prEN 14499
(Main)Textile floor coverings - Minimum requirements for carpet underlays
Textile floor coverings - Minimum requirements for carpet underlays
This document specifies minimum performance requirements for fibrous, non-fibrous and combined underlays.
Textile Bodenbeläge - Mindestanforderungen an Teppichunterlagen
Dieses Dokument legt die Mindestanforderungen an die Gebrauchseigenschaften von Faser , faserfreien und kombinierten Teppichunterlagen fest.
Revêtements de sol textiles - Exigences minimales relatives aux thibaudes de moquette
Le présent document spécifie les exigences de performances minimales applicables aux thibaudes fibreuses, non fibreuses et mixtes.
Tekstilne talne obloge - Razvrščanje podlog za preproge
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN 14499:2022
01-marec-2022
Tekstilne talne obloge - Razvrščanje podlog za preproge
Textile floor coverings - Classification of carpet underlays
Textile Bodenbeläge - Klassifizierung von Teppichunterlagen
Revêtements de sol textiles - Classification des thibaudes de moquette
Ta slovenski standard je istoveten z: prEN 14499
ICS:
97.150 Talne obloge Floor coverings
oSIST prEN 14499:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 14499:2022
---------------------- Page: 2 ----------------------
oSIST prEN 14499:2022
DRAFT
EUROPEAN STANDARD
prEN 14499
NORME EUROPÉENNE
EUROPÄISCHE NORM
January 2022
ICS 97.150 Will supersede EN 14499:2015
English Version
Textile floor coverings - Classification of carpet underlays
Revêtements de sol textiles - Classification des Textile Bodenbeläge - Klassifizierung von
thibaudes de moquette Teppichunterlagen
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 134.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 14499:2022 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 14499:2022
prEN 14499:2022 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Sampling . 5
5 Performance . 5
6 Classification. 7
7 Marking . 8
Annex A (normative) Method for determination of resistance to breaking and cracking . 9
A.1 Principle . 9
A.2 Apparatus . 9
A.3 Test specimen . 9
A.4 Procedure . 9
A.5 Test report . 9
Annex B (normative) Determination of work of compression of underlay . 11
2
---------------------- Page: 4 ----------------------
oSIST prEN 14499:2022
prEN 14499:2022 (E)
European foreword
This document (prEN 14499:2022) has been prepared by Technical Committee CEN/TC 134 “Resilient,
textile, laminate and modular mechanical locked floor coverings”, the secretariat of which is held by NBN.
This document is currently submitted to the CEN Enquiry.
This document will supersede EN 14499:2015.
In comparison with the previous edition, the following technical modifications have been made:
— Changes to the title;
— Changes to the scope.
3
---------------------- Page: 5 ----------------------
oSIST prEN 14499:2022
prEN 14499:2022 (E)
1 Scope
This document specifies minimum performance requirements for fibrous, non-fibrous and combined
underlays, together with their classification for five categories of intended use/application.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
EN ISO 9405, Textile floor coverings — Assessment of changes in appearance (ISO 9405)
EN ISO 13934-1, Textiles — Tensile properties of fabrics — Part 1: Determination of maximum force and
elongation at maximum force using the strip method (ISO 13934-1)
ISO 1765, Machine-made textile floor coverings — Determination of thickness
ISO 1957, Machine-made textile floor coverings — Selection and cutting of specimens for physical tests
ISO 2094, Textile floor coverings — Determination of thickness loss under dynamic loading
ISO 3415, Textile floor coverings — Determination of thickness loss after brief, moderate static loading
ISO 3416, Textile floor coverings — Determination of thickness loss after prolonged, heavy static loading
ISO 10361, Textile floor coverings — Production of changes in appearance by means of Vettermann drum
and hexapod tumbler tester
BS 4098, Method for the determination of thickness, compression and recovery characteristics of textile floor
coverings
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
— IEC Electropedia: available at https://www.electropedia.org/
— ISO Online browsing platform: available at https://www.iso.org/obp
3.1
needlefelt fibrous underlay
material made wholly of fibres entangled or matted together by needling of a fibre batt
3.2
impregnated fibrous underlay
material made of fibres consolidated by impregnation with a binding agent
Note 1 to entry: A woven, nonwoven or film scrim may be included in a fibrous underlay for support during
manufacture.
4
---------------------- Page:
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.