prEN 15876

Electronic fee collection - Evaluation of on-board and roadside equipment for conformity to EN 15509

This document specifies the test suite structure (TSS) and test purposes (TPs) for evaluation of on-board equipment (OBE) and roadside equipment (RSE) to EN 15509.
Normative Annex A presents the test purposes for the OBE.
Normative Annex B presents the test purposes for the RSE.
Normative Annex C provides the protocol conformance test report (PCTR) proforma for OBE.
Normative Annex D provides the PCTR proforma for RSE.

Elektronische Gebührenerhebung - Konformitätsprüfung von Fahrzeuggeräten und straßenseitigen Einrichtungen nach EN 15509

Perception de télépéage - Évaluation de la conformité de l'équipement embarqué et de l'équipement au sol à l’EN 15509

Le présent document spécifie la structure de la suite d’essais (TSS, Test Suite Structure) et les objectifs de l’essai (TP, Test Purposes) visant à évaluer les équipements embarqués (OBE) et les équipements de bord de route (RSE) par rapport à l’EN 15509.
L’Annexe A normative présente les objectifs de l’essai pour les OBE.
L’Annexe B normative présente les objectifs de l’essai pour les RSE.
L’Annexe C normative fournit le formulaire du rapport d’essai de conformité de protocole (PCTR) pour les OBE.
L’Annexe D normative fournit le formulaire PCTR pour les RSE.

Elektronsko pobiranje pristojbin - Vrednotenje skladnosti opreme v vozilu in v obcestni napravi s standardom EN 15509

General Information

• Status: Not Published
• Publication Date: 16-Jul-2026
• ICS: 35.240.60 - IT applications in transport
• Technical Committee: CEN/TC 278 - Road transport and traffic telematics
• Drafting Committee: CEN/TC 278/WG 1 - Electronic fee collection and access control (EFC)
• Current Stage: 4020 - Submission to enquiry - Enquiry
• Start Date: 08-Aug-2024
• Due Date: 28-Feb-2025
• Completion Date: 08-Aug-2024
• Mandate: M/338 - Standardisation mandate to CEN, CENELEC and ETSI in support of interoperabilty of electonic road toll systems in the community
• Ref Project: oSIST prEN 15876:2024 - Electronic fee collection - Conformity evaluation of on-board and roadside equipment to EN 15509

Relations

• Revises: EN 15876:2023 - Electronic fee collection - Conformity evaluation of on-board and roadside equipment to EN 15509
• Effective Date: 08-Apr-2024

Standards Content (Sample)

SLOVENSKI STANDARD
01-oktober-2024
Elektronsko pobiranje pristojbin - Vrednotenje skladnosti opreme v vozilu in v
obcestni napravi s standardom EN 15509
Electronic fee collection - Conformity evaluation of on-board and roadside equipment to
EN 15509
Elektronische Gebührenerhebung - Konformitätsprüfung von Fahrzeuggeräten und
straßenseitigen Einrichtungen nach EN 15509
Perception de télépéage - Évaluation de la conformité de l'équipement embarqué et de
l'équipement au sol à l’EN 15509
Ta slovenski standard je istoveten z: prEN 15876
ICS:
03.220.20 Cestni transport Road transport
35.240.60 Uporabniške rešitve IT v IT applications in transport
prometu
43.040.15 Avtomobilska informatika. Car informatics. On board
Vgrajeni računalniški sistemi computer systems
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

DRAFT
EUROPEAN STANDARD
NORME EUROPÉENNE
EUROPÄISCHE NORM
August 2024
ICS Will supersede EN 15876:2023
English Version
Electronic fee collection - Conformity evaluation of on-
board and roadside equipment to EN 15509
Perception de télépéage - Évaluation de la conformité Elektronische Gebührenerhebung -
des équipements embarqués et des équipements Konformitätsprüfung von Fahrzeuggeräten und
d'infrastructures en bord de route à l'EN 15509 straßenseitigen Einrichtungen nach EN 15509
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 278.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 15876:2024 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 6
4 Abbreviations . 6
5 Conformance . 7
6 Test Suite Structure . 7
6.1 Structure . 7
6.2 Reference to Conformance Specifications . 8
6.3 Test Purposes . 8
6.3.1 TP Definition Conventions . 8
6.3.2 TP Naming Conventions . 9
Annex A (normative) Test purposes for on-board equipment . 11
Annex B (normative) Test purposes for roadside equipment . 68
Annex C (normative) PCTR proforma for on-board equipment . 102
Annex D (normative) PCTR proforma for roadside equipment . 112
Bibliography . 120

