EN ISO 25119-4:202X/FprA1
(Amendment)Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 4: Production, operation, modification and supporting processes - Amendment 1 (ISO 25119-4:2018/Amd 1:2020)
Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 4: Production, operation, modification and supporting processes - Amendment 1 (ISO 25119-4:2018/Amd 1:2020)
Traktoren und Maschinen für die Land- und Forstwirtschaft - Sicherheitsbezogene Teile von Steuerungen - Teil 4: Fertigung, Betrieb, Modifikation und unterstützende Prozesse - Änderung 1 (ISO 25119-4:2018/Amd 1:2020)
No scope available
Tracteurs et matériels agricoles et forestiers - Parties des systèmes de commande relatives à la sécurité - Partie 4: Procédés de production, de fonctionnement, de modification et d'entretien - Amendement 1 (ISO 25119-4:2018/Amd 1:2020)
Traktorji ter kmetijski in gozdarski stroji - Varnostni deli krmilnih sistemov - 4. del: Proizvodni, obratovalni, spreminjevalni in podporni procesi - Dopolnilo A1 (ISO 25119-4:2018/Amd 1:2020)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN ISO 25119-4:2022/oprA1:2022
01-januar-2022
Traktorji ter kmetijski in gozdarski stroji - Varnostni deli krmilnih sistemov - 4. del:
Proizvodni, obratovalni, spreminjevalni in podporni procesi - Dopolnilo A1 (ISO
25119-4:2018/Amd 1:2020)
Tractors and machinery for agriculture and forestry - Safety-related parts of control
systems - Part 4: Production, operation, modification and supporting processes -
Amendment 1 (ISO 25119-4:2018/Amd 1:2020)
Traktoren und Maschinen für die Land- und Forstwirtschaft - Sicherheitsbezogene Teile
von Steuerungen - Teil 4: Fertigung, Betrieb, Modifikation und unterstützende Prozesse -
Änderung 1 (ISO 25119-4:2018/Amd 1:2020)
Tracteurs et matériels agricoles et forestiers - Parties des systèmes de commande
relatives à la sécurité - Partie 4: Procédés de production, de fonctionnement, de
modification et d'entretien - Amendement 1 (ISO 25119-4:2018/Amd 1:2020)
Ta slovenski standard je istoveten z: EN ISO 25119-4:202X/prA1
ICS:
35.240.99 Uporabniške rešitve IT na IT applications in other fields
drugih področjih
65.060.01 Kmetijski stroji in oprema na Agricultural machines and
splošno equipment in general
oSIST prEN ISO 25119- en,fr,de
4:2022/oprA1:2022
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN ISO 25119-4:2022/oprA1:2022
---------------------- Page: 2 ----------------------
oSIST prEN ISO 25119-4:2022/oprA1:2022
INTERNATIONAL ISO
STANDARD 25119-4
First edition
2018-10
AMENDMENT 1
2020-10
Tractors and machinery for
agriculture and forestry — Safety-
related parts of control systems —
Part 4:
Production, operation, modification
and supporting processes
AMENDMENT 1
Tracteurs et matériels agricoles et forestiers — Parties des systèmes
de commande relatives à la sécurité —
Partie 4: Procédés de production, de fonctionnement, de modification
et d'entretien
AMENDEMENT 1
Reference number
ISO 25119-4:2018/Amd.1:2020(E)
©
ISO 2020
---------------------- Page: 3 ----------------------
oSIST prEN ISO 25119-4:2022/oprA1:2022
ISO 25119-4:2018/Amd.1:2020(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2020
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2020 – All rights reserved
---------------------- Page: 4 ----------------------
oSIST prEN ISO 25119-4:2022/oprA1:2022
ISO 25119-4:2018/Amd.1:2020(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/ patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.