iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN ISO 11699-2:2018

(Main)

Non-destructive testing - Industrial radiographic films - Part 2: Control of film processing by means of reference values (ISO 11699-2:2018)

Non-destructive testing - Industrial radiographic films - Part 2: Control of film processing by means of reference values (ISO 11699-2:2018)

This document specifies a procedure for the control of film processing systems.

Zerstörungsfreie Prüfung - Industrielle Filme für die Durchstrahlungsprüfung - Teil 2: Kontrolle der Filmverarbeitung mit Hilfe von Referenzwerten (ISO 11699-2:2018)

Dieser Teil der ISO 11699 beschreibt eine Vorgehensweise bei der Kontrolle von Filmverarbeitungs-systemen.

Essais non destructifs - Films utilisés en radiographie industrielle - Partie 2: Contrôle du traitement des films au moyen de valeurs de référence (ISO 11699-2:2018)

Le présent document spécifie un mode opératoire de contrôle des systèmes de traitement des films.

Neporušitveno preskušanje - Filmi za industrijsko radiografijo - 2. del: Kontrola razvijanja filmov s pomočjo referenčnih vrednosti (ISO 11699-2:2018)

Ta dokument določa postopek za kontrolo sistemov za razvijanje filmov.

General Information

Status
Published
Publication Date
11-Sep-2018
Withdrawal Date
30-Mar-2019
ICS
37.040.25 - Radiographic films
Technical Committee
CEN/TC 138 - Non-destructive testing
Drafting Committee
CEN/TC 138/WG 1 - Ionizing radiation testing
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
12-Sep-2018
Completion Date
12-Sep-2018
Ref Project
SIST EN ISO 11699-2:2018 - Non-destructive testing - Industrial radiographic films - Part 2: Control of film processing by means of reference values (ISO 11699-2:2018)

Relations

Replaces
EN ISO 11699-2:2011 - Non-destructive testing - Industrial radiographic films - Part 2: Control of film processing by means of reference values (ISO 11699-2:1998)
Effective Date
08-Jun-2022

Buy Standard

EN ISO 11699-2:2018EN ISO 11699-2:2018
PreviousNext
Standard
EN ISO 11699-2:2018
English language
18 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 11699-2:2018
01-december-2018
1DGRPHãþD
SIST EN ISO 11699-2:2012
1HSRUXãLWYHQRSUHVNXãDQMH)LOPL]DLQGXVWULMVNRUDGLRJUDILMRGHO.RQWUROD
UD]YLMDQMDILOPRYVSRPRþMRUHIHUHQþQLKYUHGQRVWL ,62
Non-destructive testing - Industrial radiographic films - Part 2: Control of film processing
by means of reference values (ISO 11699-2:2018)
Zerstörungsfreie Prüfung - Industrielle Filme für die Durchstrahlungsprüfung - Teil 2:
Kontrolle der Filmverarbeitung mit Hilfe von Referenzwerten (ISO 11699-2:2018)
Essais non destructifs - Films utilisés en radiographie industrielle - Partie 2: Contrôle du
traitement des films au moyen de valeurs de référence (ISO 11699-2:2018)
Ta slovenski standard je istoveten z: EN ISO 11699-2:2018
ICS:
19.100 Neporušitveno preskušanje Non-destructive testing
37.040.25 Radiografski filmi Radiographic films
SIST EN ISO 11699-2:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 11699-2:2018

---------------------- Page: 2 ----------------------

SIST EN ISO 11699-2:2018


EN ISO 11699-2
EUROPEAN STANDARD

NORME EUROPÉENNE

September 2018
EUROPÄISCHE NORM
ICS 37.040.25 Supersedes EN ISO 11699-2:2011
English Version

Non-destructive testing - Industrial radiographic films -
Part 2: Control of film processing by means of reference
values (ISO 11699-2:2018)
Essais non destructifs - Films utilisés en radiographie Zerstörungsfreie Prüfung - Industrielle Filme für die
industrielle - Partie 2: Contrôle du traitement des films Durchstrahlungsprüfung - Teil 2: Kontrolle der
au moyen de valeurs de référence (ISO 11699-2:2018) Filmverarbeitung mit Hilfe von Referenzwerten (ISO
11699-2:2018)
This European Standard was approved by CEN on 3 August 2018.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 11699-2:2018 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 11699-2:2018
EN ISO 11699-2:2018 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 11699-2:2018
EN ISO 11699-2:2018 (E)
European foreword
This document (EN ISO 11699-2:2018) has been prepared by Technical Committee ISO/TC 135 "Non-
destructive testing" in collaboration with Technical Committee CEN/TC 138 “Non-destructive testing”
the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by March 2019, and conflicting national standards shall
be withdrawn at the latest by March 2019.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 11699-2:2011.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
T
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 14096-1:2020(Main)
Non-destructive testing - Qualification of radiographic film digitisation systems - Part 1: Definitions, quantitative measurements of image quality parameters, standard reference film and qualitative control (ISO 14096-1:2005)
SIST EN ISO 14096-1:2020

