EN 2878:2018+AC:2019

Aerospace series - Nuts, anchor, self-locking, air resistant, sealing, floating, two lug, with counterbore, in alloy steel, cadmium plated, MoS2 lubricated - Classification: 900 MPa (at ambient temperature)/235 °C

This European standard specifies the characteristics of self-locking, air resistant, sealing, floating, two lug anchor nuts, with counterbore, in alloy steel, cadmium plated, MoS2 lubricated.
Classification: 900 MPa/235 °C.

Luft- und Raumfahrt - Annietmuttern, selbstsichernd, druckdicht, luftbeständig, beweglich, beiderseitiger Flansch, mit zylindrischer Aussenkung, aus legiertem Stahl, verkadmet, MoS2-geschmiert - Klasse: 900 MPa (bei Raumtemperatur)/235 °C

Diese Europäische Norm legt die Eigenschaften von selbstsichernden, luftbeständigen, abdichtenden,
beweglichen Annietmuttern mit beiderseitigem Flansch, mit zylindrischer Aussenkung, in Stahllegierung,
mit Kadmierung und MoS2-Schmierung fest.
Klasse: 900 MPa1/235 °C2.

Série aérospatiale - Écrous à river, à freinage interne, étanches à l'air, flottants, double patte, avec chambrage, en acier allié, cadmiés, lubrifiés MoS2 - Classification: 900 MPa (à température ambiante)/235 °C

La présente Norme européenne spécifie les caractéristiques des écrous à river, à freinage interne, étanches à l’air, flottants, double patte, avec chambrage, en acier allié, cadmiés, lubrifiés au MoS2.
Classification : 900 MPa 1)/235 °C2).

Aeronavtika - Zakovne matice, samozaporne, vremensko odporne, tesnjene, premične, dvostranske, z izvrtino za valjaste vijake, iz legiranega jekla, kadmirane, mazane z MoS2 - Klasifikacija: 900 MPa (pri okoljski temperaturi)/235 °C (vključno s popravkom AC)

Ta evropski standard določa lastnosti samozapornih, vremensko odpornih, tesnjenih, premičnih, dvostranskih zakovnih matic, z izvrtino za valjaste vijake, iz legiranega jekla, kadmiranih, mazanih z MoS2.
Klasifikacija: 900 MPa/235 °C.

General Information

• Status: Published
• Publication Date: 09-Apr-2019
• Withdrawal Date: 30-Oct-2019
• ICS: 49.030.30 - Nuts
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN - Aerospace
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 10-Apr-2019
• Completion Date: 10-Apr-2019
• Ref Project: SIST EN 2878:2018+AC:2019 - Aerospace series - Nuts, anchor, self-locking, air resistant, sealing, floating, two lug, with counterbore, in alloy steel, cadmium plated, MoS2 lubricated - Classification: 900 MPa (at ambient temperature)/235 °C

Relations

• Merged From: EN 2878:2018 - Aerospace series - Nuts, anchor, self-locking, air resistant, sealing, floating, two lug, with counterbore, in alloy steel, cadmium plated, MoS2 lubricated - Classification: 900 MPa (at ambient temperature)/235 °C
• Effective Date: 17-Apr-2019

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 2878:2018+AC:2019
01-junij-2019
Nadomešča:
SIST EN 2878:2018
Aeronavtika - Zakovne matice, samozaporne, vremensko odporne, tesnjene,

premične, dvostranske, z izvrtino za valjaste vijake, iz legiranega jekla, kadmirane,

mazane z MoS2 - Klasifikacija: 900 MPa (pri okoljski temperaturi)/235 °C (vključno

s popravkom AC)

Aerospace series - Nuts, anchor, self-locking, air resistant, sealing, floating, two lug, with

counterbore, in alloy steel, cadmium plated, MoS2 lubricated - Classification: 900 MPa

(at ambient temperature)/235 °C
Luft- und Raumfahrt - Annietmuttern, selbstsichernd, druckdicht, luftbeständig,

beweglich, beiderseitiger Flansch, mit zylindrischer Aussenkung, aus legiertem Stahl,

verkadmet, MoS2-geschmiert - Klasse: 900 MPa (bei Raumtemperatur)/235 °C

Série aérospatiale - Écrous à river, à freinage interne, étanches à l'air, flottants, double

patte, avec chambrage, en acier allié, cadmiés, lubrifiés MoS2 - Classification: 900 MPa

(à température ambiante)/235 °C
Ta slovenski standard je istoveten z: EN 2878:2018+AC:2019
ICS:
21.060.20 Matice Nuts
49.030.30 Matice Nuts
SIST EN 2878:2018+AC:2019 en,fr,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 2878:2018+AC:2019
---------------------- Page: 2 ----------------------
SIST EN 2878:2018+AC:2019
EN 2878:2018+AC
EUROPEAN STANDARD
NORME EUROPÉENNE
April 2019
EUROPÄISCHE NORM
ICS 49.030.30 Supersedes EN 2878:2018
English Version
Aerospace series - Nuts, anchor, self-locking, air resistant,
sealing, floating, two lug, with counterbore, in alloy steel,
cadmium plated, MoS2 lubricated - Classification: 900 MPa
(at ambient temperature)/235 °C

Série aérospatiale - Écrous à river, à freinage interne, Luft- und Raumfahrt - Annietmuttern, selbstsichernd,

étanches à l'air, flottants, double patte, avec druckdicht, luftbeständig, beweglich, beiderseitiger

chambrage, en acier allié, cadmiés, lubrifiés MoS2 - Flansch, mit zylindrischer Aussenkung, aus legiertem

Classification: 900 MPa (à température ambiante)/235 Stahl, verkadmet, MoS2-geschmiert - Klasse: 900 MPa

°C (bei Raumtemperatur)/235 °C

This European Standard was approved by CEN on 11 June 2018 and includes the Corrigendum issued by CEN on 10 April 2019.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this

European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references

concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN

member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by

translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management

Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,

Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,

Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,

Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATIO N
EUROPÄISCHES KOMITEE FÜR NORMUN G
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels

© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 2878:2018+AC:2019 E

worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 2878:2018+AC:2019
EN 2878:2018+AC:2019 (E)
Contents Page

European foreword ....................................................................................................................................................... 3

1 Scope .................................................................................................................................................................... 4

2 Normative references .................................................................................................................................... 4

3 Required characteristics .............................................................................................................................. 5

4 Designation........................................................................................................................................................ 8

5 Marking ............................................................................................................................................................... 8

6 Technical specification .................................................................................................................................. 8

---------------------- Page: 4 ----------------------
SIST EN 2878:2018+AC:2019
EN 2878:2018+AC:2019 (E)
European foreword

This document (EN 2878:2018+AC:2019) has been prepared by the Aerospace and Defence Industries

Association of Europe - Standardization (ASD-STAN).

After enquiries and votes carried out in accordance with the rules of this Association, this Standard has

received the approval of the National Associations and the Official Services of the member countries of

ASD, prior to its presentation to CEN.

This European Standard shall be given the status of a national standard, either by publication of an

identical text or by endorsement, at the latest by October 2019, and conflicting national standards shall

be withdrawn at the latest by October 2019.

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. CEN shall not be held responsible for identifying any or all such patent rights.

This document incl
...