CEN/TC 144/WG 7 - Garden equipment

This document provides additional national and regional requirements applicable to combustion engine powered pedestrian-controlled and ride-on snow throwers. It is intended to be used with ISO 8437-1, ISO 8437-2 and ISO 8437-3 to achieve the full requirements and means for pedestrian-controlled and ride-on snow throwers.
The ISO 8437 series deals with significant hazards, hazardous situations and events relevant to snow throwers used as intended and under the conditions reasonably foreseeable by the manufacturer.
It does not apply to the following:
—         electrically powered and battery powered snow throwers;
—         hand-held snow throwers;
—         airport or highway snow removal machines and equipment;
—         machines intended for use in potentially explosive atmospheres.
It does not deal with hazards related to the following:
—         battery circuits exceeding 42 V;
—         mains connected starting motor;
—         magneto grounding circuits;
—         working environment;
—         electromagnetic compatibility.
The ISO 8437 series is not applicable to machines that were manufactured before the date of its publication.

This document specifies safety requirements applicable to combustion engine powered ride-on snow throwers. It is intended to be used with ISO 8437-1 and ISO 8437-4 to achieve the full requirements and means for ride-on snow throwers.
The ISO 8437 series deals with significant hazards, hazardous situations and events relevant to snow throwers used as intended and under the conditions reasonably foreseeable by the manufacturer.
It does not apply to the following:
—         electrically powered and battery powered snow throwers;
—         hand-held snow throwers;
—         airport or highway snow removal machines and equipment;
—         machines intended for use in potentially explosive atmospheres.
It does not deal with hazards related to the following:
—         battery circuits exceeding 42 V;
—         mains connected starting motor;
—         magneto grounding circuits;
—         working environment;
—         electromagnetic compatibility.
The ISO 8437 series is not applicable to machines that were manufactured before the date of its publication.

This document defines terms and definitions and common test methods applicable to combustion engine powered pedestrian-controlled and ride-on snow throwers. It is intended to be used with ISO 8437-2, ISO 8437-3 and ISO 8437-4 to achieve the full requirements and means of verification for pedestrian-controlled and ride-on snow throwers.
The ISO 8437 series deals with significant hazards, hazardous situations and events relevant to snow throwers used as intended and under the conditions reasonably foreseeable by the manufacturer.
It does not apply to the following:
—          electrically powered and battery powered snow throwers;
—          hand-held snow throwers;
—          airport or highway snow removal machines and equipment;
—          machines intended for use in potentially explosive atmospheres.
It does not deal with hazards related to the following:
—          battery circuits exceeding 42 V;
—          mains connected starting motor;
—          magneto grounding circuits;
—          working environment;
—          electromagnetic compatibility.
The ISO 8437 series is not applicable to machines that were manufactured before the date of its

This document specifies safety requirements applicable to combustion engine powered pedestrian-controlled snow throwers. It is intended to be used with ISO 8437-1 and ISO 8437-4 to achieve the full requirements and means of verification for pedestrian-controlled snow throwers.
The ISO 8437 series deals with significant hazards, hazardous situations and events relevant to snow throwers used as intended and under the conditions reasonably foreseeable by the manufacturer.
It does not apply to the following:
—         electrically powered and battery powered snow throwers;
—         hand-held snow throwers;
—         airport or highway snow removal machines and equipment;
—         machines intended for use in potentially explosive atmospheres.
It does not deal with hazards related to the following:
—         battery circuits exceeding 42 V;
—         mains connected starting motor;
—         magneto grounding circuits;
—         working environment;
—         electromagnetic compatibility.
The ISO 8437 series is not applicable to machines that were manufactured before the date of its publication.

