prEN 2995-006
(Main)Aerospace series - Circuit breakers, single-pole, temperature compensated, rated currents 1 A to 25 A - Part 006: 6,3 mm & 2,8 mm blade terminal with polarized signal contact - Product standard
Aerospace series - Circuit breakers, single-pole, temperature compensated, rated currents 1 A to 25 A - Part 006: 6,3 mm & 2,8 mm blade terminal with polarized signal contact - Product standard
This document specifies the characteristics of single-pole circuit breakers, temperature compensated with a rated current from 1 A to 25 A, used in aircraft on-board circuits at a temperature between -55 °C and 125 °C and at an altitude of 15 000 m max.
These circuit breakers are operated by a push-pull type single push button (actuator), with delayed action "trip-free" tripping with a polarized signal contact which is open when main contacts are closed, and inversely.
They will continue to function up to the short-circuit current.
Luft- und Raumfahrt - Schutzschalter, einpolig, temperaturkompensiert, Nennstroöme von 1 A bis 25 A - Teil 006: Flachsteckverbinder 6,3 mm & 2,8 mm mit polarisiertem signalkontakt - Produktnorm
No Scope available
Série aérospatiale - Disjoncteurs unipolaires compensés en température, intensités nominales 1 A à 25 A - Partie 006 : Borne à lames de 6,3 mm et 2,8 mm avec contact de signalisation polarisé - Norme de produit
Le présent document spécifie les caractéristiques des disjoncteurs unipolaires compensés en température à intensité nominale de 1 A à 25 A, utilisés dans les circuits embarqués des aéronefs à des températures comprises entre -55 °C et 125 °C et à une altitude de 15 000 m max.
Ces disjoncteurs sont commandés par un bouton‑poussoir unique (bouton de commande) de type « push-pull », à déclenchement libre temporisé, avec un contact de signalisation polarisé qui est ouvert lorsque les contacts principaux sont fermés, et inversement.
Leur fonctionnement est assuré jusqu’au courant de court-circuit.
Aeronavtika - Odklopniki, enopolni, temperaturno kompenzirani, za naznačene tokove od 1 A do 25 A - 006. del: Ploski spoji 6,3 mm & 2,8 mm s polariziranim signalnim kontaktom - Standard za proizvod
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN 2995-006:2020
01-julij-2020
Aeronavtika - Odklopniki, enopolni, temperaturno kompenzirani, za naznačene
tokove od 1 A do 25 A - 006. del: Ploski spoji 6,3 mm & 2,8 mm s polariziranim
signalnim kontaktom - Standard za proizvod
Aerospace series - Circuit breakers, single-pole, temperature compensated, rated
currents 1 A to 25 A - Part 006: 6,3 mm & 2,8 mm blade terminal with polarized signal
contact - Product standardLuft- und Raumfahrt - Schutzschalter, einpolig, temperaturkompensiert, Nennstroöme
von 1 A bis 25 A - Teil 006: Flachsteckverbinder 6,3 mm & 2,8 mm mit polarisiertem
signalkontakt - ProduktnormSérie aérospatiale - Disjoncteurs unipolaires compensés en températures, intensités
nominales 1 A à 25 A - Partie 006 : Raccordement par lame 6,3 mm & 2,8 mm aveccontact de signalisation polarisé - Norme de produit
Ta slovenski standard je istoveten z: prEN 2995-006
ICS:
29.120.50 Varovalke in druga Fuses and other overcurrent
nadtokovna zaščita protection devices
49.060 Letalska in vesoljska Aerospace electric
električna oprema in sistemi equipment and systems
oSIST prEN 2995-006:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------oSIST prEN 2995-006:2020
---------------------- Page: 2 ----------------------
oSIST prEN 2995-006:2020
DRAFT
EUROPEAN STANDARD
prEN 2995-006
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2020
ICS 49.060
English Version
Aerospace series - Circuit breakers, single-pole,
temperature compensated, rated currents 1 A to 25 A -
Part 006: 6,3 mm & 2,8 mm blade terminal with polarized
signal contact - Product standard
Série aérospatiale - Disjoncteurs unipolaires Luft- und Raumfahrt - Schutzschalter, einpolig,
compensés en températures, intensités nominales 1 A temperaturkompensiert, Nennstroöme von 1 A bis 25
à 25 A - Partie 006 : Raccordement par lame 6,3 mm & A - Teil 006: Flachsteckverbinder 6,3 mm & 2,8 mm mit
2,8 mm avec contact de signalisation polarisé - Norme polarisiertem signalkontakt - Produktnorm
de produitThis draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee ASD-
STAN.If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 2995-006:2020 E
worldwide for CEN national Members.---------------------- Page: 3 ----------------------
oSIST prEN 2995-006:2020
prEN 2995-006:2020 (E)
Contents Page
European foreword ............................................................................................................................................ 3
1 Scope .......................................................................................................................................................... 4
