EN ISO 22435:2007/A1:2012
(Amendment)Gas cylinders - Cylinder valves with integrated pressure regulators - Specification and type testing (ISO 22435:2007/Amd 1:2012)
Gas cylinders - Cylinder valves with integrated pressure regulators - Specification and type testing (ISO 22435:2007/Amd 1:2012)
2012-06-19 EMA: Draft for // vote received in ISO/CS (see 2012-06-15 notification in dataservice).
2011-02-21 EMA: // ENQ draft received in ISO/CS (see notification from 2011-02-18 in dataservice).
Gasflaschen - Flaschenventile mit integriertem Druckminderer - Allgemeine Anforderungen und Typprüfung (ISO 22435:2007/Amd 1:2012)
Bouteilles à gaz - Robinets de bouteilles avec détendeur intégré - Spécifications et essais de type (ISO 22435:2007/Amd 1:2012)
Plinske jeklenke - Ventili za jeklenke z vgrajenim regulatorjem tlaka - Specifikacija in preskus tipa - Dopolnilo A1 (ISO 22435:2007/Amd 1:2012)
Ta mednarodni standard se uporablja za ventile za jeklenke z vgrajenim regulatorjem tlaka (VIPR), ki so namenjeni vgradnji v plinske jeklenke, ki prenašajo stisnjene, utekočinjene ali raztopljene pline. Ta mednarodni standard ni namenjen uporabi v medicinske namene (glej ISO 10524-3). Poleg tega ta mednarodni standard ne zajema dodatnih posebnih zahtev za ventile, opremljene z varnostnimi ventili in razpočnimi ploščami (glej EN 14513), ter za ventile, opremljene s preostalimi tlačnimi ventili (glej ISO 15996).
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-november-2013
Plinske jeklenke - Ventili za jeklenke z vgrajenim regulatorjem tlaka - Specifikacija
in preskus tipa - Dopolnilo A1 (ISO 22435:2007/Amd 1:2012)
Gas cylinders - Cylinder valves with integrated pressure regulators - Specification and
type testing (ISO 22435:2007/Amd 1:2012)
Gasflaschen - Flaschenventile mit integriertem Druckminderer - Allgemeine
Anforderungen und Typprüfung (ISO 22435:2007/Amd 1:2012)
Bouteilles à gaz - Robinets de bouteilles avec détendeur intégré - Spécifications et
essais de type (ISO 22435:2007/Amd 1:2012)
Ta slovenski standard je istoveten z: EN ISO 22435:2007/A1:2012
ICS:
23.020.30 7ODþQHSRVRGHSOLQVNH Pressure vessels, gas
MHNOHQNH cylinders
23.060.40 7ODþQLUHJXODWRUML Pressure regulators
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN ISO 22435:2007/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2012
ICS 23.020.30
English Version
Gas cylinders - Cylinder valves with integrated pressure
regulators - Specification and type testing (ISO 22435:2007/Amd
1:2012)
Bouteilles à gaz - Robinets de bouteilles avec détendeur Gasflaschen - Flaschenventile mit integriertem
intégré - Spécifications et essais de type (ISO Druckminderer - Allgemeine Anforderungen und
22435:2007/Amd 1:2012) Typprüfung (ISO 22435:2007/Amd 1:2012)
This amendment A1 modifies the European Standard EN ISO 22435:2007; it was approved by CEN on 30 November 2012.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2012 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 22435:2007/A1:2012: E
worldwide for CEN national Members.
Contents Page
Foreword .3
Foreword
This document (EN ISO 22435:2007/A1:2012) has been prepared by Technical Committee ISO/TC 58 "Gas
cylinders" in collaboration with Technical Committee CEN/TC 23 “Transportable gas cylinders” the secretariat
of which is held by BSI.
This Amendment to the European Standard EN ISO 22435:2007 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by June 2013, and
conflicting national standards shall be withdrawn at the latest by June 2013.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organisations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 22435:2007/Amd 1:2012 has been approved by CEN as a EN ISO 22435:2007/A1:2012
without any modification.
INTERNATIONAL ISO
STANDARD 22435
First edition
2007-09-01
AMENDMENT 1
2012-12-01
Gas cylinders — Cylinder valves with
integrated pressure regulators —
Specification and type testing —
Amendment 1
Bouteilles à gaz — Robinets de bouteilles avec détendeur intégré —
Spécifications et essais de type — Amendement 1
Reference number
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.