Aerospace series - Wire and cable marking process, UV Laser

This document is applicable to the marking of aerospace vehicle electrical wires and cables using ultraviolet (UV) lasers.
This document specifies the process requirements for the implementation of UV laser marking of aerospace electrical wire and cable and fibre optic cable to achieve an acceptable quality mark using equipment designed for UV laser wire marking of identification codes on aircraft wire and cable subject to EN 3475-100, Aerospace series - Cables, electrical, aircraft use - Test methods - Part 100: General. Wiring specified as UV laser markable and which has been marked in accordance with this document will conform to the requirements of EN 3838.
This document is applicable to the marking of airframe electrical wires and cables using ultraviolet (UV) lasers. The laser process practices defined in this document are mandatory.

Luft- und Raumfahrt - Leitungs- und Kabelkennzeichnungsverfahren durch UV-Laser

Dieses Dokument ist anwendbar auf das Kennzeichnen von elektrischen Leitungen und Kabeln von Luft- und Raumfahrtzeugen unter Anwendung von Ultraviolett(UV)-Lasern.
Dieses Dokument legt die Anforderungen an das Verfahren zur Einführung des Kennzeichnens von elektrischen Leitungen, Kabeln und Lichtwellenleiterkabeln mit UV-Laser fest, um mit für die Kennzeichnung von Leitungen mit UV-Laser konstruierten Geräten eine Kennzeichnung von annehmbarer Qualität auf für die Luft- und Raumfahrt vorgesehenen Leitungen und Kabeln zu erzeugen, die den Anforderungen der EN 3475 100, Luft- und Raumfahrt — Elektrische Leitungen für Luftfahrt, Verwendung — Prüfverfahren — Teil 100: Allgemeines, unterliegen. Leitungen, die entsprechend den Festlegungen mit UV-Laser gekennzeichnet werden können und die entsprechend diesem Dokument gekennzeichnet wurden, erfüllen die Anforderungen von EN 3838.
Dieses Dokument ist anwendbar auf die Kennzeichnung von elektrischen Leitungen und Kabeln für Flugwerke unter Anwendung von Ultraviolett(UV)-Lasern. Die in dieser Norm festgelegten Praktiken hinsichtlich des Laserverfahrens sind zwingend vorgeschrieben.

Série aérospatiale - Procédé de marquage des fils et câbles par laser UV

Le présent document est applicable au marquage des fils et des câbles électriques de véhicules aérospatiaux par lasers ultraviolets (UV).
Ce document spécifie les exigences relatives au procédé de mise en oeuvre du marquage au laser UV des fils et câbles électriques ainsi que des câbles de fibres optiques pour l’aérospatiale, en vue d’obtenir une marque de qualité acceptable en utilisant des équipements conçus pour le marquage au laser UV de codes d'identification sur les fils et câbles à usage aéronautique relevant de l’EN 3475-100, Série aérospatiale - Câbles électriques à usage aéronautique - Méthodes d'essais - Partie 100 : Généralités. Les câblages spécifiés comme marquables au laser UV et qui ont été marqués conformément au présent document seront conformes aux exigences de l'EN 3838.
Le présent document est applicable au marquage des fils et câbles électriques de cellules par lasers ultraviolets (UV). Les pratiques liées au procédé laser définies dans le présent document sont obligatoires.

Aeronavtika - Postopek označevanja žic in kablov z UV-laserjem

Ta dokument se uporablja za označevanje električnih žic in kablov aeronavtičnih plovil z ultravijoličnimi (UV) laserji.
Ta dokument določa procesne zahteve za izvedbo ultravijoličnega laserskega označevanja električnih žic in kablov in kablov in optičnih vlaken aeronavtičnih plovil, da se doseže sprejemljiva oznaka kakovosti z opremo, zasnovano za ultravijolično lasersko označevanje identifikacijskih kod žic in kablov na aeronavtičnih plovilih v skladu s standardom EN 3475-100, Aeronavtika – kabli, električni elementi, uporaba v letalih – preskusne metode – 100. del: Splošno. Ožičenje, ki ga je mogoče označiti z ultravijoličnim laserjem in je označeno v skladu s tem dokumentom, bo izpolnjevalo zahteve standarda EN 3838.
Ta dokument se uporablja za označevanje električnih žic in kablov v ogrodjih letal z ultravijoličnimi (UV) laserji. Prakse laserske obdelave, ki so določene v tem dokumentu, so obvezne.