2 Normative references .......................................................................................................................... 4
3 Terms and definitions ......................................................................................................................... 4
4 Dimensions and mass .......................................................................................................................... 4
5 Characteristics ....................................................................................................................................... 8
6 Designation ........................................................................................................................................... 13
7 Rated current code ............................................................................................................................. 14
8 Delivery hardware codes ................................................................................................................. 14
9 Marking ................................................................................................................................................... 14
10 Technical specification ..................................................................................................................... 14
Bibliography ........................................................................................................................................................ 15
---------------------- Page: 4 ----------------------oSIST prEN 2995-006:2020
prEN 2995-006:2020 (E)
European foreword
This document (prEN 2995-006:2020) has been prepared by the Aerospace and Defence Industries
Association of Europe – Standardization (ASD-STAN).After enquiries and votes carried out in accordance with the rules of this Association, this Standard has
received the approval of the National Associations and the Official Services of the member countries of
ASD, prior to its presentation to CEN.This document is currently submitted to the CEN Enquiry.
---------------------- Page: 5 ----------------------
oSIST prEN 2995-006:2020
prEN 2995-006:2020 (E)
1 Scope
This document specifies the characteristics of single-pole circuit breakers, temperature compensated
with a rated current from 1 A to 25 A, used in aircraft on-board circuits at a temperature between –55 °C
and 125 °C and at an altitude of 15 000 m max.These circuit breakers are operated by a push-pull type single push button (actuator), with delayed action
“trip-free” tripping with a polarized signal contact which is open when main contacts are closed, and
inversely.They will continue to function up to the short-circuit current.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
EN 2282, Aerospace series - Characteristics of aircraft electrical suppliesEN 2995-001, Aerospace series - Circuit breakers, single-pole, temperature compensated, rated current 1 A
to 25 A - Part 001: Technical specificationTR 6083, Aerospace series - Cut-outs for installation of electrical components
FED-STD-595B, Colours used in Government Procurement
MIL-PRF-19500, Performance specification: Semiconductor devices, general specification for
IEC 60934:2019, Circuit Breakers for Equipment (CBE)3 Terms and definitions
No terms and definitions are listed in this document.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
• ISO Online browsing platform: available at https://www.iso.org/obp/ui• IEC Electropedia: available at http://www.electropedia.org/
4 Dimensions and mass
4.1 Dimensional characteristics
The circuit breakers do not have to correspond to the pictorial illustration, only the dimensions given
shall be adhered to. The mounting surface is the contact surface with the circuit breaker panel.
See Figure 1.Published as ASD-STAN Technical Report at the date of publication of this document by AeroSpace and Defence
industries Association of Europe – Standardization (ASD-STAN), http://www.asd-stan.org/
Published by: Department of Defense (DOD), the Pentagon, Washington D.C. 20301 USA
---------------------- Page: 6 ----------------------oSIST prEN 2995-006:2020
prEN 2995-006:2020 (E)
Dimensions in millimetres
Standard push button (S):
---------------------- Page: 7 ----------------------
oSIST prEN 2995-006:2020
prEN 2995-006:2020 (E)
Extra length push button (L):
---------------------- Page: 8 ----------------------
oSIST prEN 2995-006:2020
prEN 2995-006:2020 (E)
Key
1 push button released 10 rated current marking (white on black)
2 black colour according to FED-STD-595B 11 mounting surface
3 white 12 optional hole compliant to IEC 60934:2019,
Annex E
4 marking, see Clau
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.