EN 12649:2008+A1:2011
(Main)Concrete compactors and smoothing machines - Safety
Concrete compactors and smoothing machines - Safety
1.1 This document applies to concrete compactors and smoothing machines as defined in Clause 3 and illustrated in Annex A and Annex B.
This standard also applies for hand-held motor-operated concrete vibrators as defined in EN 60745-2-12:2003, but with the additional safety requirements for electronically controlled systems as defined in this standard (see 5.2.1.2).
1.2 This document does not deal with auxiliary equipment which provides the energy for internal and external vibrators, e.g. air compressors, hydraulic power sources and voltage transformers. This document does not apply to remote-controlled or portable smoothing machines and self-acting (robotic) smoothing machines.
1.3 This document deals with all significant hazards, hazardous situations and events relevant to concrete com-pactors and smoothing machines, when they are used as intended and under the conditions foreseen by the manu-facturer (see Clause 4). This document specifies the appropriate technical measures to eliminate or reduce risks aris-ing from the significant hazards.
This standard also includes measures to consider reasonably foreseeable misuse.
1.4 This document is not applicable to machines which are manufactured before the date of publication of this document by CEN.
Maschinen zum Verdichten und Glätten von Beton - Sicherheitsanforderungen
1.1 Dieses Dokument gilt für Maschinen zum Verdichten von Beton und für Glättmaschinen, wie in Ab-schnitt 3 beschrieben und im Anhang A und Anhang B bildlich dargestellt. Diese Norm gilt ebenfalls für motorbetriebene Hand-Betonrüttler wie in EN 60745-2-12:2003 beschrieben, je-doch mit den zusätzlichen Sicherheitsanforderungen für elektronisch gesteuerte Systeme wie in der vorlie-genden Norm (siehe 5.2.1.2) beschrieben. 1.2 Dieses Dokument behandelt keine Zusatzeinrichtungen, die die Energie für Innen- und Außenrüttler bereitstellen, wie z. B. Luftpresser, Aggregate zur Erzeugung hydraulischer Leistung und Spannungstransfor-matoren. Dieses Dokument gilt nicht für ferngesteuerte oder tragbare Glättmaschinen und selbsttätig arbei-tende Glättmaschinen (Roboter). 1.3 Dieses Dokument behandelt alle signifikanten Gefährdungen, Gefährdungssituationen und Gefähr-dungsereignisse, die auf Maschinen zum Verdichten und Glätten von Beton zutreffen, wenn sie bestim-mungsgemäß und entsprechend den vorhersehbaren Bedingungen des Herstellers verwendet werden (siehe Abschnitt 4). Dieses Dokument spezifiziert die entsprechenden technischen Maßnahmen zur Beseitigung oder Verringerung der Risiken, die von den signifikanten Gefährdungen ausgehen. Diese Norm schließt auch Maßnahmen zur Berücksichtigung von vernünftigerweise vorhersehbarem Miss-brauch ein. 1.4 Dieses Dokument gilt nicht für Maschinen, die vor dem Datum der Veröffentlichung dieses Dokuments durch CEN hergestellt wurden.
Compacteurs à béton et talocheuses - Prescriptions de sécurité
Le présent document s’applique aux compacteurs à béton et talocheuses comme définis à l'Article 3 et
illustrés dans l'Annexe A et l'Annexe B.
La présente norme s'applique également aux vibrateurs à béton portatifs à moteur comme définis dans
l'EN 60745-2-12:2003, mais avec des prescriptions supplémentaires de sécurité pour les systèmes à
commande électronique comme définis dans la présente norme (voir 5.2.1.2).
1.2 Le présent document ne traite pas d'équipements auxiliaires qui fournissent l'électricité aux vibrateurs
internes et externes, par exemple les compresseurs d'air, les sources d'énergie hydraulique et les
transformateurs électriques. Le présent document ne s'applique pas aux talocheuses commandées à distance
ou portables et aux talocheuses autonomes (robotisées).
1.3 Le présent document traite de tous les phénomènes dangereux, situations dangereuses et événements
dangereux significatifs liés aux compacteurs à béton et aux talocheuses, lorsqu’ils sont utilisés normalement
et dans les conditions prévues par le fabricant (voir l'Article 4). Le présent document spécifie les mesures
techniques appropriées pour éliminer ou réduire les risques engendrés par les phénomènes dangereux
significatifs.
Stroji za komprimiranje in glajenje betona - Varnost
1.1 Ta dokument velja za stroje za komprimiranje in glajenje betona, kot je določeno v točki 3 in prikazano v dodatku A in dodatku B.
Ta standard prav tako velja za ročne motorne vibratorje betona, kot je določeno v EN 60745-2-12:2003, vendar z dodatnimi varnostnimi zahtevami za elektronsko nadzorovane sisteme, kot je določeno v tem standardu (glej 5.2.1.2).