This document specifies safety requirements and measures for the verification of the design and construction of hand-held, integrally-driven combustion engine hedge trimmers (hereafter referred to as "hedge trimmers") designed to be used by a single operator for trimming hedges and bushes while utilizing one or more linear reciprocating cutter blades.
This document is also applicable to "split-boom" type hedge trimmers and to multi-purpose machines when configured as a hedge trimmer.
It establishes methods for the elimination or reduction of hazards arising from the use of the hedge trimmers. In addition, it specifies the type of information to be provided by the manufacturer on safe working practices.
This document deals with all significant hazards, hazardous situations and events relevant to powered hand-held hedge trimmers when they are used as intended and under the conditions of misuse that are reasonably foreseeable by the manufacturer (see Clause 4).
This document is not applicable to hedge trimmers with an engine displacement over 80 cm3, nor is it applicable to hedge trimmers manufactured before the date of its publication.

This European Standard specifies safety requirements and their verification for the design and construction of pedestrian controlled internal combustion engine powered lawn aerators and scarifiers which are designed for re-generating lawns by, for instance, combing out grass, thatch and moss or cutting vertically into the lawn face using tines which rotate about a horizontal axis. It describes methods of elimination or reduction of hazards arising from their use. In addition, it specifies the type of information to be provided by the manufacturer on safe working practices.
Throughout this document, the term "machine" applies to those machines known as aerators, scarifiers, corers, lawn rakes or grass rakes.
It does not apply to:
-   aerators/scarifiers made from a machine falling within the scope of EN 709:1997+A4:2009 when fitted with an aerating/scarifying implement;
-   non-powered aerators;
-   vertical axis aerators; or
-   those aerators which cut into the soil by means of a reciprocating motion or by water pressure.
It deals with all significant hazards, hazardous situations and events relevant to scarifiers and aerators, when they are used as intended and under the conditions foreseeable by the manufacturer (see Clause 4). Environmental hazards have not been considered in this document.
This document is not applicable to aerators/scarifiers which are manufactured before the date of its publication.

This European Standard specifies the safety requirements and their verification for the design and construction of hand-held combustion engine powered and back-pack combustion engine powered, garden vacuums and garden blower/vacuums with or without shredding means and garden blowers, designed for one operator only. In addition, it specifies the type of information on safe working practices (including residual risks) to be provided by the manufacturer.
Throughout this European Standard the term 'machine' is used to mean all the types of garden blowers and vacuums covered by it.
This European Standard deals, except for vibration of backpack machines, with all hazards, hazardous situations and events relevant to these machines when they are used as intended and under the conditions foreseen by the manufacturer (see Clause 4).
This European Standard is not applicable to:
- walk-behind, hand-guided (support-wheeled) and ride-on machines;
- mains driven and battery powered blowers and vacuums of combinations thereof;
NOTE   EN 60335-1 [1] and IEC 60335-2-100 [2] give the safety requirements for mains driven blowers and blower vacuums, vacuum cleaners for household and industrial use.
- structural integrity test for blowers and blower vacuums;
- strength test for harnesses and back-pack supports.
This European Standard is not applicable to machines which are manufactured before the date of its publication a

ISO 5395-2:2013 specifies safety requirements and their verification for combustion-engine-powered pedestrian-controlled (with or without sulky) rotary lawnmowers and cylinder lawnmowers (hereafter named "lawnmower"), and equipped with: metallic cutting means; and/or non-metallic cutting means with one or more cutting elements pivotally mounted on a generally circular drive unit, where these cutting elements rely on centrifugal force to achieve cutting, and have a kinetic energy for each single cutting element of 10 J or more.
It does not apply to: robotic and remote-controlled lawnmowers, flail mowers, grassland mowers, sickle bar mowers, towed/semi-mounted grass-cutting machines, and scrub-clearing machines; electrically powered and battery-powered lawnmowers; pedestrian-controlled lawnmowers with a swing-over handle.
Note that IEC 60335-1 together with IEC 60335-2-77 give requirements for pedestrian-controlled walk-behind electrically powered lawnmowers.
ISO 5395-2:2013 deals with all significant hazards, hazardous situations or events relevant to lawnmowers when used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer.
It is not applicable to lawnmowers which are manufactured before the date of publication of this document.

