EN ISO/IEC 7813:1996

Identification cards - Financial transaction cards (ISO/IEC 7813:1995)

Migrated from Progress Sheet (TC Comment) (2000-07-10): Crash 96 : vote UAP clos 96-04-13. Norme adopt{e. En attente du CEN/CS

Identifikationskarten - Bankkarten (ISO/IEC 7813: 1995)

Cartes d'identification - Cartes de transactions financières (ISO/IEC 7813:1995)

L'IEC 61804-2:2006 est applicable aux blocs fonctionnels (FB) pour les procédés industriels. Elle spécifie les blocs fonctionnels sur la base des résultats du travail d'harmonisation concernant plusieurs éléments. Cette deuxième édition, ainsi que la première édition de la CEI 61804-3, annule et remplace la première édition parue en 2004 de la CEI 61804-2. Elle constitue une révision technique et inclut les modifications suivantes:
- transfert des articles spécifiques au langage EDDL dans la CEI 61804-3;
- les paragraphes 4.1 et 4.2 spécifiques aux blocs fonctionnels, ainsi que les Articles 5, 6, 7 et 8 ne sont pas modifiés. La présente version bilingue (2014-04) correspond à la version anglaise monolingue publiée en 2006-09.

Identification cards - Financial transaction cards (ISO/IEC 7813:1995)

General Information

• Status: Withdrawn
• Publication Date: 23-Jul-1996
• Withdrawal Date: 11-Jan-2000
• ICS: 35.240.15 - Identification cards. Chip cards. Biometrics
• Technical Committee: CEN/TC 224 - Machine-readable cards, related device interfaces and operations
• Drafting Committee: CEN/TC 224 - Machine-readable cards, related device interfaces and operations
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 12-Jan-2000
• Completion Date: 12-Jan-2000
• Ref Project: SIST EN ISO/IEC 7813:1998 - Identification cards - Financial transaction cards (ISO/IEC 7813:1995)

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Identification cards - Financial transaction cards (ISO/IEC 7813:1995)Identifikationskarten - Bankkarten (ISO/IEC 7813: 1995)Cartes d'identification - Cartes de transactions financieres (ISO/IEC 7813:1995)Identification cards - Financial transaction cards (ISO/IEC 7813:1995)35.240.15Identifikacijske kartice in sorodne napraveIdentification cards and related devicesICS:Ta slovenski standard je istoveten z:EN ISO/IEC 7813:1996SIST EN ISO/IEC 7813:1998en01-junij-1998SIST EN ISO/IEC 7813:1998SLOVENSKI
STANDARD



SIST EN ISO/IEC 7813:1998



SIST EN ISO/IEC 7813:1998



SIST EN ISO/IEC 7813:1998



SIST EN ISO/IEC 7813:1998



SIST EN ISO/IEC 7813:1998



INTERNATIONAL STANDARD lSO/IEC Fourth edition 1995-08-I 5 Identification cards - Financial transaction cards Cartes d ‘iden tifica tion - Cartes de transactions financikres q m Reference number &O/l EC 7813: 1995(E) SIST EN ISO/IEC 7813:1998



ISO/IEC 7813:1995(E) Foreword IS0 (the International Organization for Standardization) and IEC (the International Electrotechnical Commission) form the specialized system for worldwide standardization. National bodies that are members of IS0 or IEC participate in the development of International Standards through technical committees established by the respective organization to deal with particular fields of technical activity. IS0 and IEC technical com- mittees collaborate in fields of mutual interest. Other international organ- izations, governmental and non-governmental, in liaison with IS0 and IEC, also take part in the work. In the field of information technology, IS0 and IEC have established a joint technical committee, lSO/IEC JTC 1. Draft international Standards adopted by the joint technical committee are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the national bodies casting a vote. International Standard lSO/IEC 7813 was prepared by Joint Technical Committee lSO/IEC JTC 1, Information technology, Subcommittee SC 17, /den tifica tion cards and related devices. This fourth edition cancels and replaces the third edition (lSO/IEC 7813:1990), of which it constitutes a technical revision. 0 lSO/IEC 1995 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including protocopying and microfilm, without permission in writing from the publisher. ISOAEC Copyright Office l Case postale 56 l CH-I 211 Geneve 20 l Switzerland Printed in Switzerland SIST EN ISO/IEC 7813:1998