ISO 14096-1:2005 specifies procedures for the evaluation of basic performance parameters of the radiographic film digitisation process such as spatial resolution and spatial linearity, density range, density contrast sensitivity and characteristic transfer curve. They can be integrated into the system software and together with a standard reference film used for quality control of the digitisation process. This reference film provides a series of test targets for performance evaluation. The test targets are suitable for evaluating a digitisation system with a spatial resolution down to 25 micrometres, a density contrast sensitivity down to 0,02 optical density, a density range of 0,5 to 4,5 and a film size capacity of (350 x 430) mm2. This standard does not address signal processing and display of the digitised data.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 14096-2:2020(Main)
Non-destructive testing - Qualification of radiographic film digitisation systems - Part 2: Minimum requirements (ISO 14096-2:2005)
SIST EN ISO 14096-2:2020

ISO 14096-2:2005 specifies three film-digitisation quality classes for the requirements of non-destructive testing. The selected class depends on the radiation energy, penetrated material thickness and the quality level of the original radiographic film. ISO 14096-2:2005 does not address signal processing, display and storage of the digitised data.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 11699-1:2011(Main)
Non-destructive testing - Industrial radiographic film - Part 1: Classification of film systems for industrial radiography (ISO 11699-1:2008)
SIST EN ISO 11699-1:2012

The purpose of ISO 11699-1:2008 is to establish the performance of film systems.
ISO 11699-1:2008 is applicable for the classification of film systems in combination with specified lead screens for industrial radiography (non-destructive testing). ISO 11699-1:2008 is intended to ensure that the image quality of radiographs – as far as this is influenced by the film system – is in conformity with the requirements of International Standards such as ISO 5579, ISO 17636 and EN 12681.
ISO 11699-1:2008 does not apply to the classification of films used with fluorescent intensifying screens. The measurement of film systems in ISO 11699-1:2008 is restricted to a selected radiation quality to simplify the procedure. The properties of films will change with radiation energy, but not the ranking of film system quality.
Additional methods for evaluating the photographic process are described in ISO 11699-2, by which the performance of film systems can be controlled under the conditions given in industry.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 14096-1:2020(Main)
Non-destructive testing - Qualification of radiographic film digitisation systems - Part 1: Definitions, quantitative measurements of image quality parameters, standard reference film and qualitative control (ISO 14096-1:2005)
SIST EN ISO 14096-1:2020

ISO 14096-1:2005 specifies procedures for the evaluation of basic performance parameters of the radiographic film digitisation process such as spatial resolution and spatial linearity, density range, density contrast sensitivity and characteristic transfer curve. They can be integrated into the system software and together with a standard reference film used for quality control of the digitisation process. This reference film provides a series of test targets for performance evaluation. The test targets are suitable for evaluating a digitisation system with a spatial resolution down to 25 micrometres, a density contrast sensitivity down to 0,02 optical density, a density range of 0,5 to 4,5 and a film size capacity of (350 x 430) mm2. This standard does not address signal processing and display of the digitised data.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 14096-2:2020(Main)
Non-destructive testing - Qualification of radiographic film digitisation systems - Part 2: Minimum requirements (ISO 14096-2:2005)
SIST EN ISO 14096-2:2020

ISO 14096-2:2005 specifies three film-digitisation quality classes for the requirements of non-destructive testing. The selected class depends on the radiation energy, penetrated material thickness and the quality level of the original radiographic film. ISO 14096-2:2005 does not address signal processing, display and storage of the digitised data.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 3665:2013(Main)
Photography - Intra-oral dental radiographic film and film packets - Manufacturer specifications (ISO 3665:2011)
SIST EN ISO 3665:2013

ISO 3665:2011 establishes a system for the classification of intra-oral radiographic film by the speed of the film/process system and by the size of the film. It specifies the sensitometric characteristics of the film/process systems, the physical characteristics of the film and packets, and it describes packaging and labelling requirements.
ISO 3665:2011 is applicable to intra-oral dental radiographic film for manual or automatic processing. It does not apply to films intended to be exposed with fluorescent intensifying screens, or films intended to be viewed primarily by reflected light.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 11699-1:2011(Main)
Non-destructive testing - Industrial radiographic film - Part 1: Classification of film systems for industrial radiography (ISO 11699-1:2008)
SIST EN ISO 11699-1:2012

