EN 13684:2018/FprA1
(Amendment)Garden equipment - Pedestrian controlled lawn aerators and scarifiers - Safety
Garden equipment - Pedestrian controlled lawn aerators and scarifiers - Safety
This European Standard specifies safety requirements and their verification for the design and construction of pedestrian controlled internal combustion engine powered lawn aerators and scarifiers which are designed for re-generating lawns by, for instance, combing out grass, thatch and moss or cutting vertically into the lawn face using tines which rotate about a horizontal axis. It describes methods of elimination or reduction of hazards arising from their use. In addition, it specifies the type of information to be provided by the manufacturer on safe working practices.
Throughout this document, the term "machine" applies to those machines known as aerators, scarifiers, corers, lawn rakes or grass rakes.
It does not apply to:
- aerators/scarifiers made from a machine falling within the scope of EN 709:1997+A4:2009 when fitted with an aerating/scarifying implement;
- non-powered aerators;
- vertical axis aerators; or
- those aerators which cut into the soil by means of a reciprocating motion or by water pressure.
It deals with all significant hazards, hazardous situations and events relevant to scarifiers and aerators, when they are used as intended and under the conditions foreseeable by the manufacturer (see Clause 4). Environmental hazards have not been considered in this document.
This document is not applicable to aerators/scarifiers which are manufactured before the date of its publication.
Gartengeräte - Handgeführte Rasen-Bodenbelüfter und Vertikutierer - Sicherheit
Diese Europäische Norm legt sicherheitstechnische Anforderungen und Prüfungen für die Gestaltung und Konstruktion von handgeführten motorgetriebenen Vertikutierern und Rasen-Bodenbelüftern fest, die zur Regenierung von Rasen, z. B. Auskämmen von Gras, Rasenfilz und Moos, oder vertikales Einschneiden der Rasenfläche mit Hilfe von sich um eine horizontale Achse drehenden Arbeitswerkzeug verwendet werden. Sie legt Maßnahmen zur Vermeidung oder Minderung der sich aus dem Gebrauch ergebenden Gefährdungen fest. Außerdem gibt sie Informationen über sicheres Arbeiten, die vom Hersteller zur Verfügung zu stellen sind.
In diesem Dokument bezieht sich der Begriff "Maschine" auf solche Maschinen, die als Vertikutierer, Bodenbelüfter, Boden(aus)stecher, Rasen- oder Grasrechen bekannt sind.
Es gilt nicht für
- Vertikutierer/Bodenbelüfter, die aus einer in den Anwendungsbereich der EN 709:1997+A4:2009 fallenden Maschine entstanden, wenn sie mit einem Anbau zum Bodenvertikutieren/-belüften ausgestattet sind,
- nicht motorgetriebene Bodenbelüfter,
- Bodenbelüfter mit vertikaler Achse oder
- Bodenbelüfter, die den Boden durch Hin- und Herbewegung oder Wasserdruck schneiden.
Es behandelt alle signifikanten Gefährdungen, Gefährdungssituationen und Gefährdungsereignisse für Bodenbelüfter und Vertikutierer, sofern sie unter den vorgegebenen Zweck und unter den vom Hersteller vorgesehenen Bedingungen eingesetzt werden (siehe Abschnitt 4). Die Gefährdung der Umwelt wird in diesem Dokument nicht in Betracht gezogen.
Dieses Dokument gilt nicht für Vertikutierer/Bodenbelüfter, die vor dem Datum der Veröffentlichung hergestellt wurden.
Matériel de jardinage - Aérateurs et scarificateurs à conducteur à pied - Sécurité
La présente Norme européenne spécifie les prescriptions de sécurité et leurs vérifications pour la conception et la construction. Elle est applicable aux aérateurs et des scarificateurs à moteur à combustion interne à conducteur à pied conçus pour permettre au gazon d'être régénéré, par exemple par le ratissage de l'herbe, du chaume et de la mousse ou la coupe verticale de la surface du gazon par l'utilisation de dents qui tournent autour d'un axe horizontal.
Ce document traite de tous les phénomènes dangereux importants, situations dangereuses ou événements dangereux concernant les aérateurs et les scarificateurs à moteur à combustion interne, lorsqu'ils sont utilisés comme prévu et dans des mauvaises conditions d'utilisation qui sont raisonnablement prévisibles par le fabricant. Il décrit les méthodes pour éliminer ou réduire les phénomènes dangereux inhérents à leur utilisation. En outre, il spécifie le type d'informations que le fabricant doit donner sur les pratiques d'utilisation sûres.
Dans l'intégralité du présent document, le terme « machine » s'applique aux machines connues comme étant des aérateurs, des scarificateurs, des extracteurs, des râteaux pour gazon ou herbe.
Elle ne s'applique pas aux :
- aérateurs/scarificateurs fabriqués à partir d’une machine relevant du domaine d'application de l'EN 709:1997+A4:2009 lorsqu'ils sont équipés d'un outil d'aération/scarification ;
- aérateurs sans source de puissance ;
- aérateurs à axe vertical ; ou
- les aérateurs à axe vertical ou travaillant le sol au moyen d'un mouvement alternatif ou de la pression de l'eau.
Les phénomènes dangereux liés à l’environnement ne sont pas couverts par le présent document.
Le présent document ne s’applique pas aux aérateurs/scarificateurs fabriqués avant sa date de publication.
