EN 6034:2015

Aerospace series - Carbon fibre reinforced plastics - Test method - Determination of interlaminar fracture toughness energy - Mode II - GIIC

This standard specifies the procedure to determine the mode II interlaminar fracture toughness energy GIIC of carbon fibre composites manufactured from unidirectional tape or woven fabric.
This standard does not give any directions necessary to meet health and safety requirements. It is the responsibility of the user of this standard to consult and establish appropriate health and safety precautions.

Luft- und Raumfahrt - Kohlenstofffaserverstärkte Kunststoffe - Prüfverfahren - Bestimmung der interlaminaren Energiefreisetzungsrate - Mode II - GIIC

Diese Norm legt das Verfahren fest zur Bestimmung der interlaminaren Energiefreisetzungsrate GIIC, Mode II, von kohlenstofffaserverstärkten Kunststoffen, die aus gleichgerichtetem Band oder Gewebe hergestellt wurden.
Diese Norm legt keine Anleitung fest, die für das Einhalten der Gesundheits  und Sicherheitsvorschriften erforderlich ist. Es liegt in der Verantwortung des Anwenders dieser Norm, die entsprechenden Gesundheits- und Sicherheitsvorkehrungen zu treffen.

Série aérospatiale - Matières plastiques renforcées de fibres de carbone - Méthode d'essai - Détermination de l'énergie de ténacité en rupture interlaminaire - Mode II - GIIC

Aeronavtika - Z ogljikovimi vlakni ojačeni polimerni materiali - Preskusna metoda - Ugotavljanje energije pri medplastni lomni žilavosti - Način II - GIIC

Ta standard določa postopek za ugotavljanje energije GIIC pri medplastni lomni žilavosti v okviru načina II za kompozite iz ogljikovih vlaken, izdelane iz enosmernega traku ali z vlakni ojačenega materiala.
Ta standard ne vsebuje nobenih smernic, potrebnih za izpolnjevanje zdravstvenih in varnostnih zahtev. Uporabnik tega standarda se mora posvetovati in določiti ustrezne zdravstvene in varnostne ukrepe.

General Information

• Status: Published
• Publication Date: 24-Nov-2015
• Withdrawal Date: 30-May-2016
• ICS: 49.025.40 - Rubber and plastics
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 4 - Metallic
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 25-Nov-2015
• Completion Date: 25-Nov-2015
• Ref Project: SIST EN 6034:2016 - Aerospace series - Carbon fibre reinforced plastics - Test method - Determination of interlaminar fracture toughness energy - Mode II - GIIC

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 6034:2016
01-februar-2016
$HURQDYWLND=RJOMLNRYLPLYODNQLRMDþHQLSROLPHUQLPDWHULDOL3UHVNXVQDPHWRGD
8JRWDYOMDQMHHQHUJLMHSULPHGSODVWQLORPQLåLODYRVWL1DþLQ,,*,,&
Aerospace series - Carbon fibre reinforced plastics - Test method - Determination of
interlaminar fracture toughness energy - Mode II - GIIC
Luft- und Raumfahrt - Kohlenstofffaserverstärkte Kunststoffe - Prüfverfahren -
Bestimmung der interlaminaren Energiefreisetzungsrate - Mode II - GIIC
Série aérospatiale - Matières plastiques renforcées de fibres de carbone - Méthode
d'essai - Détermination de l'énergie de ténacité en rupture interlaminaire - Mode II - GIIC
Ta slovenski standard je istoveten z: EN 6034:2015
ICS:
49.025.40 Guma in polimerni materiali Rubber and plastics
83.120 2MDþDQLSROLPHUL Reinforced plastics
SIST EN 6034:2016 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 6034:2016

---------------------- Page: 2 ----------------------

SIST EN 6034:2016


EN 6034
EUROPEAN STANDARD

NORME EUROPÉENNE

November 2015
EUROPÄISCHE NORM
ICS 49.025.40
English Version

Aerospace series - Carbon fibre reinforced plastics - Test
method - Determination of interlaminar fracture
toughness energy - Mode II - GIIC
Série aérospatiale - Matières plastiques renforcées de Luft- und Raumfahrt - Kohlenstofffaserverstärkte
fibres de carbone - Méthode d'essai - Détermination de Kunststoffe - Prüfverfahren - Bestimmung der
l'énergie de ténacité en rupture interlaminaire - Mode interlaminaren Energiefreisetzungsrate - Mode II - GIIC
II - GIIC
This European Standard was approved by CEN on 10 August 2013.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 6034:2015 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 6034:2016
EN 6034:2015 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Principle of the method . 5
5 Designation of the method . 5
6 Apparatus . 5
7 Test specimen . 5
8 Procedure. 6
9 Presentation of the results . 8
10 Test report .
...