Product Category Rules for ceramic sanitary appliances

This European Standard specifies sustainability requirements together with assessment methods and evaluation schemes for ceramic sanitary appliances, i.e. WC pans and WC suites in accordance with EN 997, urinals in accordance with EN 13407, wash basins in accordance with EN 14688, communal washing troughs in accordance with EN 14296 and bidets in accordance with EN 14528.
NOTE   This European Standard may be applicable to other ceramic sanitary appliances.

Keramische Sanitärausstattungsgegenstände - Beurteilung der Nachhaltigkeit

Dieses Dokument stellt die Produktkategorieregel (PCR, en: Product Category Rule) für keramische Sanitär-ausstattungsgegenstände nach EN 15804:2012+ A1:2013 (im Folgenden EN 15804 genannt) bereit.
Das Dokument gilt für keramische Sanitärausstattungsgegenstände aus Halbporzellan und Feinfeuerton-werkstoffen. Keramische Sanitärausstattungsgegenstände umfassen z. B. WC-Becken und WC-Anlagen nach EN 997, Urinale nach EN 13407, Waschbecken nach EN 14688, Reihenwaschanlagen nach EN 14296 und Sitzwaschbecken nach EN 14528.
ANMERKUNG   Dieses Dokument kann auf andere keramische Sanitärausstattungsgegenstände anwendbar sein.

Règles de définition des catégories de produits pour les appareils sanitaires

Le présent document fournit la Règle de catégorie de produits (PCR) pour Appareils sanitaires en céramique selon EN 15804:2012+ A1:2013 (le présent document sera nommé ci-dessous EN 15804).
Le document s’applique aux Appareils sanitaires en céramique fabriqués à partir de porcelaine vitrifiée (VC) et de grès fin (FFC). Les Appareils sanitaires en céramique sont par exemple des cuvettes de WC et des cuvettes à réservoir conformément à l’EN 997, des urinoirs muraux conformément à l’EN 13407, des lavabos conformément à l’EN 14688, des lavabos collectifs conformément à l’EN 14296 et des bidets conformément à l’EN 14528.
NOTE   Le présent document peut être applicable à d’autres appareils sanitaires en céramique.

Pravila za kategorije proizvodov za keramično sanitarno opremo

General Information

Status
Not Published
Publication Date
29-Nov-2020
Withdrawal Date
30-May-2021
Current Stage
4098 - Decision to abandon - Enquiry
Completion Date
18-Jun-2020

Relations

Buy Standard

Draft
prEN 16578:2019 - BARVE
English language
91 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-december-2019
Pravila za kategorije proizvodov za keramično sanitarno opremo
Product Category Rules for ceramic sanitary appliances
Produktkategorieregeln für keramische Sanitärausstattungsgegenstände
Appareils sanitaires en céramique - Évaluation du développement durable
Ta slovenski standard je istoveten z: prEN 16578
ICS:
91.140.70 Sanitarne naprave Sanitary installations
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

DRAFT
EUROPEAN STANDARD
NORME EUROPÉENNE
EUROPÄISCHE NORM
August 2019
ICS 91.140.70 Will supersede EN 16578:2016
English Version
Product Category Rules for ceramic sanitary appliances
Appareils sanitaires en céramique - Évaluation du Keramische Sanitärausstattungsgegenstände -
développement durable Beurteilung der Nachhaltigkeit
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 163.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 16578:2019 E
worldwide for CEN national Members.

Contents Page
European foreword . 5
Introduction . 6
1 Scope . 7
2 Normative references . 7
3 Terms and definitions . 7
4 Calculation Rules for the LCA and Requirements on the Project report (PCR Part A) . 11
4.1 Content, structure and accessibility of the project report . 11
4.2 General information in the project report . 11
4.3 Goal of the study . 11
4.4 Scope of the study . 11
4.4.1 Declared/Functional unit . 11
4.4.2 Declaration of construction product classes . 12
4.4.3 Product description . 13
4.4.4 Area of application of the construction product . 13
4.4.5 System boundaries . 13
4.4.6 Criteria for the exclusion of inputs and outputs . 23
5 Life Cycle Inventory Analysis . 23
5.1 Collecting data and calculation procedures . 23
5.2 Developing product level scenarios . 23
5.3 Selecting data/background data . 24
5.4 Data/Background data quality requirements . 25
5.5 Allocations . 26
5.5.1 General . 26
5.5.2 Co-product allocation . 26
5.5.3 Allocation of multi-input processes . 27
5.5.4 Allocation procedure for reuse, recycling and recovery . 27
5.5.5 Description of the allocation processes in the project report . 28
5.6 Description of the unit processes in the project report . 29
6 Life Cycle Inventory Analysis and Impact Assessment . 29
6.1 General . 29
6.2 Indicators for the Life Cycle Inventory Analysis . 29
6.3 Indicators for Impact Assessment . 32
7 Life cycle interpretation . 33
8 Documentation of additional information . 33
8.1 Laboratory results and scenario-related information . 33
8.2 Documentation for calculating the Reference Service Life (RSL) . 34
9 Requirements on the EPD for Sanitary ceramics (PCR Part B) . 34
9.1 General . 34
9.2 Product-group-specific LCA calculation rules . 35
9.2.1 General . 35
9.2.2 Explanation on the LCA calculation of ceramic sanitary appl. for modules A1 and A3 . 35
9.2.3 Product specific LCA calculation rules for Modules A4 to D . 35
10 Chapter “1. General Information”. 42
11 Chapter “2. Product” . 42
11.1 Product description . 42
11.2 Application . 43
11.3 Technical Data . 43
11.4 Placing on the market/Application rules. 43
11.5 Delivery status . 45
11.6 Base materials/Ancillary materials . 45
11.7 Manufacture. 46
11.8 Environment and health during manufacturing . 48
11.9 Product processing/Installation . 48
11.10 Packaging . 48
11.11 Condition of use . 48
11.12 Environment and health during use . 49
11.13 Reference service life . 49
11.14 Extraordinary effects. 49
11.15 Re-use phase . 50
11.16 Disposal . 50
11.17 Further information . 50
12 Chapter “3. LCA: Calculation rules” . 50
12.1 Declared Unit . 50
12.2 System boundary . 50
12.3 Estimates and assumptions . 53
12.4 Cut-off criteria . 53
12.5 Background data . 53
12.6 Data quality . 53
12.7 Period under review . 54
12.8 Allocation . 54
12.9 Comparability . 54
13 Chapter “4. LCA: Scenarios and additional technical information” . 54
14 Chapter “5. Results of the LCA” . 59
15 Chapter “6. LCA Interpretation” . 68
16 Chapter “7. Requisite evidence” . 71
17 Chapter “8. References” . 72
18 Chapter “9. Product Rating” . 73
18.1 General .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.