ISO 5395-3:2013 specifies safety requirements and their verification for combustion-engine-powered ride-on (seated) rotary lawnmowers and cylinder lawnmowers (hereafter named "lawnmower"), and equipped with: metallic cutting means; and/or non-metallic cutting means with one or more cutting elements pivotally mounted on a generally circular drive unit, where these cutting elements rely on centrifugal force to achieve cutting, and have a kinetic energy for each single cutting element of 10 J or more.
It does not apply to: robotic and remote-controlled lawnmowers, flail mowers, grassland mowers, sickle bar mowers, towed/semi-mounted grass-cutting machines, and scrub-clearing machines; cutting-means assembly when used in combination with an agricultural tractor; electrically powered and battery-powered lawnmowers.
ISO 5395-3:2013 deals with all significant hazards, hazardous situations or events relevant to lawnmowers when used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer.
It is not applicable to lawnmowers which are manufactured before the date of publication of this document.

ISO 5395-1:2013 specifies terminology and common test methods used for verification of safety requirements for combustion engine powered rotary lawnmowers and cylinder lawnmowers including pedestrian-controlled (with or without sulky) and ride-on types (hereafter named "lawnmower"), and equipped with: metallic cutting means and/or; non-metallic cutting means with one or more cutting elements pivotally mounted on a generally circular drive unit, where these cutting elements rely on centrifugal force to achieve cutting, and have a kinetic energy for each single cutting element of 10 J or more.
It does not apply to: robotic and remote-controlled lawnmowers, flail mowers, grassland mowers, sickle bar mowers, towed/semi-mounted grass cutting machines, and scrub-clearing machines; cutting-means assembly when used in combination with an agricultural tractor; electrically powered and battery-powered lawnmowers.
Note that IEC 60335-1 together with IEC 60335-2-77, give requirements for pedestrian-controlled walk-behind electrically powered lawnmowers.
ISO 5395-1:2013 is not applicable to lawnmowers which are manufactured before the date of publication of this document.

CEN/TC 144 Corrigendum - Editorial modification to 5.2.1.3.

This European Standard specifies safety requirements and their verification for the design and construction of hand fed, shredders/chippers with integral power source and with or without vacuum assisted collection which are designed primarily to reduce organic material to smaller pieces. It is only applicable to shredders/chippers that are designed for use outdoors in a stationary position by an operator standing on the ground. This standard applies to shredders/chippers with feed intake openings or segments, in this standard referred to as feed safety openings and being of any shape complying with the safety distance requirements of this standard with regard to contact with the cutting means, that in total will fit into a square of 250 mm x 250 mm measured at the plane of the opening(s).
This standard describes methods of elimination or reduction of hazards arising from the use of shredders/chippers. In addition it specifies the type of information to be provided by the manufacturer on safe working practices.
This standard does not cover requirements for:
-   units driven by an external power source;
-   mobile use of units which can be used in both stationary and mobile modes;
-   units with powered discharge intended to broadcast material or load vehicles;
-   units with separate mechanically powered feed intake or attachments;
-   units with cutting means of either one or more non-metallic filaments, or one or more non-metallic cutting elements pivotally mounted on a generally circular central drive unit, where these cutting elements rely on centrifugal force to achieve cutting, and have a kinetic energy for each single cutting means of less than 10 J;
-   electrical powered and battery-powered shredders/chippers.
Environmental hazards and EMC have not been considered in this standard.
This standard deals with all significant hazards, hazardous situations and events relevant to shredders/chippers, when they are used as intended (see clause 4).
This document is

