EN ISO 2009:2011

Slotted countersunk flat head screws - Product grade A (ISO 2009:2011)

ISO 2009:2011 specifies the characteristics of slotted countersunk flat head screws of product grade A and with threads from M1,6 to M10 inclusive.

Senkschrauben mit Schlitz - Produktklasse A (ISO 2009:2011)

Diese Internationale Norm legt die Eigenschaften von Senkschrauben mit Schlitz, in Produktklasse A, mit
Gewinde von M1,6 bis M10 fest.
Falls in besonderen Fällen andere Festlegungen als die in der vorliegenden Internationalen Norm benötigt
werden, können diese den bestehenden Internationalen Normen entnommen werden, z. B. ISO 261, ISO 888,
ISO 898-1, ISO 965-2 und ISO 3506-1.

Vis à métaux à tête fraisée fendue - Grade A (ISO 2009:2011)

L'ISO 2009:2011 spécifie les caractéristiques des vis à métaux à tête fraisée fendue de grade A et de diamètre de filetage M1,6 à M10 inclus.

Vijaki z zarezano ugrezno glavo - Razred izdelave A (ISO 2009:2011)

Ta mednarodni standard določa značilnosti vijakov z zarezano ugrezno glavo razreda izdelave A in z navoji od M1,6 do vključno M10.
Če se v posebnih primerih zahtevajo specifikacije, ki so drugačne od navedenih v tem mednarodnem standardu, se lahko izberejo med obstoječimi mednarodnimi standardi, na primer ISO 261, ISO 888, ISO 898-1, ISO 965-1 in ISO 3506-1.

General Information

• Status: Published
• Publication Date: 31-Aug-2011
• Withdrawal Date: 30-Mar-2012
• ICS: 21.060.10 - Bolts, screws, studs
• Technical Committee: CEN/TC 185 - Threaded and nonthreaded mechanical fasteners and accessories
• Drafting Committee: CEN/TC 185 - Threaded and nonthreaded mechanical fasteners and accessories
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 01-Sep-2011
• Completion Date: 01-Sep-2011
• Directive: 97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
• Mandate: M/071 - Mandate to CEN for standardization in the field of Pressure equipment
• Ref Project: SIST EN ISO 2009:2011 - Slotted countersunk flat head screws - Product grade A (ISO 2009:2011)

Relations

• Replaces: EN ISO 2009:1994 - Slotted countersunk flat head screws (common head style) - Product grade A (ISO 2009:1994)
• Effective Date: 10-Sep-2011

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 2009:2011
01-december-2011
1DGRPHãþD
SIST EN ISO 2009:1996
Vijaki z zarezano ugrezno glavo - Razred izdelave A (ISO 2009:2011)
Slotted countersunk flat head screws - Product grade A (ISO 2009:2011)
Senkschrauben mit Schlitz (Einheitskopf) - Produktklasse A (ISO 2009:2011)
Vis à métaux à tête fraisée fendue - Grade A (ISO 2009:2011)
Ta slovenski standard je istoveten z: EN ISO 2009:2011
ICS:
21.060.10 Sorniki, vijaki, stebelni vijaki Bolts, screws, studs
SIST EN ISO 2009:2011 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 2009:2011

---------------------- Page: 2 ----------------------

SIST EN ISO 2009:2011


EUROPEAN STANDARD
EN ISO 2009

NORME EUROPÉENNE

EUROPÄISCHE NORM
September 2011
ICS 21.060.10 Supersedes EN ISO 2009:1994
English Version
Slotted countersunk flat head screws - Product grade A (ISO
2009:2011)
Vis à métaux à tête fraisée fendue - Grade A (ISO Senkschrauben mit Schlitz - Produktklasse A (ISO
2009:2011) 2009:2011)
This European Standard was approved by CEN on 8 August 2011.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2011 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 2009:2011: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 2009:2011
EN ISO 2009:2011 (E)
Contents Page
Foreword .3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 2009:2011
EN ISO 2009:2011 (E)
Foreword
This document (EN ISO 2009:2011) has been prepared by Technical Committee ISO/TC 2 "Fasteners" in
collaboration with Technical Committee CEN/TC 185 “Fasteners” the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by March 2012, and conflicting national standards shall be withdrawn at
the latest by March 2012.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 2009:1994.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 2009:2011 has been approved by CEN as a EN ISO 2009:2011 without any modification.

3

---------------------- Page: 5 ----------------------

SIST EN ISO 2009:2011

---------------------- Page: 6 ----------------------

SIST EN ISO 2009:2011

INTERNATIONAL ISO
STANDARD 2009
Fourth edition
2011-09-01


Slotted countersunk flat head screws —
Product grade A
Vis à métaux à tête fraisée fendue — Grade A




Reference number
ISO 2009:2011(E)
©
ISO 2011

---------------------- Page: 7 ----------------------

SIST EN ISO 2009:2011
ISO 2009:2011(E)

COPYRIGHT PROTECTED DOCUMENT


©  ISO 2011
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying an
...