iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 1515-3:2005

(Main)

Flanges and their joints - Bolting - Part 3: Classification of bolt materials for steel flanges, class designated

Flanges and their joints - Bolting - Part 3: Classification of bolt materials for steel flanges, class designated

This European Standard covers the classification of bolt materials used in combination with steel flanges ac-cording to EN 1759-1 (Class designated).
Bolt materials are listed in EN 1515-1; flange material groups are listed in EN 1759-1.

Flansche und ihre Verbindungen - Schrauben und Muttern - Teil 3: Klassifizierung von Schraubenwerkstoffen für Stahlflansches, nach Class bezeichnet

Diese Europäische Norm behandelt die Klassifizierung von Schraubenwerkstoffen, die in Kombination mit
Stahlflanschen nach EN 1759-1 (nach Class bezeichnet) verwendet werden.
Schraubenwerkstoffe sind in EN 1515-1 aufgeführt, Flansch-Werkstoffgruppen sind in EN 1759-1 aufgeführt.

Brides et leur assemblages - Boulonnerie - Partie 3: Classification de matériaux de boulonnerie pour brides en acier, désignées Class

Le présent document traite de la classification et de la combinaison des matériaux de boulonnerie avec les
brides en acier conformément à l�EN 1759-1 (désignées Class).
Les matériaux de boulonnerie et les groupes de matériaux des brides sont répertoriés respectivement dans
l�EN 1515-1 et l�EN 1759-1.

Prirobnice in prirobnični spoji - Vijaki in matice - 3. del: Razvrstitev materialov vijakov in matic za jeklene prirobnice z oznako Class

General Information

Status
Published
Publication Date
27-Sep-2005
Withdrawal Date
30-Mar-2006
ICS
21.060.10 - Bolts, screws, studs
23.040.60 - Flanges, couplings and joints
Technical Committee
CEN/TC 74 - Flanges and their joints
Drafting Committee
CEN/TC 74/WG 9 - Bolting
Current Stage
9060 - Closure of 2 Year Review Enquiry - Review Enquiry
Start Date
04-Mar-2022
Completion Date
04-Mar-2022
Directive
97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
Mandate
M/071 - Mandate to CEN for standardization in the field of Pressure equipment
Ref Project
SIST EN 1515-3:2006 - Flanges and their joints - Bolting - Part 3: Classification of bolt materials for steel flanges, class designated

Buy Standard

EN 1515-3:2006EN 1515-3:2006
PreviousNext
Standard
EN 1515-3:2006
English language
7 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 1515-3:2006
01-marec-2006
3ULUREQLFHLQSULUREQLþQLVSRML9LMDþQH]YH]HGHO5D]YUVWLWHYPDWHULDORY
YLMDNRYLQPDWLF]DMHNOHQHSULUREQLFH]R]QDNR&ODVV
Flanges and their joints - Bolting - Part 3: Classification of bolt materials for steel flanges,
class designated
Flansche und ihre Verbindungen - Schrauben und Muttern - Teil 3: Klassifizierung von
Schraubenwerkstoffen für Stahlflansches, nach Class bezeichnet
Brides et leur assemblages - Boulonnerie - Partie 3: Classification de matériaux de
boulonnerie pour brides en acier, désignées Class
Ta slovenski standard je istoveten z: EN 1515-3:2005
ICS:
21.060.10 Sorniki, vijaki, stebelni vijaki Bolts, screws, studs
23.040.60 Prirobnice, oglavki in spojni Flanges, couplings and joints
elementi
SIST EN 1515-3:2006 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 1515-3:2006

---------------------- Page: 2 ----------------------

SIST EN 1515-3:2006
EUROPEAN STANDARD
EN 1515-3
NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2005
ICS 21.060.10; 23.040.60

English Version
Flanges and their joints - Bolting - Part 3: Classification of bolt
materials for steel flanges, class designated
Brides et leur assemblages - Boulonnerie - Partie 3: Flansche und ihre Verbindungen - Schrauben und Muttern -
Classification de matériaux de boulonnerie pour brides en Teil 3: Klassifizierung von Schraubenwerkstoffen für
acier, désignées Class Stahlflansches, nach Class bezeichnet
This European Standard was approved by CEN on 8 August 2005.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 1515-3:2005: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 1515-3:2006
EN 1515-3:2005 (E)
Contents Page
Foreword .3
1 Scope .4
2 Normative references .4
3 Classification of bolt materials .4
Annex A (informative) Basic information.6
Bibliography.7