This European Standard deals with all significant hazards, hazardous situations and events relevant to walk-behind trimmers, powered by a combustion engine, with cutting means using non-metallic filament line or freely pivoting non-metallic cutter(s), of which the cutting elements rely on centrifugal force to achieve cutting with the kinetic energy of a single cutting element not exceeding 10 J, designed for cutting grass or similar plant material, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4).
This European Standard is not applicable to:
a)   walk-behind trimmers with cutting means other than those described above;
b)   self propelled walk-behind trimmers or walk-behind edge trimmers;
c)   lawnmowers using non-metallic filament line or freely pivoting non-metallic cutting elements with greater than 10 J kinetic energy;
NOTE 1    EN 836 applies for machines using non-metallic filament line or freely pivoting non-metallic cutting elements with greater than 10 J kinetic energy.
d)   motor mowers using metal or other solid cutting elements.
NOTE 2   EN 12733 applies for machines using metal or other solid cutting elements.
EMC and environmental hazards other than noise have not been considered in this European Standard.
This European Standard is not applicable to walk-behind trimmers which are manufactured before the date of its publication as EN.
NOTE 3   Lawn trimmers and lawn edge trimmers (electric powered) are dealt with in EN 786, grass trimmers (internal combustion engine powered) are dealt with in EN 11806 and lawn mowers (internal combustion engine powered) are dealt with in EN 836.

This European Standard specifies safety requirements and their verification for the design and construction of pedestrian controlled internal combustion engine powered lawn aerators and scarifiers which are designed for re-generating lawns by, for instance, combing out grass, thatch and moss or cutting vertically into the lawn face using tines which rotate about a horizontal axis. It describes methods of elimination or reduction of hazards arising from their use. In addition, it specifies the type of information to be provided by the manufacturer on safe working practices.
Throughout this document, the term "machine" applies to those machines known as aerators, scarifiers, corers, lawn rakes or grass rakes.
It does not apply to:
-   aerators/scarifiers made from a machine falling within the scope of EN 709:1997+A4:2009 when fitted with an aerating/scarifying implement;
-   non-powered aerators;
-   vertical axis aerators; or
-   those aerators which cut into the soil by means of a reciprocating motion or by water pressure.
It deals with all significant hazards, hazardous situations and events relevant to scarifiers and aerators, when they are used as intended and under the conditions foreseeable by the manufacturer (see Clause 4). Environmental hazards have not been considered in this document.
This document is not applicable to aerators/scarifiers which are manufactured before the date of its publication.

Requirements for preventing accessibility to the inlet and discharge opening of garden blowers, vacuums and blowers/vacuums - Amendment on accessibility

This amendment refers to changes in 5.2.1 "Feed safety openings", 5.2.2 "Discharge chutes", 5.2.3.1 "Attachment", D.2.3 (9) and new Annex A "Examples of inlet openings where the safety distance is >= 200 mm".
Text of mother standard:
This European Standard specifies safety requirements and their verification for the design and construction of hand fed, shredders/chippers with integral power source and with or without vacuum assisted collection which are designed primarily to reduce organic material to smaller pieces. It is only applicable to shredders/chippers that are designed for use outdoors in a stationary position by an operator standing on the ground. It applies to shredders/chippers with feed intake openings in the form of a single opening or an opening divided into a number of segments. The feed intake openings or segments each being of any shape that will fit into a square of 250 mm - 250 mm measured at the relevant safety distance to the cutting means.
NOTE   Feed safety openings are limited to 250 mm - 250 mm but the total feed intake opening can be any size.
This standard describes methods of elimination or reduction of hazards arising from the use of shredders/chippers. In addition it specifies the type of information to be provided by the manufacturer on safe working practices.
This standard does not cover requirements for:
-   units driven by an external power source;
-   mobile use of units which can be used in both stationary and mobile modes;
-   units with powered discharge intended to broadcast material or load vehicles;
-   units with mechanically powered feed intake or attachments;
-   units with cutting means of either one or more non-metallic filaments, or one or more non-metallic cutting elements pivotally mounted on a generally circular central drive unit, where these cutting elements rely on centrifugal force to achieve cutting, and have a kinetic energy for each single cutting means of less than 10 J;
-   electrical aspects of electrically

This International Standard specifies safety requirements and their verification for the design and construction of hand-held, integrally-driven petrol combustion engine hedge trimmers, hereafter referred to as “hedge trimmers”, designed to be used by a single operator for trimming hedges and bushes while utilizing one or more linear reciprocating cutter blades. It establishes methods for the elimination or reduction of hazards arising from the use of the trimmers. In addition, it specifies the type of information to be provided by the manufacturer on safe working practices. This International Standard deals with all significant hazards, hazardous situations and events relevant to hand-held powered hedge trimmers when they are used as intended (see Clause 4). This International Standard does not deal with low noise design. It is not applicable to hedge trimmers with an engine displacement over 80 cm3, nor is it applicable to hedge trimmers manufactured before the date of its publication.