European foreword
This document (prEN 15876:2024) has been prepared by Technical Committee CEN/TC 278, “Intelligent
transport systems”, the secretariat of which is held by NEN.
This document is currently submitted to the CEN Enquiry.
This fourth edition of EN 15876 incorporates the following main modifications compared with the
previous version:
⎯ Correction of the superseded references to ESTI EN 300 674 1:2004 , which are replaced by
references to ESTI EN 300 674 2 1:2022, ESTI EN 300 674 2 2:2019 and ETSI TS 104 022:2024;
⎯ Amendments to improve clarity of the document.
Introduction
CEN/TC 278 has produced a set of standards that support interoperable DSRC-EFC-systems e.g.,
EN ISO 14906 (a "toolbox" for defining EFC-application transaction) and EN ISO 14907-2 (EFC
application interface conformance tests for on-board units). However, these standards are only of an
enabling nature and do not ensure technical interoperability. Therefore, EN 15509, Electronic fee
collection ― Interoperability application profile for DSRC was developed to support technical
interoperability between EFC-systems.
This document specifies the test suite structure and the test purposes for conformity evaluation of on-
board and roadside equipment designed for compliance with the requirements of EN 15509. A test
standard for evaluation of conformity of on-board and roadside equipment is a necessary element for
coherent, practical and effective appraisal of products' compliance to EN 15509.
EN 15876 provides the necessary foundation for verification of the implementation of the
interoperability requirements as stated in EN 15509:
— industry is provided with an easy-to-use toolbox for product assessment;
— operators can easily assess conformity to EN 15509 and reference to the standard in tendering
processes;
— authorities and joint undertakings may reference to the test standard when stating interoperability
requirements;
— certification organisations are given an effective tool for certification of products.
1 Scope
This document specifies the test suite structure (TSS) and test purposes (TPs) for evaluation of on-board
equipment (OBE) and roadside equipment (RSE) to EN 15509.
Normative Annex A presents the test purposes for the OBE.
Normative Annex B presents the test purposes for the RSE.
Normative Annex C provides the protocol conformance test report (PCTR) proforma for OBE.
Normative Annex D provides the PCTR proforma for RSE.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
EN 15509:2023, Electronic fee collection — Interoperability application profile for DSRC
EN 12834:2003, Road transport and traffic telematics - Dedicated Short Range Communication (DSRC) -
DSRC application layer
EN ISO 3166-1:2020, Codes for the representation of names of countries and their subdivisions — Part 1:
Country code (ISO 3166-1)
EN ISO 14816:2019, Road transport and traffic telematics — Automatic vehicle and equipment
identification — Numbering and data structure (ISO 14816)
EN ISO 14906:2023, Electronic fee collection — Application interface definition for dedicated short-range
communication (ISO 14906:2022)
EN ISO 14907-2:2021, Electronic fee collection — Test procedures for user and fixed equipment — Part 2:
Conformance test for the on-board unit application interface (ISO 14907-2:2021)
ISO/TS 17573-2:2020, Electronic fee collection — Systems architecture for vehicle-related tolling Part 2:
Vocabulary
ETSI TS 104 022:2024, Transport and Traffic Telematics (TTT); Dedicated Short Range Communication
(DSRC) transmission equipment (500 kbit/s / 250 kbit/s) operating in the 5 795 MHz to 5 815 MHz
frequency band; performance tests
ETSI EN 300 674-2-1:2022, Transport and Traffic Telematics (TTT); Dedicated Short Range