2

---------------------- Page: 4 ----------------------

SIST EN 1515-3:2006
EN 1515-3:2005 (E)
Foreword
This European Standard (EN 1515-3:2005) has been prepared by Technical Committee CEN/TC 74 “Flanges
and their joints”, the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by March 2006, and conflicting national standards shall be withdrawn at
the latest by March 2006.
EN 1515 "Flanges and their joints – Bolting" consists of three Parts:
 Part 1: Selection of bolting;
 Part 2: Classification of bolt materials for steel flanges, PN designated;
 Part 3: Classification of bolt materials for steel flanges, Class designated.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Den-
mark, Estonia, Finland, France, Germa
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 1515-4:2021/AC:2022(Corrigendum)
Flanges and their joints - Bolting - Part 4: Selection of bolting for equipment subject to the Pressure Equipment Directive 2014/68/EU
SIST EN 1515-4:2021/AC:2022

This document is applicable to the selection of bolting for flanged joints on equipment subject to the Pressure Equipment Directive 2014/68/EU.
It specifies standards and additional requirements for dimensions, material properties and technical conditions of delivery for bolting.
NOTE 1   Washers are not within the scope of this document.
The selection is based on commonly used bolting. It covers common temperature ranges of the general service of flanges.
When selecting bolting according to this document it is essential to take into account environmental conditions and other parameters including type of fluids, corrosion hazards, sour service, low temperature brittle failure and relaxation at elevated temperatures.
The purpose of this document is to provide a selection of most commonly used bolting types and bolting material combinations.
It is not the intention to specify all possible applications but to give guidance on the most common applications. For example, application limits for material in the creep range are not explicitly covered in this document. Where material standard provides mechanical properties for the creep range respective reference is made in Table 3.
NOTE 2   Special services and ambient conditions may require the application of coatings. It is the purchaser’s option to decide on this. Depending on the coating used, a verification of the temperature ranges given in Table 3 and Table 4 may be required.
NOTE 3   In Annex B there are bolting types and bolting material combinations according to commonly used national standards other than those listed in Table 2, Table 3 and Table 4.

  • Corrigendum
    2 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1515-4:2021(Main)
Flanges and their joints - Bolting - Part 4: Selection of bolting for equipment subject to the Pressure Equipment Directive 2014/68/EU
SIST EN 1515-4:2021

This document is applicable to the selection of bolting for flanged joints on equipment subject to the Pressure Equipment Directive 2014/68/EU.
It specifies standards and additional requirements for dimensions, material properties and technical conditions of delivery for bolting.
NOTE 1   Washers are not within the scope of this document.
The selection is based on commonly used bolting. It covers common temperature ranges of the general service of flanges.
When selecting bolting according to this document it is essential to take into account environmental conditions and other parameters including type of fluids, corrosion hazards, sour service, low temperature brittle failure and relaxation at elevated temperatures.
The purpose of this document is to provide a selection of most commonly used bolting types and bolting material combinations.
It is not the intention to specify all possible applications but to give guidance on the most common applications. For example, application limits for material in the creep range are not explicitly covered in this document. Where material standard provides mechanical properties for the creep range respective reference is made in Table 3.
NOTE 2   Special services and ambient conditions may require the application of coatings. It is the purchaser’s option to decide on this. Depending on the coating used, a verification of the temperature ranges given in Table 3 and Table 4 may be required.
NOTE 3   In Annex B there are bolting types and bolting material combinations according to commonly used national standards other than those listed in Table 2, Table 3 and Table 4.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1515-2:2001(Main)
Flanges and their joints - Bolting - Part 2: Classification of bolt materials for steel flanges, PN designated
SIST EN 1515-2:2002

This European Standard covers the classification of bolt materials combination with the flange material groups of steel flanges prEN 1092-1 (PN-designated).
Bolt materials are listed in EN 1515-1, flange material groups are listed in prEN 1092-1.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1515-1:1999(Main)
Flanges and their joints - Bolting - Part 1: Selection of bolting
SIST EN 1515-1:2001

This European Standard is applicable to the selection of bolting for PN designated flanges in accordance with EN 1092 series and Class designated flanges in accordance with EN 1759 series. It specifies standards for dimensions, materials and technical conditions of delivery for bolts, stud bolts and nuts. The bolting of this standard is selected for the use together with the flanges EN 1092 series and EN 1759 series but not for general purpose. The selection of the materials is based on commonly used materials. It covers all pressure and temperature ranges of the general service of standard flanges.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1515-4:2021/AC:2022(Corrigendum)
Flanges and their joints - Bolting - Part 4: Selection of bolting for equipment subject to the Pressure Equipment Directive 2014/68/EU
SIST EN 1515-4:2021/AC:2022