ISO 10517:2009 specifies safety requirements and their verification for the design and construction of hand-held, integrally-driven petrol combustion engine hedge trimmers designed to be used by a single operator for trimming hedges and bushes while utilizing one or more linear reciprocating cutter blades.
It establishes methods for the elimination or reduction of hazards arising from the use of the trimmers. In addition, it specifies the type of information to be provided by the manufacturer on safe working practices.
It deals with all significant hazards, hazardous situations and events relevant to hand-held powered hedge trimmers when they are used as intended.
It does not deal with low noise design. It is not applicable to hedge trimmers with an engine displacement over 80 cm3, nor to hedge trimmers manufactured before the date of its publication.

This European Standard specifies safety requirements and their verification for the design and construction of pedestrian controlled integrally powered lawn aerators and scarifiers which are designed for re-generating lawns by, for instance, combing out grass, thatch and moss or cutting vertically into the lawn face using tines which rotate about a horizontal axis. It describes methods of elimination or reduction of hazards arising from their use. In addition, it specifies the type of information to be provided by the manufacturer on safe working practices.
Throughout this standard, the term "machine" applies to those machines known as aerators, scarifiers, corers, lawn rakes or grass rakes.
This standard does not apply to aerators/scarifiers made from a machine falling within the scope of EN 709:1997 when fitted with an aerating/scarifying implement, non-powered aerators, vertical axis aerators or those aerators which cut into the soil by means of a reciprocating motion or by water pressure. The electrical aspects of mains operated machines are covered by EN 60335-1. The safety aspects of batteries other than batteries for starting the engine and the electrical safety aspects of battery powered lawn aerators and scarifiers are not covered by this standard.
This standard deals with all significant hazards, hazardous situations and events relevant to scarifiers and aerators, when they are used as intended and under the conditions foreseen by the manufacturer (see Clause 4).
Environmental hazards and EMC have not been considered in this standard.
This document is not applicable to aerators/scarifiers which are manufactured before the date of publication of this document by CEN.

This European Standard specifies mechanical safety requirements and testing for the design and construction of electrically powered walk-behind and hand-held lawn trimmers and lawn edge trimmers, with cutting element(s) of non-metallic filament line or freely pivoting non-metallic cutter(s) with a kinetic energy of not more that 10 J each, and used by a standing operator primarily for cutting grass.
It describes methods for the elimination or reduction of hazards arising from their use. In addition, it specifies the type of information to be provided by the manufacturer on safe working practices.
This standard is not applicable to:
a)   Scissor type or lawn trimmers and lawn edge trimmers with cutting means other than those described above;
b)   Self-propelled lawn trimmers or lawn edge trimmers;
c)   Lawn trimmers or lawn edge trimmers which do not have a distance of at least 600 mm between the cutting means control and the cutting head.
The electrical aspects of electrically powered lawn trimmers and lawn edge trimmers are not covered by this standard.
The list of significant hazards dealt with in this standard is given in annex A. Annex A also indicates the hazards which have not been dealt with.
Environmental aspects have not been considered in this standard.
This European Standard applies primarily to machines which are manufactured after the date of issue of this standard.
NOTE   The method of calculating the kinetic energy for the purposes of this standard is given in annex B.

