EN ISO 1248:2008
(Main)Iron oxide pigments - Specifications and methods of test (ISO 1248:2006 including Technical Corrigendum 1:2007)
Iron oxide pigments - Specifications and methods of test (ISO 1248:2006 including Technical Corrigendum 1:2007)
ISO 1248:2006 specifies the requirements and the corresponding methods of test for all manufactured and natural iron oxide pigments, in dry form, suitable for general use. These pigments are identified by Colour Index Nos. red 101 and 102, yellow 42 and 43, brown 6 and 7, and black 11, and includes rapid-dispersion pigments.
ISO 1248:2006 does not cover micaceous iron oxide pigments, transparent iron oxide pigments, granular grey iron oxide or magnetic iron oxide pigments other than those of Colour Index Pigment black 11.
Eisenoxid-Pigmente - Anforderungen und Prüfverfahren (ISO 1248:2006, einschließlich Technische Korrektur 1:2007)
Diese Internationale Norm legt die Anforderungen und die entsprechenden Prüfverfahren für alle synthetisch hergestellten und natürlichen Eisenoxid-Pigmente, in trockenem Zustand fest. Diese Pigmente sind zur allgemeinen Verwendung geeignet und durch die Colour Index-Nummern ) Rot 101 und 102, Gelb 42 und 43, Braun 6 und 7 sowie Schwarz 11 charakterisiert und schließen schnell dispergierbare Pigmente.
Diese Internationale Norm legt keine Anforderungen an Eisenglimmer-Pigmente fest (siehe Anmerkung 1). Sie schließt auch transparente Eisenoxid-Pigmente, graue Eisenoxide in Granulatform (siehe Anmerkung 2) sowie magnetische Eisenoxid-Pigmente mit Ausnahme von Colour Index Schwarz 11 aus.
ANMERKUNG 1 Die Anforderungen und die entsprechenden Prüfverfahren für Eisenglimmer-Pigmente sind in ISO 10601 enthalten.
ANMERKUNG 2 Graue Eisenoxide in Granulatform sind zu abrasiv für die allgemeine Verwendung.
Pigments à base d'oxydes de fer - Spécifications et méthodes d'essai (ISO 1248:2006 Corrigendum téchnique 1:2007 inclus)
L'ISO 1248:2006 spécifie les exigences et les méthodes d'essai correspondantes pour tous les pigments à base d'oxydes de fer artificiels et naturels, sous forme sèche, destinés à un usage général. Ces pigments sont identifiés par les numéros suivants du Colour Index: Red 101 et 102, Yellow 42 et 43, Brown 6 et 7 et Black 11, et comprennent les «pigments à dispersion rapide».
L'ISO 1248:2006 ne couvre pas les pigments à base d'oxydes de fer micacés, les pigments à base d'oxydes de fer transparents, les pigments à base d'oxydes de fer gris granuleux ou les pigments à base d'oxydes de fer magnétiques autres que ceux correspondant au pigment Black 11 du Colour Index.
Pigmenti železovega oksida - Specifikacije in metode preskušanja (ISO 1248:2006, vključno s tehničnim popravkom 1:2007)
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Eisenoxid-Pigmente - Anforderungen und Prüfverfahren (ISO 1248:2006, einschließlich Technische Korrektur 1:2007)Pigments à base d'oxydes de fer - Spécifications et méthodes d'essai (ISO 1248:2006 Corrigendum téchnique 1:2007 inclus)Iron oxide pigments - Specifications and methods of test (ISO 1248:2006 including Technical Corrigendum 1:2007)87.060.10Pigmenti in polnilaPigments and extendersICS:Ta slovenski standard je istoveten z:EN ISO 1248:2008SIST EN ISO 1248:2009en01-marec-2009SIST EN ISO 1248:2009SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN ISO 1248March 2008ICS 87.060.10 English VersionIron oxide pigments - Specifications and methods of test (ISO1248:2006 including Technical Corrigendum 1:2007)Pigments à base d'oxydes de fer - Spécifications etméthodes d'essai (ISO 1248:2006 Corrigendum téchnique1:2007 inclus)Eisenoxid-Pigmente - Anforderungen und Prüfverfahren(ISO 1248:2006, einschließlich Technische Korrektur1:2007)This European Standard was approved by CEN on 28 February 2008.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2008 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN ISO 1248:2008: ESIST EN ISO 1248:2009
Reference numberISO 1248:2006(E)© ISO 2006
INTERNATIONAL STANDARD ISO1248Second edition2006-09-15Iron oxide pigments — Specifications and methods of test Pigments à base d'oxydes de fer — Spécifications et méthodes d'essai
ISO 1248:2006(E) PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
©
ISO 2006 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's member body in the country of the requester. ISO copyright office Case postale 56 • CH-1211 Geneva 20 Tel.
