prEN 1288-5 rev

Glass in building - Determination of the bending strength of glass - Part 5: Coaxial double-ring test on flat specimens with small test surface areas (ISO/DIS 1288-5:2014)

Verre dans la construction - Détermination de la résistance du verre à la flexion - Partie 5: Essais avec doubles anneaux concentriques sur éprouvettes planes, avec de petites surfaces de sollicitation

Glas im Bauwesen - Bestimmung der Biegefestigkeit von Glas - Teil 5: Doppelring-Biegeversuch an plattenförmigen Proben mit kleinen Prüfflächen (ISO/DIS 1288-5:2014)

Diese Internationale Norm legt ein Verfahren zur vergleichenden Bestimmung der Biegefestigkeit von Glas im Bauwesen unter Ausschluss von Randeinflüssen fest.
ANMERKUNG   Siehe ISO 1288 1, 5.1.4, zur Erklärung, warum dieses Prüfverfahren nur für vergleichende Festig-keitsprüfungen verschiedener Glasarten, aber nicht zur Bestimmung der Biegefestigkeit für Bemessungen verwendet werden sollte.
Die Grenzen der Anwendbarkeit dieser Norm sind in ISO 1288 1 beschrieben.
ISO 1288 1 sollte in Verbindung mit dieser Norm gelesen werden.
Diese Prüfung ist nicht auf Ornamentglas anwendbar.

Verre dans la construction - Détermination de la résistance du verre à la flexion - Partie 5: Essais avec doubles anneaux concentriques sur éprouvettes planes, avec de petites surfaces de sollicitation (ISO/DIS 1288-5:2014)

Steklo v gradbeništvu - Ugotavljanje upogibne trdnosti stekla - 5. del: Metoda soosnega dvojnega obroča na ravnem steklu z majhnimi površinami (ISO/DIS 1288-5:2014)

General Information

• Status: Not Published
• ICS: 81.040.20 - Glass in building
• Technical Committee: CEN/TC 129 - Glass in building
• Drafting Committee: CEN/TC 129 - Glass in building
• Current Stage: 4098 - Decision to abandon - Enquiry
• Completion Date: 11-Mar-2016
• Ref Project: oSIST prEN ISO 1288-5:2014 - Glass in building - Determination of the bending strength of glass - Part 5: Coaxial double-ring test on flat specimens with small test surface areas (ISO/DIS 1288-5:2014)

Relations

• Revises: EN 1288-5:2000 - Glass in building - Determination of the bending strength of glass - Part 5: Coaxial double ring test on flat specimens with small test surface areas
• Effective Date: 19-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN ISO 1288-5:2014
01-april-2014
6WHNORYVWDYEDK8JRWDYOMDQMHXSRJLEQHWUGQRVWLVWHNODGHO0HWRGDVRRVQHJD
GYRMQHJDREURþDQDUDYQHPVWHNOX]PDMKQLPLSRYUãLQDPL,62',6
Glass in building - Determination of the bending strength of glass - Part 5: Coaxial double
-ring test on flat specimens with small test surface areas (ISO/DIS 1288-5:2014)
Glas im Bauwesen - Bestimmung der Biegefestigkeit von Glas - Teil 5: Doppelring-
Biegeversuch an plattenförmigen Proben mit kleinen Prüfflächen (ISO/DIS 1288-5:2014)
Verre dans la construction - Détermination de la résistance du verre à la flexion - Partie
5: Essais avec doubles anneaux concentriques sur éprouvettes planes, avec de petites
surfaces de sollicitation (ISO/DIS 1288-5:2014)
Ta slovenski standard je istoveten z: prEN ISO 1288-5 rev
ICS:
81.040.20 Steklo v gradbeništvu Glass in building
oSIST prEN ISO 1288-5:2014 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 1288-5:2014

---------------------- Page: 2 ----------------------
oSIST prEN ISO 1288-5:2014
DRAFT INTERNATIONAL STANDARD
ISO/DIS 1288-5
ISO/TC 160/SC 2 Secretariat: ANSI
Voting begins on: Voting terminates on:
2014-01-09 2014-06-09
Glass in building — Determination of the bending strength
of glass —
Part 5:
Coaxial double-ring test on flat specimens with small test
surface areas
Verre dans la construction — Détermination de la résistance du verre à la flexion —
Partie 5: Essais avec doubles anneaux concentriques sur éprouvettes planes, avec de petites surfaces de
sollicitation
ICS: 81.040.20
ISO/CEN PARALLEL PROCESSING
This draft has been developed within the International Organization for
Standardization (ISO), and processed under the ISO lead mode of collaboration
as defined in the Vienna Agreement.
This draft is hereby submitted to the ISO member bodies and to the CEN member
bodies for a parallel five month enquiry.
Should this draft be accepted, a final draft, established on the basis of comments
received, will be submitted to a parallel two-month approval vote in ISO and
THIS DOCUMENT IS A DRAFT CIRCULATED
formal vote in CEN.
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
To expedite distribution, this document is circulated as received from the
IN ADDITION TO THEIR EVALUATION AS
committee secretariat. ISO Central Secretariat work of editing and text
BEING ACCEPTABLE FOR INDUSTRIAL,
composition will be undertaken at publication stage.
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 1288-5:2013(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
©
PROVIDE SUPPORTING DOCUMENTATION. ISO 2013

---------------------- Page: 3 ----------------------
oSIST prEN ISO 1288-5:2014
ISO/DIS 1288-5:2013(E)

Copyright notice
This ISO document is a Draft International Standard and is copyright-protected by ISO. Except as
permitted under the applicable laws of the user’s country, neither this ISO draft nor any extract
from it may be reproduced, stored in a retrieval system or transmitted in any form or by any means,
electronic, photocopying, recording or otherwise, without prior written permission being secured.
Requests for permission to reproduce should be addressed to either ISO at the address below or ISO’s
member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Reproduction may be subject to royalty payments or a licensing agreement.
Violators may be prosecuted.
ii © ISO 2013 – All rights reserved

---------------------- Page: 4 ----------------------
oSIST prEN ISO 1288-5:2014
FDIS 1288-5
Contents
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Symbols (and abbreviated terms) . 2
5 Principle of test method .
...