This European Standard specifies the safety requirements and their verification for the design and construction of hand-held combustion engine powered and back-pack combustion engine powered, garden vacuums and garden blower/vacuums with or without shredding means and garden blowers, designed for one operator only. In addition, it specifies the type of information on safe working practices (including residual risks) to be provided by the manufacturer.
Throughout this European Standard the term 'machine' is used to mean all the types of garden blowers and vacuums covered by it.
This European Standard deals, except for vibration of backpack machines, with all hazards, hazardous situations and events relevant to these machines when they are used as intended and under the conditions foreseen by the manufacturer (see Clause 4).
This European Standard is not applicable to:
- walk-behind, hand-guided (support-wheeled) and ride-on machines;
- mains driven and battery powered blowers and vacuums of combinations thereof;
NOTE   EN 60335-1 [1] and IEC 60335-2-100 [2] give the safety requirements for mains driven blowers and blower vacuums, vacuum cleaners for household and industrial use.
- structural integrity test for blowers and blower vacuums;
- strength test for harnesses and back-pack supports.
This European Standard is not applicable to machines which are manufactured before the date of its publication as EN.

This European Standard specifies safety requirements and their verification for the design and construction of powered rotary and cylinder lawnmowers, including pedestrian-controlled and ride-on (riding) types, and lawn and garden tractors, professional lawnmowers, and lawn and garden tractors with mowing attachments.
This European Standard is not applicable to machines covered by EN 786, lawn edgers, flail mowers, scrub cutters, automatic (robot) mowers, sickle-bar mowers,& or agricultural mowers.
This standard is not applicable to rotary lawnmowers for which the cutting means is a generally circular central drive unit on which is mounted, either one or more non-metallic filaments or one or more non-metallic, pivotally mounted cutting elements. These cutting elements rely on centrifugal force to achieve cutting with the %kinetic energy of a single cutting element not exceeding 10 J.
It describes methods for the elimination or reduction of hazards arising from their use - in addition, it specifies the type of information to be provided by the manufacturer on safe working practices.
This standard is not applicable to lawnmowers as covered by EN 60335-2-77 and EN 50338.
The list of significant hazards dealt with in this standard is given in annex A. Annex A also indicates the hazards which have not been dealt with.
The risk of contact with power driven components of ride-on machines (definition 3.28) other than the cutting means and ground contacting parts, has not been dealt with for persons other than the operator when in the driving position.
Environmental aspects and EMC have not been dealt with in this standard.&
This document is not applicable to powered lawnmowers which are manufactured before the date of its publication as EN.
NOTE   The reduction of risks from noise and vibration will be the subject of amendments to this standard now being developed.

AFNOR - Translation error (3.22)

This amendment to EN 836:1997 gives a test method for measuring the vibration at handles of powered lawn mowers and the noise at the operator position.

This European Standard specifies safety requirements and their verification for the design and construction of powered rotary and cylinder lawnmowers, including pedestrian-controlled and ride-on (riding) types, and lawn and garden tractors, professional lawnmowers, and lawn and garden tractors with mowing attachments.  This European Standard is not applicable to lawn trimmers, lawn edge trimmers, lawn edgers, flail mowers, scrub cutters, sickle-bar mowers or agricultural mowers.  This standard is not applicable to rotary lawnmowers for which the cutting means is a generally circular central drive unit on which is mounted, either one or more non-metallic filaments or one or more non-metallic, pivotally mounted cutting elements. These cutting elements rely on centrifugal force to achieve cutting with the kinetic energy of a single cutting means not exceeding 10 Joules.  It describes methods for the elimination or reduction of hazards arising from their use - in addition, it specifies the type of information to be provided by the manufacturer on safe working practices.  For the electrical aspects of electrically driven machines refer to EN 60 335.  The list of significant hazards dealt with in this standard is given in annex A. Annex A also indicates the hazards which have not been dealt with.  Environmental aspects have not been dealt with in this standard.  This European Standard applies primarily to machines which are manufactured after the date of issue of this standard.  NOTE : The reduction of risks from noise and vibration will be the subject of amendments to this standard now being developed.

