EN ISO 7380-2:2011

Button head screws - Part 2: Hexagon socket button head screws with collar (ISO 7380-2:2011)

ISO 7380-2:2011 specifies the characteristics of hexagon socket button head screws with collar with threads from M3 up to and including M16, with product grade A and with reduced loadability.

Schrauben mit abgeflachtem Halbrundkopf - Teil 2: Schrauben mit abgeflachtem Halbrundkopf mit Innensechskant und Bund (ISO 7380-2:2011)

Diese Internationale Norm legt die Eigenschaften von Schrauben mit abgeflachtem Halbrundkopf mit Bund und Innensechskant sowie Gewinden von M3 bis einschließlich M16 in Produktklasse A sowie eingeschränkter Belastbarkeit nach Tabelle 3 fest.
Werden in besonderen Fällen andere Festlegungen als die in der vorliegenden Internationalen Norm benötigt, so können diese den bestehenden Internationalen Normen entnommen, z. B. ISO 261, ISO 888, ISO 898-1, ISO 965-2 und ISO 4759-1.

Vis à tête cylindrique bombée plate - Partie 2: Vis à tête cylindrique bombée plate à six pans creux à embase plate (ISO 7380-2:2011)

L'ISO 7380-2:2011 spécifie les caractéristiques des vis à tête cylindrique bombée plate à six pans creux à embase plate, à capacité de charge réduite, de diamètres de filetage M3 à M16 inclus, et de grade A.

Vijaki s sploščeno polkrožno glavo - 2. del: Sploščena polkrožna glava z robom in notranjim šestkotnikom (ISO 7380-2:2011)

Ta mednarodni standard določa značilnosti vijakov s sploščeno polkrožno glavo z robom in notranjim šestkotnikom z navoji od M3 do vključno M16 razreda izdelave A in z znižano nosilnostjo skladno z preglednico 3. Če se v posebnih primerih zahtevajo specifikacije, ki so drugačne od navedenih v tem mednarodnem standardu, se lahko izberejo med obstoječimi mednarodnimi standardi, tj. ISO 261, ISO 888, ISO 898-1, ISO 965-2 in ISO 4759-1.

General Information

• Status: Withdrawn
• Publication Date: 31-Jul-2011
• Withdrawal Date: 10-Jan-2023
• ICS: 21.060.10 - Bolts, screws, studs
• Technical Committee: CEN/TC 185 - Threaded and nonthreaded mechanical fasteners and accessories
• Drafting Committee: CEN/TC 185 - Threaded and nonthreaded mechanical fasteners and accessories
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 11-Jan-2023
• Ref Project: SIST EN ISO 7380-2:2011 - Button head screws - Part 2: Hexagon socket button head screws with collar (ISO 7380-2:2011)

Relations

• Replaced By: EN ISO 7380-2:2023 - Fasteners - Button head screws with reduced loadability - Part 2: Hexagon socket button head screws with collar (ISO 7380-2:2022)
• Effective Date: 16-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
01-oktober-2011
1DGRPHãþD
SIST EN ISO 7380:2004
9LMDNLVVSORãþHQRSRONURåQRJODYRGHO6SORãþHQDSRONURåQDJODYD]URERPLQ
QRWUDQMLPãHVWNRWQLNRP,62
Button head screws - Part 2: Hexagon socket button head screws with collar (ISO 7380-
2:2011)
Halbrundkopfschrauben (abgeflacht) - Teil 2: Abgeflachter Halbrundkopf mit Bund und
Innensechskant (ISO 7380-2:2011)
Vis à tête cylindrique bombée plate - Partie 2: Vis à tête cylindrique bombée plate à six
pans creux à embase plate (ISO 7380-2:2011)
Ta slovenski standard je istoveten z: EN ISO 7380-2:2011
ICS:
21.060.10 Sorniki, vijaki, stebelni vijaki Bolts, screws, studs
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN ISO 7380-2
NORME EUROPÉENNE
EUROPÄISCHE NORM
August 2011
ICS 21.060.10
English Version
Button head screws - Part 2: Hexagon socket button head
screws with collar (ISO 7380-2:2011)
Vis à tête cylindrique bombée plate - Partie 2: Vis à tête Halbrundkopfschrauben (abgeflacht) - Teil 2: Abgeflachter
cylindrique bombée plate à six pans creux à embase plate Halbrundkopf mit Bund und Innensechskant (ISO 7380-
(ISO 7380-2:2011) 2:2011)
This European Standard was approved by CEN on 22 July 2011.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2011 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 7380-2:2011: E
worldwide for CEN national Members.

Contents Page
Foreword .3

Foreword
This document (EN ISO 7380-2:2011) has been prepared by Technical Committee ISO/TC 2 "Fasteners" in
collaboration with Technical Committee CEN/TC 185 “Fasteners” the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by February 2012, and conflicting national standards shall be withdrawn
at the latest by February 2012.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 7380-2:2011 has been approved by CEN as a EN ISO 7380-2:2011 without any modification.

INTERNATIONAL ISO
STANDARD 7380-2
First edition
2011-08-01
Button head screws —
Part 2:
Hexagon socket button head screws with
collar
Vis à tête cylindrique bombée plate —
Partie 2: Vis à tête cylindrique bombée plate à six pans creux à embase
plate
Reference number
ISO 7380-2:2011(E)
©
ISO 2011
ISO 7380-2:2011(E)
©  ISO 2011
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Published in Switzerland
ii © ISO 2011 – All rights reserved

ISO 7380-2:2011(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 7380-2 was prepared by Technical Committee ISO/TC 2, Fasteners, Subcommittee SC 11, Fasteners
with metric external thread.
ISO 7380 consists of the following parts, under the general title Button head screws:
⎯ Part 1: Hexagon socket button head screws
⎯ Part 2: Hexagon socket button head screws with collar

INTERNATIONAL STANDARD ISO 7380-2:2011(E)

Button head screws —
Part 2:
Hexagon socket button head screws with collar
1 Scope
This International Standard specifies the characteristics of hexagon socket button head screws with collar with
threads from M3 up to and including M16, with product grade A and with reduced loadability according to
Table 3.
If, in special cases, specifications other than those listed in this International Standard are required, they can
be selected from existing International Standards, e.g. ISO 261, ISO 888, ISO 898-1, ISO 965-2 and
ISO 4759-1.
2 Normative references
The following referenced documents are indispensable for the application of t
...