EN ISO 1580:2011

Slotted pan head screws - Product grade A (ISO 1580:2011)

ISO 1580:2011 specifies the characteristics of slotted pan head screws of product grade A and with threads from M1,6 to M10 inclusive.

Flachkopfschrauben mit Schlitz - Produktklasse A (ISO 1580:2011)

Diese Internationale Norm legt die Eigenschaften von Flachkopfschrauben mit Schlitz, in Produktklasse A, mit
Gewinde von M1,6 bis M10 fest.
Falls in besonderen Fällen andere Festlegungen als die in der vorliegenden Internationalen Norm benötigt
werden, können diese den bestehenden Internationalen Normen entnommen werden, z. B. ISO 261, ISO 888,
ISO 898-1, ISO 965-2 und ISO 3506-1.

Vis à métaux à tête cylindrique large fendue - Grade A (ISO 1580:2011)

L'ISO 1580:2011 spécifie les caractéristiques des vis à métaux à tête cylindrique large fendue de grade A et de diamètre de filetage M1,6 à M10 inclus.

Vijaki z zarezano nizko valjasto glavo - Razred izdelave A (ISO 1580:2011)

Ta mednarodni standard določa značilnosti vijakov z zarezano nizko valjasto glavo razreda izdelave A in z navoji od M1,6 do vključno M10.
Če se v posebnih primerih zahtevajo specifikacije, ki so drugačne od navedenih v tem mednarodnem standardu, se lahko izberejo med obstoječimi mednarodnimi standardi, na primer ISO 261, ISO 888, ISO 898-1, ISO 965-2 in ISO 3506-1.

General Information

• Status: Published
• Publication Date: 31-Aug-2011
• Withdrawal Date: 30-Mar-2012
• ICS: 21.060.10 - Bolts, screws, studs
• Technical Committee: CEN/TC 185 - Threaded and nonthreaded mechanical fasteners and accessories
• Drafting Committee: CEN/TC 185 - Threaded and nonthreaded mechanical fasteners and accessories
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 01-Sep-2011
• Completion Date: 01-Sep-2011
• Directive: 97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
• Mandate: M/071 - Mandate to CEN for standardization in the field of Pressure equipment
• Ref Project: SIST EN ISO 1580:2011 - Slotted pan head screws - Product grade A (ISO 1580:2011)

Relations

• Replaces: EN ISO 1580:1994 - Slotted pan head screws - Product grade A (ISO 1580:1994)
• Effective Date: 18-Sep-2010

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 1580:2011
01-december-2011
1DGRPHãþD
SIST EN ISO 1580:1996
Vijaki z zarezano nizko valjasto glavo - Razred izdelave A (ISO 1580:2011)
Slotted pan head screws - Product grade A (ISO 1580:2011)
Flachkopfschrauben mit Schlitz - Produktklasse A (ISO 1580:2011)
Vis à métaux à tête cylindrique large fendue - Grade A (ISO 1580:2011)
Ta slovenski standard je istoveten z: EN ISO 1580:2011
ICS:
21.060.10 Sorniki, vijaki, stebelni vijaki Bolts, screws, studs
SIST EN ISO 1580:2011 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 1580:2011

---------------------- Page: 2 ----------------------

SIST EN ISO 1580:2011


EUROPEAN STANDARD
EN ISO 1580

NORME EUROPÉENNE

EUROPÄISCHE NORM
September 2011
ICS 21.060.10 Supersedes EN ISO 1580:1994
English Version
Slotted pan head screws - Product grade A (ISO 1580:2011)
Vis à métaux à tête cylindrique large fendue - Grade A (ISO Flachkopfschrauben mit Schlitz - Produktklasse A (ISO
1580:2011) 1580:2011)
This European Standard was approved by CEN on 8 August 2011.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2011 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 1580:2011: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 1580:2011
EN ISO 1580:2011 (E)
Contents Page
Foreword .3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 1580:2011
EN ISO 1580:2011 (E)
Foreword
This document (EN ISO 1580:2011) has been prepared by Technical Committee ISO/TC 2 "Fasteners" in
collaboration with Technical Committee CEN/TC 185 “Fasteners” the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by March 2012, and conflicting national standards shall be withdrawn at
the latest by March 2012.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 1580:1994.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 1580:2011 has been approved by CEN as a EN ISO 1580:2011 without any modification.

3

---------------------- Page: 5 ----------------------

SIST EN ISO 1580:2011

---------------------- Page: 6 ----------------------

SIST EN ISO 1580:2011

INTERNATIONAL ISO
STANDARD 1580
Third edition
2011-09-01


Slotted pan head screws — Product
grade A
Vis à métaux à tête cylindrique large fendue — Grade A




Reference number
ISO 1580:2011(E)
©
ISO 2011

---------------------- Page: 7 ----------------------

SIST EN ISO 1580:2011
ISO 1580:2011(E)

COPYRIGHT PROTECTED DOCUMENT


©  ISO 2011
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfi
...