iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 13451-3:2022/prA1

(Amendment)

Swimming pool equipment - Part 3: Additional specific safety requirements and test methods for inlets and outlets and water/air based water leisure features installed in pools for public use

Swimming pool equipment - Part 3: Additional specific safety requirements and test methods for inlets and outlets and water/air based water leisure features installed in pools for public use

This document specifies safety requirements and test methods for inlets and outlets for water/air and water/air based leisure features involving water movement, in addition to the general safety requirements of EN 13451-1.
The requirements of this specific standard take priority over those in EN 13451-1.
This part of EN 13451 is applicable to swimming pool equipment installed in pools for public use designed for:
-   the introduction and/or extraction of water for treatment or leisure purposes;
-   the introduction of air for leisure purposes;
-   water leisure features involving the movement of water.
NOTE   The above items are identified with the general term devices.

Schwimmbadgeräte - Teil 3: Zusätzliche besondere sicherheitstechnische Anforderungen und Prüfverfahren für Ein- und Ausläufe sowie Wasser-Luftattraktionen in öffentlichen Schwimmbädern

Équipement de piscine - Partie 3 : Exigences de sécurité et méthodes d'essai complémentaires spécifiques aux pièces d'aspiration et de refoulement et aux équipements de loisirs aquatiques disposant d'introduction et d'extraction d'eau/d'air, installés dans les piscines destinées à un usage public

Oprema za plavalne bazene - 3. del: Dodatne posebne varnostne zahteve in preskusne metode za bazenski pribor za pripravo vode, vgrajen v javne bazene - Dopolnilo A1

General Information

Status
Not Published
Publication Date
10-Aug-2025
ICS
97.220.10 - Sports facilities
Technical Committee
CEN/TC 136 - Sports, playground and other recreational equipment
Drafting Committee
CEN/TC 136/WG 8 - Swimming pool equipment
Current Stage
4060 - Closure of enquiry - Enquiry
Start Date
13-Jun-2024
Due Date
17-Jun-2024
Completion Date
13-Jun-2024
Ref Project
SIST EN 13451-3:2022/oprA1:2024 - Swimming pool equipment - Part 3: Additional specific safety requirements and test methods for inlets and outlets and water/air based water leisure features installed in pools for public use

Relations

Amends
EN 13451-3:2022 - Swimming pool equipment - Part 3: Additional specific safety requirements and test methods for inlets and outlets and water/air based water leisure features installed in pools for public use
Effective Date
03-May-2023

Buy Standard

EN 13451-3:2022/oprA1:2024EN 13451-3:2022/oprA1:2024
PreviousNext
Draft
EN 13451-3:2022/oprA1:2024
English language
4 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-junij-2024
Oprema za plavalne bazene - 3. del: Dodatne posebne varnostne zahteve in
preskusne metode za bazenski pribor za pripravo vode, vgrajen v javne bazene -
Dopolnilo A1
Swimming pool equipment - Part 3: Additional specific safety requirements and test
methods for inlets and outlets and water/air based water leisure features installed in
pools for public use
Schwimmbadgeräte - Teil 3: Zusätzliche besondere sicherheitstechnische
Anforderungen und Prüfverfahren für Ein- und Ausläufe sowie Wasser-Luftattraktionen in
öffentlichen Schwimmbädern
Équipement de piscine - Partie 3 : Exigences de sécurité et méthodes d'essai
complémentaires spécifiques aux pièces d'aspiration et de refoulement et aux
équipements de loisirs aquatiques disposant d'introduction et d'extraction d'eau/d'air,
installés dans les piscines destinées à un usage public
Ta slovenski standard je istoveten z: EN 13451-3:2022/prA1
ICS:
97.220.10 Športni objekti Sports facilities
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

DRAFT
EUROPEAN STANDARD
EN 13451-3:2022
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA1
March 2024
ICS 97.220.10
English Version
Swimming pool equipment - Part 3: Additional specific
safety requirements and test methods for inlets and
outlets and water/air based water leisure features
installed in pools for public use
Équipement de piscine - Partie 3 : Exigences de Schwimmbadgeräte - Teil 3: Zusätzliche besondere
sécurité et méthodes d'essai complémentaires sicherheitstechnische Anforderungen und
spécifiques aux pièces d'aspiration et de refoulement Prüfverfahren für Ein- und Ausläufe sowie Wasser-
et aux équipements de loisirs aquatiques disposant Luftattraktionen in öffentlichen Schwimmbädern
d'introduction et d'extraction d'eau/d'air, installés dan
This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 136.

