prEN 6049-009
(Main)Aerospace series - Electrical cables, installation - Protection sleeve in meta-aramid fibres - Part 009: Self-wrapping fire protection sleeve, flexible, post-installation, operating temperature from -55 °C to 260 °C - Product standard
Aerospace series - Electrical cables, installation - Protection sleeve in meta-aramid fibres - Part 009: Self-wrapping fire protection sleeve, flexible, post-installation, operating temperature from -55 °C to 260 °C - Product standard
This document specifies the characteristics of post installation flexible self-wrapping fire protection sleeves for electrical cable and cable bundles, providing 360° fire protection to electrical harnesses. The sleeve assembly gives fire resistance protection to the internal electrical harness against fire for five minutes and ensures that the electrical characteristics of cables will not be degraded.
Luft- und Raumfahrt - Elektrische Leitungen, Installation - Schutzschläuche aus Meta-Aramidfasern - Teil 009: Selbstverschließender Schutzschlauch, flexibel, nachträglich montierbar, Temperaturbereich von -55 °C bis 260 °C - Produktnorm
No Scope available
Série aérospatiale - Câbles électriques, installation - Gaine de protection en fibres méta-aramides - Partie 009 : Gaine de protection anti-feu auto-fermable, souple, après montage, température d'utilisation de -55 °C à 260 °C - Norme de produit
Le présent document spécifie les caractéristiques des gaines de protection souples, auto-fermables et résistantes au feu après montage pour câbles et torons de câbles électriques, fournissant une protection contre le feu à 360° aux harnais électriques. Le montage de la gaine fournit une protection contre le feu au faisceau électrique interne pendant cinq minutes et garantit la non-dégradation des caractéristiques électriques des câbles.
Aeronavtika - Električni kabli, namestitev - Zaščitne obojke iz meta-aramidnih vlaken - 009. del: Samoovojna požarno zaščitna obojka, zvijava, z možnostjo poznejše montaže, delovna temperatura od -55 °C do 260 °C - Standard za proizvod
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-julij-2024
Aeronavtika - Električni kabli, namestitev - Zaščitne obojke iz meta-aramidnih
vlaken - 009. del: Samoovojna požarno zaščitna obojka, zvijava, z možnostjo
poznejše montaže, delovna temperatura od -55 °C do 260 °C - Standard za
proizvod
Aerospace series - Electrical cables, installation - Protection sleeve in meta-aramid fibres
- Part 009: Self-wrapping fire protection sleeve, flexible, post-installation, operating
temperature from -55 °C to 260 °C - Product standard
Luft- und Raumfahrt - Elektrische Leitungen, Installation - Schutzschläuche aus Meta-
Aramidfasern - Teil 009: Selbstverschließender Schutzschlauch, flexibel, nachträglich
montierbar, Temperaturbereich von -55 °C bis 260 °C - Produktnorm
Série aérospatiale - Câbles électriques, installation - Gaine de protection en fibres méta-
aramides - Partie 009 : Gaine de protection anti-feu auto-fermable, souple, après
montage, température d'utilisation de –55 °C à 260 °C - Norme de produit
Ta slovenski standard je istoveten z: prEN 6049-009
ICS:
29.060.20 Kabli Cables
49.060 Letalska in vesoljska Aerospace electric
električna oprema in sistemi equipment and systems
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
DRAFT
EUROPEAN STANDARD
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2024
ICS 49.060 Will supersede EN 6049-009:2016
English Version
Aerospace series - Electrical cables, installation -
Protection sleeve in meta-aramid fibres - Part 009: Self-
wrapping fire protection sleeve, flexible, post-installation,
operating temperature from -55 °C to 260 °C - Product
standard
Série aérospatiale - Câbles électriques, installation - Luft- und Raumfahrt - Elektrische Leitungen,
Gaine de protection en fibres méta-aramides - Partie Installation - Schutzschläuche aus Meta-Aramidfasern -
009 : Gaine de protection anti-feu auto-fermable, Teil 009: Selbstverschließender Schutzschlauch,
souple, après montage, température d'utilisation de - flexibel, nachträglich montierbar, Temperaturbereich
55 °C à 260 °C - Norme de produit von -55 °C bis 260 °C - Produktnorm
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee ASD-
STAN.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 6049-009:2024 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Required characteristics . 5
4.1 Requirements . 5
4.2 Composition . 5
4.3 Dimensions and mass . 7
4.4 Colour, materials and tracer line identification . 8
4.4.1 Colour . 8
4.4.2 Materials . 8
4.4.3 Tracer line identification . 8
4.4.4 Temperature range . 8
5 Test methods . 8
6 Designation . 10
7 Marking . 11
Annex A (informative) Standard evolution form . 12
Bibliography . 13
European foreword
This document (prEN 6049-009:2024) has been prepared by ASD-STAN.
After enquiries and votes carried out in accordance with the rules of this Association, this document has
received the approval of the National Associations and the Official Services of the member countries of
ASD-STAN, prior to its presentation to CEN.
This document is currently submitted to the CEN Enquiry.
This document will supersede EN 6049-009:2016.
EN 6049-009:2016:
— prEN 6049-009 (P3), 01/2019 — Editorial improvements, reference to AS 23053B and
modification of the overlap centre layer from 130° to 90° for size code 10.
1 Scope
This document specifies the characteristics of post installation flexible self-wrapping fire protection
sleeves for electrical cable and cable bundles, providing 360° fire protection to electrical harnesses. The
sleeve assembly gives fire resistance protection to the internal electrical harness against fire for five
minutes and ensures that the electrical characteristics of cables will not be degraded.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
EN 2825, Aerospace series — Burning behaviour of non metallic materials under the influence of radiating
heat and flames — Determination of smoke density
EN 2826, Aerospace series — Burning behaviour of non metallic materials under the influence of radiating
heat and flames — Determination of gas components in the smoke
EN 3844-1, Aerospace series — Flammability of non-metallic materials — Part 1: Small burner test,
vertical — Determination of the vertical flame propagation
EN 6049-001, Aerospace series — Electrical cables, installation — Protection sleeve in meta-aramid fibres
— Part 001: Technical specification
EN 6059 (all parts), Aerospace series — Electrical cables, installation — Protection sleeve — Test methods
Insulation sleeving, electrical, heat-shrinkable, general specification for
AS 23053B,
3 Terms and definitions
For the purposes of this document, the terms and definitions given in EN 6049-001 and the following
apply.
ISO
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.