Aerospace series - Elements of electrical and optical connection - Test methods - Part 605: Optical elements - Return loss

This standard specifies a method of measuring the return loss of optical connection elements (including permanent connections) and fibre optic couplers.
It shall be used together with EN 2591-100.

Luft- und Raumfahrt - Elektrische und optische Verbindungselemente - Prüfverfahren - Teil 605: Optische Elemente - Rückstreuverluste

Diese Norm legt ein Messverfahren für die Rückstreuverluste von optischen Verbindungselementen (einschließlich dauerhaften Verbindungen) und LWL-Kopplern fest.
Sie ist in Verbindung mit EN 2591-100 anzuwenden.

Série aérospatiale - Organes de connexion électrique et optique - Méthodes d'essais - Partie 605: Organes optiques - Coefficient de réflexion

Aerospace series - Elements of electrical and optical connection - Test methods - Part 605: Optical elements - Return loss

General Information

Status
Published
Publication Date
11-Jun-2002
Withdrawal Date
30-Dec-2002
Technical Committee
Drafting Committee
Current Stage
9093 - Decision to confirm - Review Enquiry
Completion Date
30-Jun-2017

Buy Standard

Standard
EN 2591-605:2004
English language
5 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-maj-2004
Aerospace series - Elements of electrical and optical connection - Test methods -
Part 605: Optical elements - Return loss
Aerospace series - Elements of electrical and optical connection - Test methods - Part
605: Optical elements - Return loss
Luft- und Raumfahrt - Elektrische und optische Verbindungselemente - Prüfverfahren -
Teil 605: Optische Elemente - Rückstreuverluste
Série aérospatiale - Organes de connexion électrique et optique - Méthodes d'essais -
Partie 605: Organes optiques - Coefficient de réflexion
Ta slovenski standard je istoveten z: EN 2591-605:2002
ICS:
49.060 /HWDOVNDLQYHVROMVND Aerospace electric
HOHNWULþQDRSUHPDLQVLVWHPL equipment and systems
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 2591-605
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2002
ICS 49.060
English version
Aerospace series - Elements of electrical and optical connection
- Test methods - Part 605: Optical elements - Return loss
Série aérospatiale - Organes de connexion électrique et Luft- und Raumfahrt - Elektrische und optische
optique - Méthodes d'essais - Partie 605: Organes optiques Verbindungselemente - Prüfverfahren - Teil 605: Optische
- Coefficient de réflexion Elemente - Rückstreuverluste
This European Standard was approved by CEN on 8 February 2002.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2002 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 2591-605:2002 E
worldwide for CEN national Members.

Foreword
This document (EN 2591-605:2002) has been prepared by the European Association of Aerospace
Manufacturers (AECMA).
After enquiries and votes carried out in accordance with the rules of this Association, this Standard has
received the approval of the National Associations and the Official Services of the member countries of
AECMA, prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by December 2002, and conflicting national standards shall be
withdrawn at the latest by December 2002.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark,
Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway,
Portugal, Spain, Sweden, Switzerland and the United Kingdom
1 Scope
This standard specifies a method of measuring the return loss of optical con
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.