This draft amendment A1, if approved, will modify the European Standard EN 13451-3:2022. If this draft becomes an
amendment, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for
inclusion of this amendment into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Icela
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 15288-1:2018+A1:2024(Main)
Swimming pools for public use - Part 1: Safety requirements for design
SIST EN 15288-1:2019+A1:2024

This document specifies safety requirements relevant to certain aspects of the design and construction of classified pools according to Clause 4. It is intended for those concerned with the design, construction, planning and operation of classified swimming pools. It provides guidance about the risks associated by identifying the design characteristics required for a safe environment.
The requirements of this document are applicable to all new classified pools and, as appropriate, to specific refurbishments of classified existing pools.
This document has limited application to classified pools which consist of segregated areas of rivers, lakes or the sea but this document should be followed where relevant.
National and/or local legislation may apply.
This document is not applicable to domestic swimming pools according to EN 16582 (all parts). Further definitions of domestic swimming pools and/or use are given in EN 16582.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13451-1:2020+A1:2024(Main)
Swimming pool equipment - Part 1: General safety requirements and test methods for equipment installed in pools for public use
SIST EN 13451-1:2021+A1:2024

This document specifies general safety requirements and test methods for equipment installed in swimming pools for public use as classified in EN 15288-1 and EN 15288-2.
Where specific standards exist, this general standard is not expected to be used alone.
Special care is expected to be taken in applying this general standard alone to equipment for which no product specific standard has yet been published.

  • Standard
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13451-11:2022(Main)
Swimming pool equipment - Part 11: Additional specific safety requirements and test methods for moveable pool floors and moveable bulkheads installed in pools for public use
SIST EN 13451-11:2023

This document specifies the safety requirements and the means of their verification for the design and construction of moveable pool floors and moveable bulkheads for use in classified swimming pools as specified in EN 15288-1 and EN 15288-2.
This document deals with all significant hazards, hazardous situations and events, as listed in Annex A, relevant to this equipment when used as intended and under the conditions of misuse reasonably foreseeable by the manufacturer during normal operation and service.
NOTE   When requirements of this part of EN 13451 series are different from those which are stated in EN 13451-1, the requirements of this part of EN 13451 series take precedence over the requirements of EN 13451-1 for moveable floors and moveable bulkheads that have been designed and built according to the requirements of this part of EN 13451 series.
This document does not apply to installations or equipment intended to move people into or out of a pool tank.
This document is not applicable to equipment which is manufactured before the date of its publication as a European standard.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 23659:2022(Main)
Sports and recreational facilities - Trampoline parks - Safety requirements (ISO 23659:2022)
SIST EN ISO 23659:2023

This document specifies safety requirements for the design, construction, inspection and maintenance of trampoline parks and their components.
This document also specifies minimum operational requirements to ensure an appropriate level of safety and service when used for recreational, training or educational purposes.
This document is applicable to trampoline parks and trampoline park areas within multi activity parks. This also includes landing areas such as airbags and foam pits.
This document is intended for use by trampoline park manufacturers, installers, operators, inspectors and enforcement bodies.
This document does not cover:
a) general building regulations;
b) fire regulations;
c) planning regulations;
d) water testing;
e) food and drink provision;
f) non-trampoline activities e.g. artificial climbing, parkour, obstacle courses and miscellaneous future activities;
g) chemical composition of components;
h) outdoor trampoline parks;
i) equipment and procedures covered by the referenced documents listed in Clause2;
j) general aspects of work safety.