The purpose of ISO 11699-1:2008 is to establish the performance of film systems.
ISO 11699-1:2008 is applicable for the classification of film systems in combination with specified lead screens for industrial radiography (non-destructive testing). ISO 11699-1:2008 is intended to ensure that the image quality of radiographs – as far as this is influenced by the film system – is in conformity with the requirements of International Standards such as ISO 5579, ISO 17636 and EN 12681.
ISO 11699-1:2008 does not apply to the classification of films used with fluorescent intensifying screens. The measurement of film systems in ISO 11699-1:2008 is restricted to a selected radiation quality to simplify the procedure. The properties of films will change with radiation energy, but not the ranking of film system quality.
Additional methods for evaluating the photographic process are described in ISO 11699-2, by which the performance of film systems can be controlled under the conditions given in industry.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 4090:2004(Main)
Photography - Medical radiographic cassettes/screens/films and hard-copy imaging films - Dimensions and specifications (ISO 4090:2004)
SIST EN ISO 4090:2004

This International Standard specifies the nominal sizes, aim dimensions with tolerances, weights, and certain tests
for medical radiographic cassettes, screens, and films. It includes medical hard-copy imaging films in the form of
sheets, such as laser films and video.
This International Standard also includes information regarding the appropriate marking of these products, and
special attention is given to cassettes/screens/films used for mammography.
This International Standard does not include films in roll format (see informative annex A).

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 22435:2024(Main)
Gas cylinders - Cylinder valves with integrated pressure regulators - Specification and type testing (ISO 22435:2024)
kSIST FprEN ISO 22435:2024

This document specifies design, type test methods, marking and instruction requirements for cylinder valves with integrated pressure regulators (VIPRs) intended to be fitted to gas cylinders, pressure drums or tubes or used as a main valve for bundles of cylinders that convey compressed, liquefied or dissolved gases.
These are requirements for VIPRs that are in addition to those given in the relevant closure standard, for example, in ISO 10297 for cylinder valves, in ISO 17871 for quick-release cylinder valves, in ISO 17879 for self-closing cylinder valves or in ISO 23826 for ball valves. For ISO 17871, these requirements are only applicable to quick-release cylinder valves types B, C, D and E.
NOTE 1        If the pressure regulating system of a VIPR is acting as the primary valve operating mechanism, it is covered by the relevant closure standard, e.g. ISO 10297, ISO 17871, ISO 17879 and ISO 23826. This also includes designs where closure of the primary valve operating mechanism of a VIPR is obtained by closing the seat of the pressure regulating system.
NOTE 2        If the primary valve operating mechanism of a VIPR is located at the low-pressure side of the pressure regulating system, it is covered by the relevant closure standard, e.g. ISO 10297, ISO 17871, ISO 17879 and ISO 23826.
NOTE 3        The term “pressure receptacle” is used within this document to cover instances where no differentiation is necessary between gas cylinders, bundles of cylinders, pressure drums and tubes.
This document does not apply to VIPRs for
a)       medical applications (see ISO 10524-3);
b)       liquefied petroleum gas (LPG);
c)        cryogenic applications.
NOTE 4        Additional requirements for a VIPR with a residual pressure device (RPD) are specified in ISO 15996.
NOTE 5        Additional requirements for pressure relief valves can exist in international/regional regulations/ standards.

  • Draft
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17015-1:2024(Main)
Electronic Public Procurement - Catalogue - Part 1: Choreographies
kSIST FprEN 17015-1:2024

The purpose of this deliverable is to specify and describe choreographies for exchanging an electronic product catalogue (“catalogues”) as part of the business processes in the pre-award and post-award area, so that catalogues can serve as a basis for placing orders as well as evaluating tenders. The key aspects covered by this choreography specification are:
-   processes for submitting catalogues from the selling to the buying side;
-   processes for submitting catalogue-related data as part of a tendering process;
-   processes integrating sell-side procurement systems.
This document does not apply to the transactions used in the specified choreographies. These transactions are specified in EN 17015 2. The relationship between the choreographies and the transaction is described in Clause 8.
The identifier of this choreographies document is EN 17015 1:2024.
How to claim compliance to this choreography is specified in 6.2.3.

  • Draft
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day