FprEN 2884
(Main)Aerospace series - Screws, pan head, offset cruciform recess, coarse tolerance normal shank, short thread, in titanium alloy, anodized, MoS2 lubricated - Classification: 1 100 MPa (at ambient temperature)/315 °C
Aerospace series - Screws, pan head, offset cruciform recess, coarse tolerance normal shank, short thread, in titanium alloy, anodized, MoS2 lubricated - Classification: 1 100 MPa (at ambient temperature)/315 °C
This document specifies the characteristics of screws, pan head, offset cruciform recess, coarse tolerance normal shank, short thread, in titanium alloy, anodized, MoS2 lubricated.
Classification: 1 100 MPa /315 °C ·
Luft- und Raumfahrt - Flachkopfschrauben mit Flügelkreuzschlitz, kurzes Gewinde, aus Titanlegierung, anodisiert, MoS2 geschmiert - Klasse: 1 100 MPa (bei Raumtemperatur)/315 °C
No Scope available
Série aérospatiale - Vis à tête cylindrique, à empreinte cruciforme déportée, tige normale à tolérance large, filetage court, en alliage de titane, anodisées, lubrifiées au MoS2 - Classification : 1 100 MPa (à température ambiante)/315 °C
Le présent document spécifie les caractéristiques des vis à tête cylindrique, à empreinte cruciforme déportée, tige normale à tolérance large, filetage court, en alliage de titane, anodisées, lubrifiées au MoS2.
Classification : 1 100 MPa /315 °C.
Aeronavtika - Vijaki, valjasta glava, križna zareza, široka toleranca, kratek navoj, iz titanove zlitine, anodizirane, mazane z MoS2 - Klasifikacija: 1100 MPa (pri temperaturi okolice)/315 °C
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN 2884:2020
01-julij-2020
Aeronavtika - Vijaki, valjasta glava, križna zareza, široka toleranca, kratek navoj, iz
titanove zlitine, anodizirane, mazane z MoS2 - Klasifikacija: 1100 MPa (pri
temperaturi okolice)/315 °C
Aerospace series - Screws, pan head, offset cruciform recess, coarse tolerance normal
shank, short thread, in titanium alloy, anodized, MoS2 lubricated - Classification: 1 100
MPa (at ambient temperature)/315 °C
Luft- und Raumfahrt - Flachkopfschrauben mit Flügelkreuzschlitz, kurzes Gewinde, aus
Titanlegierung, anodisiert, MoS2 geschmiert - Klasse: 1 100 MPa (bei
Raumtemperatur)/315 °C
Série aérospatiale - Vis à tête cylindrique, à empreinte cruciforme déportée, tige normale
à tolérance large, filetage court, en alliage de titane, anodisées, lubrifiées MoS2 -
Classification : 1 100 MPa (à température ambiante)/315 °C
Ta slovenski standard je istoveten z: prEN 2884
ICS:
49.025.30 Titan Titanium
49.030.20 Sorniki, vijaki, stebelni vijaki Bolts, screws, studs
oSIST prEN 2884:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 2884:2020
---------------------- Page: 2 ----------------------
oSIST prEN 2884:2020
DRAFT
EUROPEAN STANDARD
prEN 2884
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2020
ICS 49.030.20 Will supersede EN 2884:1996
English Version
Aerospace series - Screws, pan head, offset cruciform
recess, coarse tolerance normal shank, short thread, in
titanium alloy, anodized, MoS2 lubricated - Classification:
1 100 MPa (at ambient temperature)/315 °C
Série aérospatiale - Vis à tête cylindrique, à empreinte Luft- und Raumfahrt - Flachkopfschrauben mit
cruciforme déportée, tige normale à tolérance large, Flügelkreuzschlitz, kurzes Gewinde, aus
filetage court, en alliage de titane, anodisées, lubrifiées Titanlegierung, anodisiert, MoS2 geschmiert - Klasse: 1
MoS2 - Classification : 1 100 MPa (à température 100 MPa (bei Raumtemperatur)/315 °C
ambiante)/315 °C
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee ASD-
STAN.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 2884:2020 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 2884:2020
prEN 2884:2020 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Required characteristics . 5
4.1 Configuration — Dimensions — Masses . 5
4.2 Tolerances o
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.