  • Standard
    77 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13451-3:2022(Main)
Swimming pool equipment - Part 3: Additional specific safety requirements and test methods for inlets and outlets and water/air based water leisure features installed in pools for public use
SIST EN 13451-3:2022

This document specifies safety requirements and test methods for inlets and outlets for water/air and water/air based leisure features involving water movement, in addition to the general safety requirements of EN 13451-1.
The requirements of this specific standard take priority over those in EN 13451-1.
This part of EN 13451 is applicable to swimming pool equipment installed in pools for public use designed for:
-   the introduction and/or extraction of water for treatment or leisure purposes;
-   the introduction of air for leisure purposes;
-   water leisure features involving the movement of water.
NOTE   The above items are identified with the general term devices.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13451-2:2015+A1:2020(Main)
Swimming pool equipment - Part 2: Additional specific safety requirements and test methods for ladders, stepladders and handle bends
SIST EN 13451-2:2016+A1:2020

This part of EN 13451 specifies safety requirements for ladders, stepladders and handle bends in addition to the general safety requirements of EN 13451-1.
The requirements of this specific standard take priority over those in EN 13451-1.
This part of EN 13451 is applicable to manufactured ladders, stepladders and handle bends used for pool access and egress for use in classified swimming pools as specified in EN 15288-1 and EN 15288-2.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15567-1:2015+A1:2020(Main)
Sports and recreational facilities - Ropes courses - Part 1: Construction and safety requirements
SIST EN 15567-1:2015+A1:2020

This European Standard applies to permanent and mobile ropes courses and their components.
This European Standard specifies safety requirements for the design, construction, inspection and maintenance of ropes courses and their components.
This European Standard does not apply to temporary ropes courses (see 3.3) and children's play grounds (see EN 1176 all parts).
For the use of ropes courses EN 15567 2 applies.

  • Standard
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14974:2019(Main)
Skateparks - Safety requirements and test methods
SIST EN 14974:2019

This document applies to skateparks for public use intended for the use of skateboards, other roller sports equipments and BMX bikes.
It specifies safety requirements and requirements for testing and marking, information supplied by the manufacturer, information for users, as well as for inspection and maintenance to protect users and third parties (e.g. spectators) from hazards, as far as possible, when using a skatepark as intended, or as can be reasonably expected.
This standard does not apply to bike facilities modelled from ground, gravel or rock.

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17164:2018(Main)
Climbing/bouldering walls for use in the water area of swimming pools of public use - Safety and operational requirements
SIST EN 17164:2019

This document specifies safety requirements for climbing/bouldering walls, which are vertical and/or overhanging towards the water area, for use in the water area of swimming pools for public use in addition to the general safety requirements of EN 13451-1. It is therefore advised to read this document in conjunction with EN 13451-1. Requirements for the use, the operation and the maintenance are also specified.
This standard is applicable to climbing/bouldering walls in classified swimming pools as specified in EN 15288-1.
This standard is not applicable to climbing/bouldering walls in swimming pools for domestic use.
This standard has limited application to water areas which consist of segregated areas of rivers, lakes or the sea. It is advised to follow the design, working methods and operational requirements insofar as they are relevant. This standard is not applicable to artificial climbing structures according to EN 12572 (all parts) and to inflatable climbing/bouldering walls according to EN ISO 25649-6.
In the aspects which overlap with EN 13451-10 the requirements of this EN standard take precedence over the EN 13451-10.
NOTE In this standard, "climbing" and "bouldering" are used synonymously.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15288-2:2018(Main)
Swimming pools for public use - Part 2: Safety requirements for operation
SIST EN 15288-2:2019

This document specifies safety requirements for the operation of classified pools according to Clause 4. It is intended for those concerned with the operation and management of classified swimming pools. It provides guidance about the risks for staff and users associated with public swimming pools, by identifying the precautions needed to achieve safety.
This document has limited application to classified pools which consist of segregated areas of rivers, lakes or the sea. It is advised to follow the requirements for safe working methods and supervision insofar as they are relevant.
National and/or local legislation may apply.
This document is not applicable for domestic swimming pools according to EN 16582 (all parts). Further definitions of domestic swimming pools and/or use is given in EN 16582.

  • Standard
    74 pages
    English language
    sale 10% off
    e-Library read for
    1 day