@ lSO/IEC ISO/IEC 7813:1995(E) This International Standard is one of a series of standards describing the parameters for identification cards and the use of such cards for international interchange. SIST EN ISO/IEC 7813:1998



This page intentionally left blank SIST EN ISO/IEC 7813:1998



INTERNATIONAL STANDARD o lSO/IEC ISO/IEC 7813:1995(E) Identification cards - Financial transaction cards 1 Scope This International Standard specifies the requirements for cards used in financial transactions. It takes into consideration both human and machine aspects and states minimum requirements of conformity. It contains iayout, recording techniques, numbering systems, registration procedures, but not security requirements. lSO/IEC 10373 specifies the test procedures used to check cards against the parameters specified in this International Standard. This International Standard specifies the requirements for cards used for identification. It takes into consideration both human and machine aspects and states minimum requirements. NOTE - Numeric values in the SI and/or Imperial measure- ment system in this International Standard may have been rounded off and therefore are consistent with, but not exactly equal to, each other. Either system may be used, but the two should not be intermixed or reconverted. The original design was made using the Imperial measurement system. lSO/IEC 7816-2, and lSO/IEC 7816-3 as specified in clauses 5 to 9. 3 Normative references The following standards contain provisions which, through reference in this text, constitute provisions of this International Standard. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this International Standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. Members of IEC and IS0 maintain registers of currently valid International Standards. lSO/IEC 3166:1993, Codes for the representation of names of countries. lSO/IEC 4217:1990, Codes for the representation of currencies and funds. lSO/IEC 4909:1987, Bank cards - Magnetic stripe data content for track 3. lSO/IEC 7810:1995, Identification cards - Physical characteristics. 2 Conformance An identification card is in conformance with this International Standard if it meets all mandatory requirements specified herein. A prerequisite for conformance with this International Standard is conformance with lSO/l EC 7810, lSO/IEC 781 l-l, lSO/IEC 781 l-2, ISO/I EC 781 l-3, lSO/l EC 7811-4, lSO/IEC 781 l-5, lSO/IEC 7816-1, lSO/l EC 781 l-l : 1995, Identification cards - Record- ing technique - Part 7: Embossing. lSO/IEC 7811-2:1995, Identification cards - Record- ing technique - Part 2: Magnetic stripe. ISOJIEC 781 l-3:1 995, Identification cards - Record- ing technique - Part 3: Location of embossed characters on ID-7 cards. 1 SIST EN ISO/IEC 7813:1998



@ lSO/IEC lSO/l EC 7811-4: 1995, Identification cards - Record- ing technique - Part 4: Location of read-only magnetic tracks - Tracks 7 and 2. ISO/I EC 7811-5: 1995, Identification cards - Record- ing technique - Part 5: Location of read-write magnetic track - Track 3. lSO/IEC 7812-I :I 993, Identification cards - ldentifi- cation of issuers - Part 7: Numbering system. lSO/IEC 7816-I :I 987, Identification cards - Integrat- ed circuit(s) cards with contacts - Part 7: Physical characteristics. lSO/IEC 7816-2:1988, Identification cards - Integrat- ed circuit(s) cards with contacts - Part 2: Dimension and location of the contacts. lSO/IEC 7816-3:1989, Identification cards - Integrat- ed circuit(s) cards with contacts - Part 3: Electronic signals and transmission protocols. IS0 9992-l : 1990, Financial transaction cards 2 Messages between the integrated circuit card and the card accepting device - Part 7: Concepts and structures. lSO/IEC 10373:1993, Identification cards - Test methods. 4 Definitions For the purposes of this International Standard the following definition applies. 6 E
...