Oprema za nego vrta - Ročno upravljani prezračevalniki travne ruše in rahljalniki zemlje - Varnost - Dopolnilo A1
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 13684:2018/oprA1:2020
01-september-2020
Oprema za nego vrta - Ročno upravljani prezračevalniki travne ruše in rahljalniki
zemlje - Varnost - Dopolnilo A1
Garden equipment - Pedestrian controlled lawn aerators and scarifiers - Safety
Gartengeräte - Handgeführte Rasen-Bodenbelüfter und Vertikutierer - Sicherheit
Matériel de jardinage - Aérateurs et scarificateurs à conducteur à pied - Sécurité
Ta slovenski standard je istoveten z: EN 13684:2018/prA1
ICS:
65.060.70 Vrtnarska oprema Horticultural equipment
SIST EN 13684:2018/oprA1:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
SIST EN 13684:2018/oprA1:2020
SIST EN 13684:2018/oprA1:2020
DRAFT
EUROPEAN STANDARD
EN 13684:2018
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA1
July 2020
ICS 65.060.70
English Version
Garden equipment - Pedestrian controlled lawn aerators
and scarifiers - Safety
Matériel de jardinage - Aérateurs et scarificateurs à Gartengeräte - Handgeführte Rasen-Bodenbelüfter und
conducteur à pied - Sécurité Vertikutierer - Sicherheit
This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 144.
This draft amendment A1, if approved, will modify the European Standard EN 13684:2018. If this draft becomes an amendment,
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration.
This draft amendment was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13684:2018/prA1:2020 E
worldwide for CEN national Members.
SIST EN 13684:2018/oprA1:2020
EN 13684:2018/prA1:2020 (E)
Contents Page
European foreword . 3
1 Modification to 5.13.2.2, Test equipment . 4
2 Modification to 5.13.2.3, Test method . 5
3 Modification to 5.18.2, Stability test procedure . 5
4 Modification to B.2.2, Preparation . 5
5 Modification to C.6, Measurement uncertainty . 5
6 Modification to E.4, Test procedure . 6
7 Modification to Annex ZA . 7
Annex ZA (informative) Relationship between this European Standard and the essential
requirements of Directive 2006/42/EC aimed to be covered . 8
SIST EN 13684:2018/oprA1:2020
EN 13684:2018/prA1:2020 (E)
European foreword
This document (EN 13684:2018/prA1:2020) has been prepared by Technical Committee CEN/TC 144
“Tractors and machinery for agriculture and forestry”, the secretariat of which is held by AFNOR.
This document is currently submitted to the CEN Enquiry.
This document has been prepared under a standardization request given to CEN by the European
Commission and the European Free Trade Association, and supports essential requirements of
EU Directive(s).
For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this
document.
SIST EN 13684:2018/oprA1:2020
EN 13684:2018/prA1:2020 (E)
1 Modification to 5.13.2.2, Test equipment
Replace Figure 6 with the following: "
Dimensions in millimetres
Key
1 operator target area 1 000 mm wide × 2 000 mm high. a (18 ± 1) mm
Material: Kraft paper 225 g/m
2 mixture of sand and gravel (50:50) b minimal distance
3 base (supporting frame) c diameter of tine tip circle + 10 mm
SIST EN 13684:2018/oprA1:2020
EN 13684:2018/prA1:2020 (E)
4 frame (loose) d at least equal to the width of cut
5 tray
Figure 6 — Thrown object test rig for rear discharge scarifiers with rigid tines”
2 Modification to 5.13.2.3, Test method
Add a new paragraph at the end of the subclause to read:
"The distance “b” in Figure 6 between the base of the operator target area and the rear of the machine is
necessary to allow the tray to fully move underneath the length of the machine deck. The settings of the
machine shall allow this distance to be minimal.".
3 Modification to 5.18.2, Stability test procedure
Replace the text of 5.18.2 with the following: "
5.18.2.1 Preparation
5.18.2.1.1 Ballast and tanks
No ballast, except as required for normal operation, shall be added to the machine. Scarifier attachments
and tine assemblies shall be placed in its most unfavourable position allowed by the instruction
handbook. Any fluid tanks shall be either full or empty, whichever is the most unfavourable condition.
5.18.2.1.2 Tyres
The machine shall be equipped with the tyre size and wheel track-width setting that gives the most
unfavourable test condition. Pneumatic tyres shall be inflated to the maximum pressure recommended
in the instruction handbook for normal operation. Stability requirements shall apply for all tyre
combinations at all wheel track-width settings recommended in the instruction handbook.
5.18.2.2 Testing
Place the machine in any normal position of use on a place inclined at an angle of 10° to the horizontal. If,
however, the machine is such that, were it to be tilted through an angle of 10° when standing on a
horizontal plane, a part of it not normally in contact with the supporting surface would touch the
horizontal plane, the machine is placed on a horizontal support and tilted in the most unfavourable
direction through an angle of 10°. For the test the machine is prevented from sliding.
5.18.2.3 Test acceptance
The machine shall not tip over or the requirements for single axle machines shall be fulfilled.".
4 Modification to B.2.2, Preparation
Replace the text of l) with the following:
“reinsert all fuel tanks and container caps securely”.
5 Modification to C.6, Measurement uncertainty
Replace the text with the following:
"When measuring the emissi
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.