of new Clause 7, "Marking" . 6
5 Addition of new Annex C (informative), "Logbook" . 6

EN 12604:2017/prA1:2019 (E)
European foreword
This document (EN 12604:2017/prA1:2019) has been prepared by Technical Committee CEN/TC 33
“Doors, windows, shutters, building hardware and curtain walling”, the secretariat of which is held by
AFNOR.
This document is currently submitted to the CEN Enquiry.
EN 12604:2017/prA1:2019 (E)
1 Modification to 4.2.1, "Operability"
In the third paragraph, replace:
"For components where testing is carried out instead of calculation the safety factor shall be 1,1."
with
"For components where testing is carried out instead of calculation the minimum safety factor before
yield shall be 1,1.".
2 Modification to 4.7.4.1, "General"
Add the following text at the beginning of 4.7.4.1:
"Where necessary for safety (e.g. to avoid excess wear and premature failure of means of suspension)
means shall provide for, and the maintenance of, the correct alignment of sprockets and pulleys with
their associated chains, rope or straps. This shall include the security of fixings to shafts on which
sprockets and pulleys are mounted, and means necessary to prevent lateral displacement of t
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.