This European Standard specifies safety requirements and their verification for the design and construction of hand fed, shredders/chippers with integral power source and with or without vacuum assisted collection which are designed primarily to reduce organic material to smaller pieces. It is only applicable to shredders/chippers that are designed for use outdoors in a stationary position by an operator standing on the ground. It applies to shredders/chippers with feed intake openings in the form of a single opening or an opening divided into a number of segments. The feed intake openings or segments each being of any shape that will fit into a square of 250 mm - 250 mm measured at the relevant safety distance to the cutting means.
NOTE   Feed safety openings are limited to 250 mm - 250 mm but the total feed intake opening can be any size.
This standard describes methods of elimination or reduction of hazards arising from the use of shredders/chippers. In addition it specifies the type of information to be provided by the manufacturer on safe working practices.
This standard does not cover requirements for:
-   units driven by an external power source;
-   mobile use of units which can be used in both stationary and mobile modes;
-   units with powered discharge intended to broadcast material or load vehicles;
-   units with mechanically powered feed intake or attachments;
-   units with cutting means of either one or more non-metallic filaments, or one or more non-metallic cutting elements pivotally mounted on a generally circular central drive unit, where these cutting elements rely on centrifugal force to achieve cutting, and have a kinetic energy for each single cutting means of less than 10 J;
-   electrical aspects of electrically driven shredders.
Environmental hazards and EMC have not been considered in this standard.
This standard deals with all significant hazards, hazardous situations and events relevant to shredders/chippers, when they are used as intended

This European Standard specifies safety requirements and their verification for the design and construction of pedestrian controlled integrally powered lawn aerators and scarifiers which are designed for re-generating lawns by, for instance, combing out grass, thatch and moss or cutting vertically into the lawn face using tines which rotate about a horizontal axis. It describes methods of elimination or reduction of hazards arising from their use. In addition, it specifies the type of information to be provided by the manufacturer on safe working practices.
Throughout this standard, the term "machine" applies to those machines known as aerators, scarifiers, corers, lawn rakes or grass rakes.
This standard does not apply to aerators/scarifiers made from a machine falling within the scope of EN 709:1997 when fitted with an aerating/scarifying implement, non-powered aerators, vertical axis aerators or those aerators which cut into the soil by means of a reciprocating motion or by water pressure. The electrical aspects of mains operated machines are covered by EN 60335-1. The safety aspects of batteries other than batteries for starting the engine and the electrical safety aspects of battery powered lawn aerators and scarifiers are not covered by this standard.
This standard deals with all significant hazards, hazardous situations and events relevant to scarifiers and aerators, when they are used as intended and under the conditions foreseen by the manufacturer (see Clause 4).
Environmental hazards and EMC have not been considered in this standard.
This document is not applicable to aerators/scarifiers which are manufactured before the date of publication of this document by CEN.

This amendment to EN 786:1996 gives a test method for measuring the vibration at handles of electrically powered wald behind and hand-held lawn trimmers and lawn edge trimmers and the noise at the operator position.

This European Standard specifies mechanical safety requirements and testing for design and construction of electrically powered walk-behind and hand-held lawn trimmers and lawn edge trimmers, with cutting element(s) of non-metallic filament line or freely pivoting non-metallic cutter(s) with a kinetic energy of not more than 10 J each, and used by a standing operator primarily for cutting grass.  This standards is not applicable to:  a) scissor type or lawn trimmers and lawn edge trimmers with cutting means other than those described above;  b) self-propelled lawn trimmers or lawn edge trimmers;  c) lawn trimmers or lawn edge trimmers which do not have a distance of at least 600 mm between the cutting means control and the cutting head.  The electrical aspects of electrically powered lawn trimmers and lawn edge trimmers are not covered by this standard.  The list of significant hazards dealt with in this standard is given in Annex A. Annex A also indicates the hazards which have not been dealt with.  Environmental aspects have not been considered in this standard.  This European Standard applies primarily to machines which are manufactured after the date of issue of this standard.  Note: The method of calculating the kinetic energy for the purposes of this standard is given in Annex B.

This amendment to EN 774:1996 gives a test method for measuring the vibration a at handles of hand held, integrally powered hedge trimmers and the noise at the operator position.