+ 41 22 749 01 11 Fax
+ 41 22 749 09 47 E-mail
copyright@iso.org Web
www.iso.org Published in Switzerland
ii © ISO 2006 – All rights reserved
ISO 1248:2006(E) © ISO 2006 – All rights reserved iiiContents Page Foreword.iv 1 Scope.1 2 Normative references.1 3 Description.2 4 Classification.2 4.1 General.2 4.2 Criteria for classification.2 5 Designation.4 6 Required characteristics and associated tolerances.5 7 Sampling.5 8 Determination of total iron, expressed as iron(III) oxide (Fe2O3).7 8.1 Method A.7 8.2 Method B.9 9 Test for presence of lead chromate.12 9.1 Reagents.12 9.2 Procedure.12 10 Determination of total calcium.12 10.1 Flame atomic absorption spectrometric (AAS) method.12 10.2 Titrimetric method.16 11 Test for organic colouring matter.18 11.1 Reagents.18 11.2 Procedure.18 11.3 Expression of results.18 12 Test report.19 Annex A (informative)
Decontamination of the waste solutions containing mercury.20 Bibliography.21
ISO 1248:2006(E) iv © ISO 2006 – All rights reserved Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 1248 was prepared by Technical Committee ISO/TC 35, Paints and varnishes, Subcommittee SC 2, Pigments and extenders. This second edition cancels and replaces the first edition (ISO 1248:1974), which has been technically revised. SIST EN ISO 1248:2009
INTERNATIONAL STANDARD ISO 1248:2006(E) © ISO 2006 – All rights reserved 1Iron oxide pigments — Specifications and methods of test 1 Scope This International Standard specifies the requirements and the corresponding methods of test for all manufactured and natural iron oxide pigments, in dry form, suitable for general use. These pigments are identified by Colour Index Nos.1) red 101 and 102, yellow 42 and 43, brown 6 and 7 and black 11, and includes “rapid-dispersion pigments”. This International Standard does not cover micaceous iron oxide pigments (see Note 1), transparent iron oxide pigments, granular grey iron oxide (see Note 2) or magnetic iron oxide pigments other than those of Colour Index Pigment black 11. NOTE 1 The requirements and the corresponding methods of test for micaceous iron oxide pigments are specified in ISO 10601. NOTE 2 Granular grey iron oxides are too abrasive for general use. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 385–1, Laboratory glassware — Burettes — Part 1: General requirements ISO 648, Laboratory glassware — One-mark pipettes ISO 787-1, General methods of test for pigments and extenders — Part 1: Comparison of colour of pigments ISO 787-2, General methods of test for pigments and extenders — Part 2: Determination of matter volatile at 105 °C ISO 787-3, General methods of test for pigments and extenders — Part 3: Determination of matter soluble in water — Hot extraction method ISO 787-4, General methods of test for pigments and extenders — Part 4: Determination of acidity or alkalinity of the aqueous extract ISO 787-5, General methods of test for pigments and extenders — Part 5: Determination of oil absorption value ISO 787-7, General methods of test for pigments and extenders — Part 7: Determination of residue on sieve — Water method — Manual procedure
1) The Colour Index is published by The Society of Dyers and Colourists, PO Box 244, Perkin House, 82 Grattan Road, Bradford, West Yorkshire BD1 2JB, United Kingdom; and the American Association of Textile Chemists and Colorists, National Headquarters, Box 12215, Research Triangle Park, N.C. 27709, USA. SIST EN ISO 1248:2009
ISO 1248:2006(E) 2 © ISO 2006 – All rights reserved ISO 787-9, General methods of test for pigments and extenders — Part 9: Determination of pH value of an aqueous suspension ISO 787-13, General methods of test for pigments and extenders — Part 13: Determination of water-soluble sulfates, chlorides and nitrates ISO 787-16, General methods of test for pigments and extenders — Part 16: Determination of relative tinting strength (or equivalent colouring value) and colour on reduction of coloured pigments — Visual comparison method ISO 1042, Laboratory glassware — One-mark volumetric flasks ISO 3696, Water for analytical laboratory use — Specification and test methods ISO 15528, Paints, varnishes and raw materials for paints and varnishes — Sampling 3 Description The iron oxide pigments covered by this International Standard consist mainly of iron oxides and hydrated iron oxides. Their colours are usually red, yellow, brown or black. 4 Classification 4.1 General In this International Standard, iron oxide pigments are classified as follows: ⎯ by groups depending on their colour; ⎯ by categories depending on their iron content, expressed as iron(III) oxide; ⎯ by
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.