This document is applicable to the selection of bolting for flanged joints on equipment subject to the Pressure Equipment Directive 2014/68/EU.
It specifies standards and additional requirements for dimensions, material properties and technical conditions of delivery for bolting.
NOTE 1   Washers are not within the scope of this document.
The selection is based on commonly used bolting. It covers common temperature ranges of the general service of flanges.
When selecting bolting according to this document it is essential to take into account environmental conditions and other parameters including type of fluids, corrosion hazards, sour service, low temperature brittle failure and relaxation at elevated temperatures.
The purpose of this document is to provide a selection of most commonly used bolting types and bolting material combinations.
It is not the intention to specify all possible applications but to give guidance on the most common applications. For example, application limits for material in the creep range are not explicitly covered in this document. Where material standard provides mechanical properties for the creep range respective reference is made in Table 3.
NOTE 2   Special services and ambient conditions may require the application of coatings. It is the purchaser’s option to decide on this. Depending on the coating used, a verification of the temperature ranges given in Table 3 and Table 4 may be required.
NOTE 3   In Annex B there are bolting types and bolting material combinations according to commonly used national standards other than those listed in Table 2, Table 3 and Table 4.

  • Corrigendum
    2 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1515-4:2021(Main)
Flanges and their joints - Bolting - Part 4: Selection of bolting for equipment subject to the Pressure Equipment Directive 2014/68/EU
SIST EN 1515-4:2021

This document is applicable to the selection of bolting for flanged joints on equipment subject to the Pressure Equipment Directive 2014/68/EU.
It specifies standards and additional requirements for dimensions, material properties and technical conditions of delivery for bolting.
NOTE 1   Washers are not within the scope of this document.
The selection is based on commonly used bolting. It covers common temperature ranges of the general service of flanges.
When selecting bolting according to this document it is essential to take into account environmental conditions and other parameters including type of fluids, corrosion hazards, sour service, low temperature brittle failure and relaxation at elevated temperatures.
The purpose of this document is to provide a selection of most commonly used bolting types and bolting material combinations.
It is not the intention to specify all possible applications but to give guidance on the most common applications. For example, application limits for material in the creep range are not explicitly covered in this document. Where material standard provides mechanical properties for the creep range respective reference is made in Table 3.
NOTE 2   Special services and ambient conditions may require the application of coatings. It is the purchaser’s option to decide on this. Depending on the coating used, a verification of the temperature ranges given in Table 3 and Table 4 may be required.
NOTE 3   In Annex B there are bolting types and bolting material combinations according to commonly used national standards other than those listed in Table 2, Table 3 and Table 4.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1515-2:2001(Main)
Flanges and their joints - Bolting - Part 2: Classification of bolt materials for steel flanges, PN designated
SIST EN 1515-2:2002

This European Standard covers the classification of bolt materials combination with the flange material groups of steel flanges prEN 1092-1 (PN-designated).
Bolt materials are listed in EN 1515-1, flange material groups are listed in prEN 1092-1.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1515-1:1999(Main)
Flanges and their joints - Bolting - Part 1: Selection of bolting
SIST EN 1515-1:2001

This European Standard is applicable to the selection of bolting for PN designated flanges in accordance with EN 1092 series and Class designated flanges in accordance with EN 1759 series. It specifies standards for dimensions, materials and technical conditions of delivery for bolts, stud bolts and nuts. The bolting of this standard is selected for the use together with the flanges EN 1092 series and EN 1759 series but not for general purpose. The selection of the materials is based on commonly used materials. It covers all pressure and temperature ranges of the general service of standard flanges.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 8362-2:2024(Main)
Injection containers and accessories - Part 2: Closures for injection vials (ISO 8362-2:2024)
SIST EN ISO 8362-2:2024

This document specifies the shape, dimensions, material, performance requirements and labelling of closures for injection vials covered by ISO 8362-1 and ISO 8362-4.
The dimensional requirements are not applicable to barrier-coated closures.
Closures specified in this document are intended for single use only.
NOTE            The potency, purity, stability and safety of a medicinal product during its manufacture and storage can strongly be affected by the nature and performance of the primary packaging.

  • Draft
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17015-1:2024(Main)
Electronic Public Procurement - Catalogue - Part 1: Choreographies
kSIST FprEN 17015-1:2024

The purpose of this deliverable is to specify and describe choreographies for exchanging an electronic product catalogue (“catalogues”) as part of the business processes in the pre-award and post-award area, so that catalogues can serve as a basis for placing orders as well as evaluating tenders. The key aspects covered by this choreography specification are:
-   processes for submitting catalogues from the selling to the buying side;
-   processes for submitting catalogue-related data as part of a tendering process;
-   processes integrating sell-side procurement systems.
This document does not apply to the transactions used in the specified choreographies. These transactions are specified in EN 17015 2. The relationship between the choreographies and the transaction is described in Clause 8.
The identifier of this choreographies document is EN 17015 1:2024.
How to claim compliance to this choreography is specified in 6.2.3.

  • Draft
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day