1.2 Ta dokument ne obravnava pomožne opreme, ki zagotavlja energijo za notranje ali zunanje vibracije, npr. zračnih kompresorjev, hidravličnih virov energije in transformatorjev napetosti. Ta dokument ne velja za daljinsko upravljane ali prenosne stroje za glajenje in samodelujoče (robotske) stroje za glajenje.
1.3 Ta dokument obravnava vse velike nevarnosti, nevarne stanja in dogodke, pomembne za stroje za komprimiranje in glajenje betona, kadar se uporabljajo v skladu z namembnostjo in pod pogoji, kot jih je predvidel proizvajalec (glej točko 4). Ta dokument določa ustrezne tehnične ukrepe za preprečevanje in zmanjševanje tveganj, ki izhajajo iz velikih nevarnosti.
Ta standard prav tako vključuje ukrepe za upoštevanje upravičeno predvidljive napačne uporabe.
1.4 Ta dokument ne velja za stroje, ki so bili izdelani pred datumom, ko je CEN objavil ta dokument.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Stroji za komprimiranje in glajenje betona - VarnostMaschinen zum Verdichten und Glätten von Beton - SicherheitsanforderungenCompacteurs à béton et talocheuses - Prescriptions de sécuritéConcrete compactors and smoothing machines - Safety91.220Gradbena opremaConstruction equipmentICS:Ta slovenski standard je istoveten z:EN 12649:2008+A1:2011SIST EN 12649:2008+A1:2011en,fr,de01-september-2011SIST EN 12649:2008+A1:2011SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 12649:2008+A1
July 2011 ICS 91.220 Supersedes EN 12649:2008English Version
Concrete compactors and smoothing machines - Safety
Compacteurs à béton et talocheuses - Prescriptions de sécurité
Maschinen zum Verdichten und Glätten von Beton - Sicherheitsanforderungen This European Standard was approved by CEN on 21 March 2008 and includes Amendment 1 approved by CEN on 19 May 2011.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 12649:2008+A1:2011: ESIST EN 12649:2008+A1:2011
Illustration of concrete compactors and smoothing machines . 24Annex B (normative)
Dimensions of smoothing machines . 25Annex ZA (informative)
Relationship between this European Standard and the Essential
Requirements of EU Directive 2006/42/EC . 28Bibliography . 29 SIST EN 12649:2008+A1:2011
1 Scope 1.1 This document applies to concrete compactors and smoothing machines as defined in Clause 3 and illus-trated in Annex A and Annex B. This standard also applies for hand-held motor-operated concrete vibrators as defined in EN 60745-2-12:2003, but with the additional safety requirements for electronically controlled systems as defined in this standard (see 5.2.1.2). 1.2 This document does not deal with auxiliary equipment which provides the energy for internal and external vibrators, e.g. air compressors, hydraulic power sources and voltage transformers. This document does not apply to remote-controlled or portable smoothing machines and self-acting (robotic) smoothing machines. 1.3 This document deals with all significant hazards, hazardous situations and events relevant to concrete com-pactors and smoothing machines, when they are used as intended and under the conditions foreseen by the manu-facturer (see Clause 4). This document specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards. This standard also includes measures to consider reasonably foreseeable misuse. 1.4 This document is not applicable to machines which are manufactured before the date of publication of this document by CEN. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. !deleted text" EN 500-1:2006, Mobile road construction machinery — Safety — Part 1: Common requirements EN 574:1996, Safety of machinery — Two-hand control devices — Functional aspects — Principles for design EN 614-1:2006, Safety of machinery — Ergonomic design principles — Part 1: Terminology and general principles !deleted text" EN 953:1997, Safety of machinery — Guards — General requirements for the design and construction of fixed and movable guards EN 982:1996, Safety of machinery — Safety requirements for fluid power systems and their components — Hy-draulics EN 983:1996, Safety of machinery — Safety requirements for fluid power systems and their components — Pneu-matics EN 1032:2003, Mechanical vibration — Testing of mobile machinery in order to determine the vibration emission value EN 1050:1996, Safety of machinery — Principles for risk assessment EN 13309:2000, Construction machinery — Electromagnetic compatibility of machines with internal electrical power supply SIST EN 12649:2008+A1:2011
(ISO 3744:2010)" !EN ISO 4871:2009", Acoustics — Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996) !EN ISO 11201:2010, Acoustics — Noise emitted by machinery and equipment — Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections (ISO 11201:2010)" !EN ISO 11688-1:2009", Acoustics — Recommended practice for the design of low-noise machinery and equipment — Part 1: Planning (ISO/TR 11688-1:1995) EN ISO 12100-1:2003, Safety of machinery — Basic concepts, general principles for design — Part 1: Basic termi-nology, methodology (ISO 12100-1:2003) EN ISO 12100-2:2003, Safety of machinery — Basic concepts, general principles for design — Part 2: Technical principles (ISO 12100-2:2003) EN ISO 13732-1:2006, Ergonomics of the thermal environment — Methods for the assessment of human re-sponses to contact with surfaces — Part 1: Hot surfaces (ISO 13732:2006) EN ISO 13849-1:2006, Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design (ISO 13849-1:2006) !
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.