EN ISO 12474:2010

Hexagon socket head cap screws with metric fine pitch thread (ISO 12474:2010)

ISO 12474:2010 specifies the characteristics of hexagon socket head cap screws with metric fine pitch thread with nominal thread diameters from 8 mm up to 36 mm and product grade A.

Zylinderschrauben mit Innensechskant mit Metrischem Feingewinde (ISO 12474:2010)

Diese Internationale Norm legt die Eigenschaften von Zylinderschrauben mit Innensechskant mit Metrischem Feingewinde, mit Gewindenenndurchmessern d von 8 mm bis 36 mm und mit Produktklasse A fest.
Angaben über die ungefähren Schraubengewichte enthält Anhang A.

Vis à tête cylindrique à six pans creux à pas fin (ISO 12474:2010)

L'ISO 12474:2010 spécifie les caractéristiques des vis à tête cylindrique à six pans creux, à pas fin, de diamètre nominal de filetage, d, de 8 mm à 36 mm inclus et de grade A.

Vijaki z valjasto glavo z notranjim šesterokotnikom in z metrskim drobnim navojem (ISO 12474:2010)

Ta mednarodni standard določa značilnosti vijakov z valjasto glavo z notranjim šesterokotnikom in z metrskim drobnim navojem z nominalnimi premeri navoja, d, od 8 mm do 36 mm in produktno oceno A. Za približne mase vijakov glej dodatek A.

General Information

• Status: Published
• Publication Date: 30-Sep-2010
• Withdrawal Date: 29-Apr-2011
• ICS: 21.060.10 - Bolts, screws, studs
• Technical Committee: CEN/TC 185 - Threaded and nonthreaded mechanical fasteners and accessories
• Drafting Committee: CEN/TC 185 - Threaded and nonthreaded mechanical fasteners and accessories
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 01-Oct-2010
• Due Date: 07-Apr-2011
• Completion Date: 01-Oct-2010
• Ref Project: SIST EN ISO 12474:2012 - Hexagon socket head cap screws with metric fine pitch thread (ISO 12474:2010)

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 12474:2012
01-januar-2012
Vijaki z valjasto glavo z notranjim šesterokotnikom in z metrskim drobnim
navojem (ISO 12474:2010)
Hexagon socket head cap screws with metric fine pitch thread (ISO 12474:2010)
Zylinderschrauben mit Innensechskant mit Metrischem Feingewinde (ISO 12474:2010)
Vis à tête cylindrique à six pans creux à pas fin (ISO 12474:2010)
Ta slovenski standard je istoveten z: EN ISO 12474:2010
ICS:
21.040.10 Metrski navoji Metric screw threads
21.060.10 Sorniki, vijaki, stebelni vijaki Bolts, screws, studs
SIST EN ISO 12474:2012 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 12474:2012

---------------------- Page: 2 ----------------------

SIST EN ISO 12474:2012


EUROPEAN STANDARD
EN ISO 12474

NORME EUROPÉENNE

EUROPÄISCHE NORM
October 2010
ICS 21.060.10
English Version
Hexagon socket head cap screws with metric fine pitch thread
(ISO 12474:2010)
Vis à tête cylindrique à six pans creux à pas fin (ISO Zylinderschrauben mit Innensechskant mit Metrischem
12474:2010) Feingewinde (ISO 12474:2010)
This European Standard was approved by CEN on 30 September 2010.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2010 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 12474:2010: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 12474:2012
EN ISO 12474:2010 (E)
Contents Page
Foreword .3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 12474:2012
EN ISO 12474:2010 (E)
Foreword
The text of ISO 12474:2010 has been prepared by Technical Committee ISO/TC 2 “Fasteners” of the
International Organization for Standardization (ISO) and has been taken over as EN ISO 12474:2010 by
Technical Committee CEN/TC 185 “Fasteners” the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by April 2011, and conflicting national standards shall be withdrawn at the
latest by April 2011.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 12474:2010 has been approved by CEN as a EN ISO 12474:2010 without any modification.


3

---------------------- Page: 5 ----------------------

SIST EN ISO 12474:2012

---------------------- Page: 6 ----------------------

SIST EN ISO 12474:2012

INTERNATIONAL ISO
STANDARD 12474
First edition
2010-10-01


Hexagon socket head cap screws with
metric fine pitch thread
Vis à tête cylindrique à six pans creux à pas fin




Reference number
ISO 12474:2010(E)
©
ISO 2010

---------------------- Page: 7 ----------------------

SIST EN ISO 12474:2012
ISO 12474:2010(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file m
...