Communication (DSRC) transmission equipment (500 kbit/s / 250 kbit/s) operating in the 5 795 MHz to
5 815 MHz frequency band; Part 2: Harmonised Standard for access to radio spectrum; Sub-part 1: Road
Side Units (RSU)
ETSI EN 300 674-2-2:2019, Transport and Traffic Telematics (TTT); Dedicated Short Range
Communication (DSRC) transmission equipment (500 kbit/s / 250 kbit/s) operating in 5 795 MHz to
5 815 MHz frequency band; Part 2: Harmonised Standard for access to radio spectrum; Sub-part 2: On-
Board Units (OBU)
ETSI/TS 102 486-1-2:2008, Intelligent Transport Systems (ITS); Road Transport and Traffic Telematics
(RTTT); Test specifications for Dedicated Short Range Communication (DSRC) transmission equipment;
Part 1: DSRC data link layer: medium access and logical link control; Sub-Part 2: Test Suite Structure and
Test Purposes (TSS&TP)
ETSI/TS 102 486-2-2:2008, Intelligent Transport Systems (ITS); Road Transport and Traffic Telematics
(RTTT); Test specifications for Dedicated Short Range Communication (DSRC) transmission equipment;
Part 2: DSRC application layer; Sub-Part 2: Test Suite Structure and Test Purposes (TSS&TP)
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO/TS 17573-2:2020 apply.
ISO and IEC maintain terminology databases for use in standardization at the following addresses:
— IEC Electropedia: available at https://www.electropedia.org/
— ISO Online browsing platform: available at https://www.iso.org/obp
4 Abbreviations
For the purposes of this document, the following abbreviations apply throughout the document unless
otherwise specified.
APDU application protocol data unit
AP application process
ASN.1 abstract syntax notation one
ATS abstract test suite
BI behaviour invalid (i.e., invalid behaviour tests)
BST beacon service table
BV behaviour valid (i.e., valid behaviour tests)
DSRC dedicated short-range communication
EFC electronic fee collection
ICS implementation conformance statement
IUT implementation under test
LLC logical link control
LPDU LLC protocol data unit
MAC medium access control
OBE on-board equipment
OBU on-board unit
PCTR protocol conformance test report
PDU protocol data unit
PICS protocol implementation conformance statement
PIXIT protocol implementation extra information for testing
RSE roadside equipment
RSU roadside unit
SCTR system conformance test report
TP test purposes
TSS test suite structure
VST vehicle service table
5 Conformance
The conformance tests shall be performed as specified in Annex A and Annex B.
The conformity assessment body of the OBE and RSE, respectively, is responsible for providing a
conformance test report.
The conformity assessment body of the OBE shall complete the protocol conformance test report (PCTR)
for the OBE as specified in Annex C.
The conformity assessment body of the RSE shall complete the PCTR for the RSE as specified in Annex D.
NOTE The PCTR forms a basis for the manufacturer’s declaration of conformity.
6 Test Suite Structure
6.1 Structure
Table 1 shows the test suite structure (TSS) including its subgroups specified for the conformance testing.
Table 1 — Test Suite Structure
Group Type of IUT Behaviour
Physical layer OBE Valid behaviour
Invalid behaviour
RSE Valid behaviour
Invalid behaviour
DLC MAC sublayer OBE Valid behaviour
Invalid behaviour
RSE Valid behaviour
Invalid behaviour
DLC LLC sublayer OBE Valid behaviour
Invalid behaviour
RSE Valid behaviour
Invalid behaviour
Application layer – Functions OBE Valid behaviour
Invalid behaviour
RSE Valid behaviour
Invalid behaviour
Application Layer – Data OBE Valid behaviour
Invalid behaviour
RSE Valid behaviour
Invalid behaviour
Application Layer – Security OBE Valid behaviour
Level 0
Invalid behaviour
RSE Valid behaviour
Invalid behaviour
Group Type of IUT Behaviour
Application Layer – Security OBE
...