General Information

Status
Published
Publication Date
28-Feb-2023
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
01-Mar-2023
Completion Date
01-Mar-2023

Relations

Buy Standard

Standard
EN 4650:2023 - BARVE
English language
26 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN 4650:2020
English language
22 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 4650:2023
01-maj-2023
Aeronavtika - Postopek označevanja žic in kablov z UV-laserjem
Aerospace series - Wire and cable marking process, UV Laser
Luft- und Raumfahrt - Leitungs- und Kabelkennzeichnungsverfahren durch UV-Laser
Série aérospatiale - Procédé de marquage des fils et câbles au laser UV
Ta slovenski standard je istoveten z: EN 4650:2023
ICS:
49.060 Letalska in vesoljska Aerospace electric
električna oprema in sistemi equipment and systems
SIST EN 4650:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 4650:2023

---------------------- Page: 2 ----------------------
SIST EN 4650:2023


EN 4650
EUROPEAN STANDARD

NORME EUROPÉENNE

March 2023
EUROPÄISCHE NORM
ICS 49.060 Supersedes EN 4650:2010
English Version

Aerospace series - Wire and cable marking process, UV
Laser
Série aérospatiale - Procédé de marquage des fils et Luft- und Raumfahrt - Leitungs- und
câbles au laser UV Kabelkennzeichnungsverfahren durch UV-Laser
This European Standard was approved by CEN on 2 October 2022.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 4650:2023 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN 4650:2023
EN 4650:2023 (E)
Contents Page
European foreword . 4
Introduction . 6
1 Scope . 7
2 Normative references . 7
3 Terms, definitions, symbols and abbreviations . 7
3.1 Terms and definitions . 7
3.2 Symbols and abbreviations . 12
4 Requirements . 12
4.1 UV laser wire marking requirements . 12
4.2 Design construction file . 12
4.3 Process requirements . 12
4.3.1 Laser wavelength . 12
4.3.2 Mask based laser marking systems (see Clause 8) . 12
4.3.3 Scanning laser marking systems (see Clause 8) . 13
4.3.4 IR radiation .
...

SLOVENSKI STANDARD
oSIST prEN 4650:2020
01-oktober-2020
Aeronavtika - Postopek označevanja žic in kablov z UV-laserjem
Aerospace series - Wire and cable marking process, UV Laser
Luft- und Raumfahrt - Leitungs- und Kabelkennzeichnungsverfahren durch UV-Laser
Série aérospatiale - Procédé de marquage des fils et câbles par laser UV
Ta slovenski standard je istoveten z: prEN 4650
ICS:
49.060 Letalska in vesoljska Aerospace electric
električna oprema in sistemi equipment and systems
oSIST prEN 4650:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 4650:2020

---------------------- Page: 2 ----------------------
oSIST prEN 4650:2020


DRAFT
EUROPEAN STANDARD
prEN 4650
NORME EUROPÉENNE

EUROPÄISCHE NORM

August 2020
ICS Will supersede EN 4650:2010
English Version

Aerospace series - Wire and cable marking process, UV
Laser
Série aérospatiale - Procédé de marquage des fils et Luft- und Raumfahrt - Leitungs- und
câbles par laser UV Kabelkennzeichnungsverfahren durch UV-Laser
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee ASD-
STAN.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 4650:2020 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 4650:2020
prEN 4650:2020 (E)
Contents Page

European foreword . 4
Introduction . 5
1 Scope . 6
2 Normative references . 6
3 Terms, definitions, symbols and abbreviations . 6
3.1 Terms and definitions . 6
3.2 Symbols and abbreviations . 11
4 Requirements . 11
4.1 UV laser wire marking requirements . 11
4.2 Design construction file . 11
4.3 Process requirements . 11
4.3.1 Laser wavelength . 11
4.3.2 Mask based laser marking systems (see Clause 8) . 11
4
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.