EN 13451-4:2014
(Main)Swimming pool equipment - Part 4: Additional specific safety requirements and test methods for starting platforms
Swimming pool equipment - Part 4: Additional specific safety requirements and test methods for starting platforms
This European Standard specifies safety requirements for starting platforms in addition to the general safety requirements of EN 13451 1:2011 and should be read in conjunction with it.
The requirements of this specific standard take priority over those in EN 13451-1:2011.
This European Standard is applicable to manufactured starting platforms for use in competition and training in classified swimming pools as specified in EN 15288-1 and EN 15288-2.
Schwimmbadgeräte - Teil 4: Zusätzliche besondere sicherheitstechnische Anforderungen und Prüfverfahren für Startblöcke
Dieser Teil von EN 13451 legt sicherheitstechnische Anforderungen für Startblöcke zusätzlich zu den allgemeinen sicherheitstechnischen Anforderungen nach EN 13451-1:2011 fest und sollte gemeinsam mit diesem Teil der Norm gelesen werden.
Die Anforderungen dieser speziellen Norm haben Vorrang gegenüber EN 13451-1:2011.
Dieser Teil von EN 13451 gilt für Startblöcke, die zum Gebrauch in Wettkämpfen und beim Training in klassifizierten Schwimmbädern nach den Festlegungen in EN 15288-1 und EN 15288-2.
Equipement de piscine - Partie 4: Exigences de sécurité et méthodes d'essai complémentaires spécifiques aux plots départ
La présente Norme européenne spécifie des exigences de sécurité pour les plots départ et vient compléter les exigences générales de sécurité de l'EN 13451 1:2011. Il convient de la lire conjointement avec celle-ci.
Les exigences de la présente norme spécifique prévalent sur celles de l'EN 13451-1:2011.
La présente Norme européenne s'applique aux plots départ préfabriqués utilisés pour la compétition et l'entraînement dans des piscines classées, ainsi que spécifié dans l'EN 15288-1 et l'EN 15288-2.
Oprema za plavalne bazene - 4. del: Dodatne posebne varnostne zahteve in preskusne metode za startne bloke
Ta del standard EN 13451 določa varnostne zahteve startne bloke poleg splošnih varnostnih zahtev standarda EN 13451-1:2011 in naj bi se ga bralo skupaj z njim.
Zahteve tega specifičnega standarda imajo prednost pred zahtevami v standardu EN 13451-1:2011.
Ta del standarda EN 13451 velja za izdelane startne bloke za uporabo na tekmovanjih in treningih v klasificiranih plavalnih bazenih, kot določata standarda EN 15288-1 in EN 15288-2.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Oprema za plavalne bazene - 4. del: Dodatne posebne varnostne zahteve in preskusne metode za startne blokeSchwimmbadgeräte - Teil 4: Zusätzliche besondere sicherheitstechnische Anforderungen und Prüfverfahren für StartblöckeEquipement de piscine - Partie 4 : Exigences de sécurité et méthodes d'essai complémentaires spécifiques aux plots départSwimming pool equipment - Part 4: Additional specific safety requirements and test methods for starting platforms97.220.10Športni objektiSports facilitiesICS:Ta slovenski standard je istoveten z:EN 13451-4:2014SIST EN 13451-4:2014en,fr,de01-december-2014SIST EN 13451-4:2014SLOVENSKI
STANDARDSIST EN 13451-4:20021DGRPHãþD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 13451-4
October 2014 ICS 97.220.10 Supersedes EN 13451-4:2001English Version
Swimming pool equipment - Part 4: Additional specific safety requirements and test methods for starting platforms
Equipement de piscine - Partie 4: Exigences de sécurité et méthodes d'essai complémentaires spécifiques aux plots départ
Schwimmbadgeräte - Teil 4: Zusätzliche besondere sicherheitstechnische Anforderungen und Prüfverfahren für Startblöcke This European Standard was approved by CEN on 30 August 2014.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2014 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13451-4:2014 ESIST EN 13451-4:2014
Page Foreword .3 1 Scope .4 2 Normative references .4 3 Terms and definitions .4 4 Safety requirements .4 4.1 Design and manufacture .4 4.2 Structural integrity .6 4.3 Slip resistance .7 5 Test methods .7 6 Manufacturer’s instructions .7 Bibliography .8
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.