This European Standard specifies safety requirements and their verification for design and construction of hand held integrally driven powered hedge trimmers which are designed for use by one operator, for trimming hedges and bushes utilizing one or more linear reciprocating cutter blades.  It describes methods for the elimination or reduction of hazards arising from their use. In addition, it specifies the type of information on safe working practices to be provided by the manufacturer.  This standard is not applicable to hedge trimmers with rotating blades or hedge trimmers powered by back-pack or other external power source.  The electrical safety aspects of mains powered electric hedge trimmers are covered by EN 50144-1 and prEN 50144-2-15.  The safety aspects of batteries and the electrical safety aspects of battery powered hedge trimmers are not covered by this standard.  The list of significant hazards dealt with in this standard is given in Annex A. Annex A also indicates the hazards which have not been dealt with.  Environmental aspects have not been considered in this standard.   This standard applies primarily to machines which are manufactured after the date of issue of the standard.

This European Standard specifies safety requirements and their verification for the design and construction of pedestrian controlled integrally powered lawn aerators and scarifiers which are designed for re-generating lawns by, for instance, combing out grass, thatch and moss or cutting vertically into the lawn face using tines which rotate about a horizontal axis. It describes methods of elimination or reduction of hazards arising from their use. In addition, it specifies the type of information to be provided by the manufacturer on safe working practices.
Throughout this standard, the term "machine" applies to those machines known as aerators, scarifiers, corers, lawn rakes or grass rakes.
This standard does not apply to aerators/scarifiers made from a machine falling within the scope of EN 709:1997 when fitted with an aerating/scarifying implement, non-powered aerators, vertical axis aerators or those aerators which cut into the soil by means of a reciprocating motion or by water pressure. The electrical aspects of mains operated machines are covered by EN 60335-1. The safety aspects of batteries other than batteries for starting the engine and the electrical safety aspects of battery powered lawn aerators and scarifiers are not covered by this standard.
This standard deals with all significant hazards, hazardous situations and events relevant to scarifiers and aerators, when they are used as intended and under the conditions foreseen by the manufacturer (see Clause 4).
Environmental hazards and EMC have not been considered in this standard.
This document is not applicable to aerators/scarifiers which are manufactured before the date of publication of this document by CEN.

This European Standard deals with all significant hazards, hazardous situations and events relevant to walk-behind trimmers, powered by a combustion engine, with cutting means using non-metallic filament line or freely pivoting non-metallic cutter(s), of which the cutting elements rely on centrifugal force to achieve cutting with the kinetic energy of a single cutting element not exceeding 10 J, designed for cutting grass or similar plant material, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4).
This European Standard is not applicable to:
a)   walk-behind trimmers with cutting means other than those described above;
b)   self propelled walk-behind trimmers or walk-behind edge trimmers;
c)   lawnmowers using non-metallic filament line or freely pivoting non-metallic cutting elements with greater than 10 J kinetic energy;
NOTE 1    EN 836 applies for machines using non-metallic filament line or freely pivoting non-metallic cutting elements with greater than 10 J kinetic energy.
d)   motor mowers using metal or other solid cutting elements.
NOTE 2   EN 12733 applies for machines using metal or other solid cutting elements.
EMC and environmental hazards other than noise have not been considered in this European Standard.
This European Standard is not applicable to walk-behind trimmers which are manufactured before the date of its publication as EN.
NOTE 3   Lawn trimmers and lawn edge trimmers (electric powered) are dealt with in EN 786, grass trimmers (internal combustion engine powered) are dealt with in EN 11806 and lawn mowers (internal combustion engine powered) are dealt with in EN 836.

This European Standard specifies safety requirements and their verification for the design and construction of hand fed, shredders/chippers with integral power source and with or without vacuum assisted collection which are designed primarily to reduce organic material to smaller pieces and are used in a stationary position by an operator standing on the ground. It applies to shredders/chippers with feed intake openings in the form of a single opening or an opening divided into a number of segments.

DIN - Translation error Clause 4