prEN 754-2
(Main)Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 2: Mechanical properties
Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 2: Mechanical properties
This document specifies the mechanical property limits resulting from tensile testing applicable to aluminium and aluminium alloy cold drawn rod/bar and tube.
Technical conditions for inspection and delivery, including product and testing requirements, are specified in EN 754-1. Temper designations are defined in EN 515. The chemical composition limits for these materials are given in EN 573-3.
Aluminium und Aluminiumlegierungen - Gezogene Stangen und Rohre - Teil 2: Mechanische Eigenschaften
Dieses Dokument legt die Grenzwerte für die mechanischen Eigenschaften von gezogenen Stangen und Rohren aus Aluminium und Aluminiumlegierungen fest.
Die technischen Lieferbedingungen, einschließlich Erzeugnis- und Prüfanforderungen, sind in EN 754-1 festgelegt. Die Bezeichnungen der Werkstoffzustände sind in EN 515 definiert. In EN 573-3 sind die Grenzen der chemischen Zusammensetzung für diese Werkstoffe angegeben.
Aluminium et alliages d’aluminium - Barres et tubes étirés - Partie 2 : Caractéristiques mécaniques
Le présent document spécifie les limites des caractéristiques mécaniques provenant de l’essai de traction applicables aux barres et tubes étirés en aluminium et alliages d’aluminium.
Les conditions techniques de contrôle et de livraison, y compris les exigences relatives aux produits et aux essais, sont spécifiées dans l’EN 754-1. La désignation des états métallurgiques est définie dans l’EN 515. Les limites de composition chimique de ces matériaux sont données dans l’EN 573-3.
Aluminij in aluminijeve zlitine - Hladno vlečene palice/drogovi in cevi - 2. del: Mehanske lastnosti
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN 754-2:2023
01-julij-2023
Aluminij in aluminijeve zlitine - Hladno vlečene palice/drogovi in cevi - 2. del:
Mehanske lastnosti
Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 2: Mechanical
properties
Aluminium und Aluminiumlegierungen - Gezogene Stangen und Rohre - Teil 2:
Mechanische Eigenschaften
Aluminium et alliages d'aluminium - Barres et tubes étirés - Partie 2: Caractéristiques
mécaniques
Ta slovenski standard je istoveten z: prEN 754-2
ICS:
77.150.10 Aluminijski izdelki Aluminium products
oSIST prEN 754-2:2023 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 754-2:2023
---------------------- Page: 2 ----------------------
oSIST prEN 754-2:2023
DRAFT
EUROPEAN STANDARD
prEN 754-2
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2023
ICS 77.150.10 Will supersede EN 754-2:2016
English Version
Aluminium and aluminium alloys - Cold drawn rod/bar
and tube - Part 2: Mechanical properties
Aluminium et alliages d'aluminium - Barres et tubes Aluminium und Aluminiumlegierungen - Gezogene
étirés - Partie 2: Caractéristiques mécaniques Stangen und Rohre - Teil 2: Mechanische Eigenschaften
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 132.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 754-2:2023 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 754-2:2023
prEN 754-2:2023 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Mechanical property limits . 4
4.1 General . 4
4.2 Elongation . 4
4.3 Detailed tables of mechanical properties . 5
Annex A (informative) List of tempers used in Tables 1 to 40 . 37
Bibliography . 39
2
---------------------- Page: 4 ----------------------
oSIST prEN 754-2:2023
prEN 754-2:2023 (E)
European foreword
This document (prEN 754-2:
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.