prEN 3155-044

Aerospace series - Electrical contacts used in elements of connection - Part 044: Contacts, electrical, male 044, type A, double crimping, class T - Product standard

This document specifies the required characteristics and tests applicable to electrical contacts, male 044, type A, double crimping, class T, used in elements of connection according to EN 3155 002.
It is be used together with EN 3155 001.
The associated female contact is specified in EN 3155 045.

Luft- und Raumfahrt - Elektrische Kontakte zur Verwendung in Verbindungselementen - Teil 044: Elektrischer Stiftkontakt 044, Typ A, doppelt gecrimpt, Klasse T - Produktnorm

Série aérospatiale - Contacts électriques utilisés dans les organes de connexion - Partie 044 : Contacts électriques, mâles 044, type A, double sertissage, classe T - Norme de produit

Le présent document spécifie les caractéristiques requises, les essais et l'outillage applicables aux contacts électriques mâles 044, de type A, double sertissage, de classe T, utilisés dans les organes de connexion suivant l’EN 3155 002.
Il est utilisé conjointement avec l’EN 3155 001.
Les contacts femelles associés sont spécifiés dans l’EN 3155 045.

Aeronavtika - Električni kontakti za uporabo v veznih elementih - 044. del: Kontakti, električni, moški 044, tip A, dvojno zaključeni, razred T - Standard za proizvod

General Information

• Status: Not Published
• Publication Date: 18-May-2025
• ICS: 49.060 - Aerospace electric equipment and systems
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 2/S 3 - Elements of Connection (Connectors, Contacts, rear accessories, crimping tools
• Current Stage: 4060 - Closure of enquiry - Enquiry
• Start Date: 15-Feb-2024
• Completion Date: 15-Feb-2024
• Ref Project: oSIST prEN 3155-044:2024 - Aerospace series - Electrical contacts used in elements of connection - Part 044: Contacts, electrical, male 044, type A, double crimping, class T - Product standard

Relations

• Revises: EN 3155-044:2019 - Aerospace series - Electrical contacts used in elements of connection - Part 044: Contacts, electrical, male 044, type A, double crimping, class T - Product standard
• Effective Date: 16-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
01-maj-2024
Aeronavtika - Električni kontakti za uporabo v veznih elementih - 044. del:
Kontakti, električni, moški 044, tip A, dvojno zaključeni, razred T - Standard za
proizvod
Aerospace series - Electrical contacts used in elements of connection - Part 044:
Contacts, electrical, male 044, type A, double crimping, class T - Product standard
Luft- und Raumfahrt - Elektrische Kontakte zur Verwendung in Verbindungselementen -
Teil 044: Elektrischer Stiftkontakt 044, Typ A, doppelt gecrimpt, Klasse T - Produktnorm
Série aérospatiale - Contacts électriques utilisés dans les organes de connexion - Partie
044 : Contacts électriques, mâles 044, type A, double sertissage, classe T - Norme de
produit
Ta slovenski standard je istoveten z: prEN 3155-044
ICS:
49.060 Letalska in vesoljska Aerospace electric
električna oprema in sistemi equipment and systems
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

DRAFT
EUROPEAN STANDARD
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2023
ICS 49.060 Will supersede EN 3155-044:2019
English Version
Aerospace series - Electrical contacts used in elements of
connection - Part 044: Contacts, electrical, male 044, type
A, double crimping, class T - Product standard
Luft- und Raumfahrt - Elektrische Kontakte zur
Verwendung in Verbindungselementen - Teil 044:
Elektrischer Stiftkontakt 044, Typ A, doppelt gecrimpt,
Klasse T - Produktnorm
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee ASD-
STAN.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 3155-044:2023 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Required characteristics . 5
4.1 Dimensions and mass . 5
4.2 Marking by colour code . 7
4.3 Material, protective plating . 7
4.4 Permissible cables . 7
4.5 Cable stripping . 7
4.6 Tooling . 8
4.7 Tests . 8
5 Designation . 12
6 Marking . 12
7 Technical specification . 12
Bibliography . 13

European foreword
This document (prEN 3155-044:2023) has been prepared by the Aerospace and Defence Industries
Association of Europe — Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this document has
received the approval of the National Associations and the Official Services of the member countries of
ASD-STAN, prior to its presentation to CEN.
This document is currently submitted to the CEN Enquiry.
This document will supersede EN 3155-044:2019.
EN 3155-044:2019:
— normative references updated;
— figure of colour identification bands corrected in Table 2;
— document editorially revised.
Any feedback and questions on this document should be directed to the users’ national standards body.
A complete listing of these bodies can be found on the CEN website.
1 Scope
This document specifies the required characteristics and tests applicable to electrical contacts, male 044,
type A, double crimping, class T, used in elements of connection according to EN 3155-002.
It is be used together with EN 3155-001.
The associated female contact is specified in EN 3155-045.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
EN 2083, Aerospace series - Copper and copper alloys conductors for electrical cables - Product standard
EN 2591 (all parts), Aerospace series — Elements of electrical and optical connection — Test methods
EN 2997-001, Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or
non fire-resistant, operating temperatures - 65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak -
Part 001: Technical specification
EN 3155-001, Aerospace series - Electrical contacts used in elements of connection - Part 001: Technical
Specification
EN 3155-002, Aerospace series - Electrical contacts used in elements of connection - Part 002: List and
utilization of contacts
EN 4434, Aerospace series - Copper or copper al
...